Patrick Hmm I would push them a little more and ask why the FCC cert it only for 158mW and what happens to the side lobs of the radio when set to 200mW. At least with our testing the Senao cards are not able to keep with-in the FCC specification on where the side lobs should be, which means that the card is limited to the power output on the cert. Also PLEASE do not take this incorrectly I think the Telex design is a good one and they have great antennas, but not the Senao card in that the spec have never been accurate.
Sincerely, Tony Morella Demarc Technology Group, A Wireless Solution Provider Office: 908-996-7995 Fax: 908-847-0202 http://www.demarctech.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Patrick Sent: Wednesday, October 15, 2003 3:58 PM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Telex CPE I spoke with Telex, here is the response: "This is due to the variation within the radio of +/- 1db which calculates to the range of 158-251 mW. Hope this helps." Makes sense I guess, just never saw someone be honest like that. ----- Original Message ----- From: "shoffman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Wednesday, October 15, 2003 2:58 PM Subject: Re: [smartBridges] Telex CPE > Direct from Product Page: > > Actually they say 158-251 mW on the radio, but you are right. (It's > curious, the power output doesn't read as if its adjustable, so do > their radios very that much in signal strength? > > Scott > > > > -----Original Message----- > From: [EMAIL PROTECTED] > To: [EMAIL PROTECTED] > Date: Wed, 15 Oct 2003 13:32:58 -0400 (EDT) > Subject: Re: [smartBridges] Telex CPE > > > 41dbm is 12 Watts. I think the TOTAL gain of the radio + antenna is > > 41db, and the antenna by itself is 18dbi. This would give you a > > 23dbm (41-18) radio. 23dbm is a perfect 200mw. > > > > On Wed, 15 Oct 2003, shoffman wrote: > > > > > Question, 41 db radio with 18 db antenna. Doesn't that bust the > > > FCC rules? > > > > > > -----Original Message----- > > > From: "Patrick" <[EMAIL PROTECTED]> > > > To: <[EMAIL PROTECTED]> > > > Date: Wed, 15 Oct 2003 09:57:32 -0400 > > > Subject: Re: [smartBridges] Telex CPE > > > > > > > I have 2 of them...They work well with APPO... > > > > ----- Original Message ----- > > > > From: "Joe Laura" <[EMAIL PROTECTED]> > > > > To: <[EMAIL PROTECTED]> > > > > Sent: Wednesday, October 15, 2003 8:24 AM > > > > Subject: Re: [smartBridges] Telex CPE > > > > > > > > > > > > > Has anyone used a Telex CPE with a APPO? I have 2 clients I > > > > > need > > more > > > > power > > > > > in order to get a good link. Im just wondering if they play > > > > > nice > > > > together. > > > > > Thanks!! Joe > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > > Don't forget to register for WISPCON IV > > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type > > > > > subscribe > > > > smartBridges <yournickname> > > > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe > > > > smartBridges) > > > > > Archives: http://archives.part-15.org > > > > > > > > > > > > ----------ANNOUNCEMENT---------- > > > > Don't forget to register for WISPCON IV > > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > > > The PART-15.ORG smartBridges Discussion List > > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > > > smartBridges <yournickname> To Remove: > > > > mailto:[EMAIL PROTECTED] (in the body type > > unsubscribe > > > > smartBridges) > > > > Archives: http://archives.part-15.org > > > > > > ----------ANNOUNCEMENT---------- > > > Don't forget to register for WISPCON IV > > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > > > The PART-15.ORG smartBridges Discussion List > > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> > > > To Remove: mailto:[EMAIL PROTECTED] (in the body type > > > unsubscribe > > smartBridges) > > > Archives: http://archives.part-15.org > > > > > > > ----------ANNOUNCEMENT---------- > > Don't forget to register for WISPCON IV > > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > > > The PART-15.ORG smartBridges Discussion List > > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe > > smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] > > (in the body type unsubscribe > > smartBridges) > > Archives: http://archives.part-15.org > > ----------ANNOUNCEMENT---------- > Don't forget to register for WISPCON IV > http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm > > The PART-15.ORG smartBridges Discussion List > To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> > To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) > Archives: http://archives.part-15.org > ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
