Instead of using queues you can also use the customer's setup in the PPP secret area. That is, if you are using PPTP or PPPoE to authenticate clients. We've set up several profiles in the PPP screen and then assign each user "secret" entry to the appropriate profile.
It gets a little more complicated if you are using RADIUS for authentication and HotSpot isn't an easy one to specify speed either through RADIUS. But MikroTik stuff is great. Gotta love it. Kevin Summers KISTech Internet Services Inc. www.kistech.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of TJ Burbank Sent: Tuesday, November 18, 2003 7:03 PM To: [EMAIL PROTECTED] Subject: [smartBridges] MikroTik Bandwidth Queues Hello again, We recently got a MikroTik router setup on our network, and have loved it thus far. One thing we want to be able to do with it is obviously Bandwidth Throttling. I have read through the documentation about Queues and Data Rate Management. However I have not seen any information for throttling an individual alone without creating a global throttle rule for the interface (network segment). Is this possible? We are using masquerading (nat) and I have read the instructions indicating we need to us IP Mange for managing upload traffic. Please help me out in any way you can, TJ Burbank Last Mile Wireless The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
