Hi
all,
As you already aware,
we have beta firmware for the airBridge as well as the airPointPRO series to
address occasional disassociation. The firmware has the watchdog feature in
built into it, a timer which will reset the unit under certain conditions,
this will ensure that the link is up most of the time unless there is some
physical damage to the device. This was after many have reported that a simple
power cycle, software reset or refresh in the site survey will establish back
the connection.
This firmware is
currently under beta testing and we have got a positive feedback,
looking for more
responses from customers before we do a final release. Anyone who has tested
thoroughly and can produce the report in details on the observation (comparing
the beta and current firmware, pre or post-june units) will get a token of
appreciation. It is given away while stock last.
If you have any
airBridge or airPointPro (in client bridge, repeater or wireless bridge mode)
that exhibit the above symptom, you are welcome to test the beta firmware
below by clicking the firmware link.
airBridge
Series
The
firmware
0.01.08 for the airBridge
series and the instruction
guide is available for the
download.
Please go through the firmware upgrade instruction to upgrade
firmware on the airBridge series
The firmware - Wireless Bridge (Ver. 0.01.08).rom
does not include the complete software package. Please use the existing latest
airBridge simpleMonitor software version (1.5x or 1.6x).
airPointPRO
Series
The
firmware 1.4j9 for the airPointPRO
series and the instruction
guide is available for the
download.
Please go through the
firmware upgrade instruction to upgrade firmware on the airPointPRO series.
The firmware - 802.11
APP (Ver. 1.4j.9).rom does not include the complete software package. Please
use the existing latest airPointPRO simpleMonitor software version
(1.6x).
