If using different channels, polarity is totally up to you. Separation isn't much of an issue either. If using the same channel, go with the 10' of vertical separation and opposite polarity and you should be fine.
Kevin Summers KISTech Internet Services Inc. www.kistech.com -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of [EMAIL PROTECTED] Sent: Tuesday, November 25, 2003 11:21 AM To: [EMAIL PROTECTED] Subject: [smartBridges] antenna distance ACK!! Just got word from the fire department that they're installing their radio gear today and if I want to be up on their tower, I need to be out there in 3 hours. Any recommendations on antenna distance between backhaul and AP antenna? This relay tower will only service ~20 customers for now, so I'm going to use an airPoint associated to the one of the APs at the primary tower, run it into a switch and then into another airPoint. 18dB panel aimed at the tower, with a sectored (because I don't have an omni) aimed at the subdivision in question. My question... How far apart must/should the 2 antennas need to be? I'm hoping I can have them 10 vertical feet apart, with the backhaul on V and AP on H, but I don't know that I'll have that luxury. I need some *reliable* (no offense ;) answers quick. Thanks. Tim Foster www.AledoBroadBand.com Aledo's only high-speed ISP The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org The PART-15.ORG smartBridges Discussion List To Join: mailto:[EMAIL PROTECTED] (in the body type subscribe smartBridges <yournickname> To Remove: mailto:[EMAIL PROTECTED] (in the body type unsubscribe smartBridges) Archives: http://archives.part-15.org
