First sorry for the long message but I included both drives information since
they both had boot messages from smartd.
rpm -qa |grep smartmontools
smartmontools-5.38.0.20080523-5.1
The following is from the change log for the above version.
[CF] Drive database: Added Fujitsu MHW2 BH, Maxtor DiamondMax 17, 20, 21,
Hitachi Travelstar 4K40, 5K120, 7K200, Deskstar 7K160, T7K500,
T7K1000, Toshiba 1.8", Seagate Momentus 5400.3, 5400.3 ED, 7200.2,
Barracuda 7200.11 and ES.
Updated Toshiba 2.5", Seagate Barracuda 7200.9 and 7200.10.
Added missing "(Hitachi )?" to Travelstar entries.
Purchased 8/3/2007 [Both Drives]
Note: According to the Maxtor boxes the disks came in they are DiamondMax
21's.
Buffer size: 16MB
Typ. Seek Time 8.5ms
Ext transfer rate: 3.0GB/sec (SATA/3.0GB)
linux:/home/finemanruss # smartctl -t short /dev/sda
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in
off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Mon Aug 18 15:06:59 2008
Use smartctl -X to abort test.
linux:/home/finemanruss # smartctl -a /dev/sda
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3320620AS
Serial Number: 3QF0THZW
Firmware Version: 3.AAE
User Capacity: 320,072,933,376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Aug 18 15:09:38 2008 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 092 006 Pre-fail
Always - 230495392
3 Spin_Up_Time 0x0003 098 095 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 725
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 083 060 030 Pre-fail
Always - 228499505
9 Power_On_Hours 0x0032 096 096 000 Old_age
Always - 4206
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age
Always - 1161
187 Reported_Uncorrect 0x0032 076 076 000 Old_age
Always - 24
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 059 049 045 Old_age
Always - 41 (Lifetime Min/Max 40/41)
194 Temperature_Celsius 0x0022 041 051 000 Old_age
Always - 41 (0 24 0 0)
195 Hardware_ECC_Recovered 0x001a 076 056 000 Old_age
Always - 38404291
197 Current_Pending_Sector 0x0012 100 001 000 Old_age
Always - 0
198 Offline_Uncorrectable 0x0010 100 001 000 Old_age
Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
ATA Error Count: 159 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 159 occurred at disk power-on lifetime: 4158 hours (173 days + 6 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6b 3b 75 e9 Error: UNC at LBA = 0x09753b6b = 158677867
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 5e 3b 75 e9 00 00:06:11.305 READ DMA
27 00 00 00 00 00 e0 00 00:06:11.297 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:06:10.854 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:06:08.910 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:06:08.858 READ NATIVE MAX ADDRESS EXT
Error 158 occurred at disk power-on lifetime: 4158 hours (173 days + 6 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6b 3b 75 e9 Error: UNC at LBA = 0x09753b6b = 158677867
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 5e 3b 75 e9 00 00:06:06.239 READ DMA
27 00 00 00 00 00 e0 00 00:06:05.801 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:06:03.854 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:06:08.910 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:06:08.858 READ NATIVE MAX ADDRESS EXT
Error 157 occurred at disk power-on lifetime: 4158 hours (173 days + 6 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6b 3b 75 e9 Error: UNC at LBA = 0x09753b6b = 158677867
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 5e 3b 75 e9 00 00:06:06.239 READ DMA
27 00 00 00 00 00 e0 00 00:06:05.801 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:06:03.854 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:06:03.800 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:06:03.792 READ NATIVE MAX ADDRESS EXT
Error 156 occurred at disk power-on lifetime: 4158 hours (173 days + 6 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6b 3b 75 e9 Error: UNC at LBA = 0x09753b6b = 158677867
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 5e 3b 75 e9 00 00:06:00.755 READ DMA
27 00 00 00 00 00 e0 00 00:05:58.822 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:06:03.854 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:06:03.800 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:06:03.792 READ NATIVE MAX ADDRESS EXT
Error 155 occurred at disk power-on lifetime: 4158 hours (173 days + 6 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 6b 3b 75 e9 Error: UNC at LBA = 0x09753b6b = 158677867
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 28 5e 3b 75 e9 00 00:06:00.755 READ DMA
27 00 00 00 00 00 e0 00 00:05:58.822 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:05:58.817 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:05:58.811 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:05:58.794 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 4206 -
# 2 Short offline Completed without error 00% 3822 -
# 3 Short offline Completed without error 00% 3822 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
linux:~ # smartctl -t short /dev/sdb
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Short self-test routine immediately in
off-line mode".
