Thats my problem I have users at full pop 1.5 meg and some as low as 386 I just got my new bonded t-1s here at the noc and am pulling 2.7 megs up and down now that I have the radios set to 2 megs no one is seeing really anything more then 1 meg. Remember when setting to 2 meg you are actually getting maybe 1 meg 11 meg you get 5.5 meg from my understanding..
----- Original Message ----- From: "Scott Wells" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, October 29, 2003 7:47 AM Subject: RE: [smartBridges] Forcing the AP to 2 MB I really just depends on the bandwidth you are selling. I have 128K up to 1MB so I have set all of my clients to 11MB with autofallback to 5MB in case of interference. I have B/W allocated with a Mikrotik box. -Scott Wells -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sam Sent: Wednesday, October 29, 2003 8:54 AM To: [EMAIL PROTECTED] Subject: [smartBridges] Forcing the AP to 2 MB I have a question...after reading a few posts on here, I'm wondering the implications of setting my APs to 2 MB, no auto-fallback (or even 1 MB, no auto-fallback.) Would this be a good idea? By design, none of my customers get more than 384k down, 256k up. And those are business customers that are mainly all on only during the daytime. Would this be a good idea? Also, I'm assuming that setting the AP to say, 1 MB only, that this setting will override the CPE settings because the AP will only talk at this speed and no faster? I'd appreciate any thoughts on this. Thanks! Sam ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org ----------ANNOUNCEMENT---------- Don't forget to register for WISPCON IV http://www.wispcon.info/us/wispcon-iv/wispcon-iv.htm The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
