It's plugged into the same switch as the other AP, so I don't think duplex
is an issue. New AP has it's own IP address. I did assign it the same
address as my FreeBSD/dummynet server for a while and had a conflict there,
but I fixed that and re-booted the server and AP. If the ARP tables were
screwed up, how would I fix that?

Thanks,
Roger

----- Original Message ----- 
From: "Breiland, Derek" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, October 28, 2003 1:09 PM
Subject: RE: [smartBridges] Slow download speed


> Duplex mismatch on the ethernet ports?  I would expect you to see a
problem
> with both up and down at that point but...  Are you using the same ip
> address on both the old and new AP's?  ARP tables may be a problem?
>
> -----Original Message-----
> From: Roger Howard [mailto:[EMAIL PROTECTED]
> Sent: Tuesday, October 28, 2003 12:06 PM
> To: [EMAIL PROTECTED]
> Subject: [smartBridges] Slow download speed
>
> I just installed an APPO on Sunday, with 3' of LMR400 going to a Pac
> Wireless 16dbi 90 degree horizontally polarized sector antenna. It's 100'
> high on the side of a water tower.
>
> I'm seeing significantly improved signal strengths at customer sites than
I
> was getting with the old 14.5dbi Maxrad on my first access point, but
> download speeds are terrible. I'm seeing around 1200k upload speed fairly
> consistantly (figure my T1 is the bottleneck there) but the download speed
> is very variable. Anything from the test failing, or maybe 90k or
sometimes
> several hundred k. When I switch back to the original access point (rotate
> the antenna for correct polarity) the performance improves.
>
> Does anyone have any idea what may be causing this? I'm going to try an
18v
> power supply since there is about 150' of CAT5. Any other ideas what might
> be causing it? I'll confirm soon whether the 18v helped.
>
> Thanks,
> Roger
>
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
> smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
> smartBridges)
> Archives: http://archives.part-15.org
> ----------ANNOUNCEMENT----------
> Don't forget to register for WISPCON IV
> http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm
>
> The PART-15.ORG smartBridges Discussion List
> To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe
smartBridges <yournickname>
> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe
smartBridges)
> Archives: http://archives.part-15.org

----------ANNOUNCEMENT----------
Don't forget to register for WISPCON IV
http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm

The PART-15.ORG smartBridges Discussion List
To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges 
<yournickname>
To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges)
Archives: http://archives.part-15.org  

Reply via email to