Realize that the Smartbridge stuff is pretty sensative so you may be seeing more of a cross talk effect then your previous gear. You should see if "tuning down" the clients helps your situation.
You should be able to see if your storm theory is correct with the Ethernet statistics on the AP's. Scott -----Original Message----- From: "Shane Mitchell" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Date: Fri, 31 Oct 2003 10:06:42 -0600 Subject: [smartBridges] Throughput errors on Airpoint Pro Outdoor > I am a new user of these items with 4 of them on a water tower. Each > AP > has approximately 25 clients presently. The old AP's I was using were > providing about 2.5 mbps at peak, however, we are only getting about > 1.8mbps at peak now. Also, clients are reporting traffic being > "Jerky", > with bursts of speed, followed by lags. I have tinkered with RTS/CTS, > but it has not improved it, so I have disabled it again. > > I am beginning to suspect broadcast storm traffic from each AP to the > switch and back out to the other AP's, but I'm not sure this is > correct. > Any suggestions? > > Shane Mitchell > The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
