Title: Message
| ï
Okay woke up this morning after not resetting any
thing and I have way more errors on the SB product since switching to the CISCO
HOW CAN THAT BE???? It seems these units have an issue with the LAN maybe I can
revert back to some firmware from way way way back to see if this
helps? anyone running old firmware of so
what version and what results have you had??
Thanks
----- Original Message -----
Sent: Wednesday, November 26, 2003 5:04
PM
Subject: Re: [smartBridges] Bandwidth
issues still
Yes I have played around with them many times I
think the best was about 256 CTS and 1024 Fragmentation I just now changed
everything back to 2346 on both as a test. After further checking on the Cicso
switch it to shows some errors on the ports the APPO's are connected to. On
the Port that the Canopy is on it shows 0 errors...
If you want to take a look at the Cisco switch
its on a public IP contact me off line and I will give you the password and IP
info if you want I can also try and figure out how to give you vpn access to
the radios as well..
----- Original Message -----
Sent: Wednesday, November 26, 2003 4:56
PM
Subject: Re: [smartBridges] Bandwidth
issues still
Ok, I've skipped a bunch of emails so forgive me if I ask you
this: have you configured the RTS/CTS settings? What are they
at?
Sevak
On Wed, 2003-11-26 at 19:07, Blazen Wireless wrote:
Okay today we went
to the tower and put in a Cisco switch forcing the APPOs to 10 meg 1.2
duplex. I still see errors on the SB units in fact MORE collisions then
before and MORE SingleDefer Packets?
I am at a loss any
other ideas? the Cisco reports ZERO errors on the LAN side to either APPO
or the Canopy unit..
|
