Re: [smartBridges] RSSI Percentages

[Dennis Burgess]

Title: Message

Dude, I understand how you feel.   Most of my customers run from 40-50 RSSI, and my backhaul to one of my towers is only 38-40%.  But dude, it all works, fast and sweet!    Dennis   ----- Original Message ----- From: Pascal Losier To: [EMAIL PROTECTED] Sent: Wednesday, October 08, 2003 9:43 AM Subject: RE: [smartBridges] RSSI Percentages I think those number are almost impossible to get for me.   I have an APPT at 7 miles away & a Airbridge outdoor on a 19db Arcwireless panel for the CPE.   This is my backhaul where I get my bandwith for the hole network right now.   I get beetween 47% & 52%. The link is fine sinces 3 month.   Getting numbers of 60% is hard to get.   Around here, I notice that higher than 35%, I got no problem.   Do you meen 24db dish face to face with Smatbridge gear will get you 60% & up ????   If Smartbridge assume being OK at 20 Miles, It should mean having at lease 60% for RSSI at this distance.   Is anybody on this forums doing 20miles shot ????  What are your RSSI ????         -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Chris Chance Sent: Wednesday, October 08, 2003 10:29 AM To: '[EMAIL PROTECTED]' Subject: RE: [smartBridges] RSSI Percentages I have SB links with high download speeds im talking between 100kB-150kB/sec download speed however they have problems sending mail with attachments sometimes... Mail servers fine what could this be simplespeed didn't seem to help in this case L   Chris   From: Seeni Mohamed [mailto:[EMAIL PROTECTED] Sent: Tuesday, October 07, 2003 7:12 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] RSSI Percentages   Hi Dennis,   In order to achieve better upstream and downstream link, the minimum acceptable level of RSSI is about 60 -65 %, however ideally the minimum for a good stable link should be around 75%. With the help of our latest simplMonitor, you can define your own RSSI value. These values are calculated from the Base band values (0-40) and the maximum is 40. The values are converted 0-100 scale with formula (-10dbm) and displayed as % values. The link quality is displayed only as % but is the same conversion applies to RSSI also. The percentage value should be able to provide an indication how good the Received signal is. (E.g. BB value 40 => 100 %; BB value 20 => 50% )   Seeni sB Tech Support [EMAIL PROTECTED]   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Tuesday, October 07, 2003 8:21 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] RSSI Percentages   What is the Minimum RSSI of 1, 2 and so on speeds?   Dennis   ----- Original Message ----- From: Seeni Mohamed To: [EMAIL PROTECTED] Sent: Monday, October 06, 2003 7:14 PM Subject: RE: [smartBridges] RSSI Percentages   The percentage value should be able to provide an indication how good the Received signal is. You can use the new simpleMonitor Version to define your own RSSI to dbm conversion. This way, you will have close dbm reading with the other vendor reading. We have given this option to key in the own values, but most of the time the default values works much better than the manual method.   Seeni sB Tech Support [EMAIL PROTECTED]   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dennis Burgess Sent: Tuesday, October 07, 2003 7:56 AM To: [EMAIL PROTECTED] Subject: [smartBridges] RSSI Percentages   I have heard of people saying that the RSSI in the ABOs is really not a valid method of determing a link.  What are good values to put in ?   Dennis