RE: [smartBridges] Storing MAC authorized MAC on the AP

[Rudolph Worrell]

I am going APTotal in CB mode ------ APPO in AP mode.  The AP Total sees the APPO but is unable to associate with it.  I can associate with other AP's but not this one.  So I cannot do any of the items listed below.  I will have to go to that APPO on the water tower when the facilities opens. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]On Behalf Of The Wirefree Network Sent: Sunday, October 05, 2003 12:22 PM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Storing MAC authorized MAC on the AP I have never lost my internal MACs.  I’ve been using sB devices only for about 11 months now.  I have seen and heard of everything…but I have not heard of an aPPo losing the internal MAC addresses.   Have you loaded up the 1.08 firmware on your client device?   Have you tried unplugging it for anywhere from 10 seconds to 15 minutes?   Can you PING your client device?   Can you log into the client device?   Can you do a “restore to factory default” on it (assuming you used simpleDeploy)?   Try starting a continuous PING back to your gateway, then doing a power reset on the client device.   Do you have the latest firmware on the aPPo?   Is their tooooo much interference in your area to allow association from your client device??   If all this don’t work, then you may have a bad aPPo.   Sully   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Rudolph Worrell Sent: Sunday, October 05, 2003 7:34 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Storing MAC authorized MAC on the AP   I store authorized MACS on my AP's and my my server.  Yesterday I lost connection to the head end AP.  I can see it at 100% RSSI and 80 to 90 Link Quality but cannot associate.   Could the AP have lost the MAC "authorisation" (notice the spelling) and went back to the default FF FF FF FF etc?  I hope not because this would be scary to use this feature again. t Any help or input is appreciated.  I am currently down all the way around and just sitting on my duff until the city opens on Monday morning when the Tower is accessible.   I am thinking of using a true backhaul with other devices and simply connecting the SB devices to a switch for distribution.  Anyone else doing this also?