Hi Scott,
The SimpleSpeed does not changes the MTU interface
settings and does the changes in the TCP/IP windows size
only.
To increase the throughput speed at the CPE,
simpleSpeed optimizes these protocol stack parameters to improve performance
of wireless LANs which make use of smartBridges products (airBridge, airPoint,
airPointPRO).
Here are the changes done in the
registry.
|
GlobalMaxTcpWindowSize |
REG_DWORD |
131400 (decimal) |
|
TcpWindowSize |
REG_DWORD |
131400 (decimal) |
|
Tcp1323Opts |
REG_DWORD |
1 |
Thank you
Best regards,
Seeni
sB Tech support
[EMAIL PROTECTED]
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
Behalf Of shoffman
Sent: Thursday, October 09, 2003 11:27
PM
To: [EMAIL PROTECTED]
Subject: [smartBridges] simplespeed
I
know that we should trust our vendor completely....
But does anyone know if simplespeed adjusts the
default MTU settings on
the interface? If so.. what does it set it
to?
Scott
----------ANNOUNCEMENT----------
Don't forget to register for WISPCON
IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
The PART-15.ORG smartBridges Discussion
List
To Join: mailto:[EMAIL PROTECTED] (in the body type
subscribe smartBridges <yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body
type unsubscribe smartBridges)
Archives: http://archives.part-15.org
