I 4th that also,, But I found passing a small paper clip at the back of the plastic is OK until Smartbridges install some softer one.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Valentine Sent: Monday, November 17, 2003 11:16 AM To: [EMAIL PROTECTED] Subject: RE: [smartBridges] Powershot Indoor RJ45 Boot I third that (about ripped my thumbnail off trying to get one unplugged). -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stuart Pierce Sent: Monday, November 17, 2003 9:13 AM To: [EMAIL PROTECTED] Subject: Re: [smartBridges] Powershot Indoor RJ45 Boot I'll second that. That pains me to no end to try and get that out of a network card or router. ---------- Original Message ---------------------------------- From: "Colin Watson" <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] Date: Sun, 16 Nov 2003 16:13:37 -0000 >Hi, > > Is there any chance smartBridges could use a softer boot for the RJ45 connection on the powershot indoor unit? The rubber dimple on the top is hard as a rock and a nightmare to depress - It worrys me that customers may apply more then reasonable force to extract the conenction from an rj45 port - I've seen this. A softer one - or ideally just a socket I can plug my own RJ45 cable into would be even better. > >Thanks > >Colin. > > > --- [This E-mail scanned for viruses by Declude Virus By Avolve.net] The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