Drive command "Execute SMART Short self-test routine immediately in off-line
mode" successful.
Testing has begun.
Please wait 1 minutes for test to complete.
Test will complete after Mon Aug 18 15:42:26 2008
Use smartctl -X to abort test.
linux:~ # smartctl -a /dev/sdb
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: MAXTOR STM3320620AS
Serial Number: 3QF0W3PK
Firmware Version: 3.AAE
User Capacity: 320,072,933,376 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Aug 18 15:44:33 2008 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 41) The self-test routine was interrupted
by the host with a hard or soft reset.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 115) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 088 006 Pre-fail
Always - 203616874
3 Spin_Up_Time 0x0003 098 095 000 Pre-fail
Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age
Always - 595
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail
Always - 0
7 Seek_Error_Rate 0x000f 079 060 030 Pre-fail
Always - 86105732
9 Power_On_Hours 0x0032 098 098 000 Old_age
Always - 2132
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
Always - 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age
Always - 1209
187 Reported_Uncorrect 0x0032 058 058 000 Old_age
Always - 42
189 High_Fly_Writes 0x003a 100 100 000 Old_age
Always - 0
190 Airflow_Temperature_Cel 0x0022 060 049 045 Old_age
Always - 40 (Lifetime Min/Max 40/40)
194 Temperature_Celsius 0x0022 040 051 000 Old_age
Always - 40 (0 23 0 0)
195 Hardware_ECC_Recovered 0x001a 098 051 000 Old_age
Always - 203170234
197 Current_Pending_Sector 0x0012 100 100 000 Old_age
Always - 3
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
Offline - 3
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age
Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age
Always - 0
SMART Error Log Version: 1
ATA Error Count: 120 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 120 occurred at disk power-on lifetime: 820 hours (34 days + 4 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bf c4 80 ed Error: UNC at LBA = 0x0d80c4bf = 226542783
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf c4 80 ed 00 00:11:48.534 READ DMA
27 00 00 00 00 00 e0 00 00:11:48.526 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:11:48.466 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:11:48.458 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:11:48.018 READ NATIVE MAX ADDRESS EXT
Error 119 occurred at disk power-on lifetime: 820 hours (34 days + 4 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bf c4 80 ed Error: UNC at LBA = 0x0d80c4bf = 226542783
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf c4 80 ed 00 00:11:48.534 READ DMA
27 00 00 00 00 00 e0 00 00:11:48.526 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:11:48.466 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:11:48.458 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:11:48.018 READ NATIVE MAX ADDRESS EXT
Error 118 occurred at disk power-on lifetime: 820 hours (34 days + 4 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bf c4 80 ed Error: UNC at LBA = 0x0d80c4bf = 226542783
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf c4 80 ed 00 00:11:43.503 READ DMA
27 00 00 00 00 00 e0 00 00:11:43.434 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:11:43.426 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:11:42.993 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:11:41.050 READ NATIVE MAX ADDRESS EXT
Error 117 occurred at disk power-on lifetime: 820 hours (34 days + 4 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bf c4 80 ed Error: UNC at LBA = 0x0d80c4bf = 226542783
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf c4 80 ed 00 00:11:43.503 READ DMA
27 00 00 00 00 00 e0 00 00:11:43.434 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:11:43.426 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:11:42.993 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:11:41.050 READ NATIVE MAX ADDRESS EXT
Error 116 occurred at disk power-on lifetime: 820 hours (34 days + 4 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 bf c4 80 ed Error: UNC at LBA = 0x0d80c4bf = 226542783
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 bf c4 80 ed 00 00:11:38.532 READ DMA
27 00 00 00 00 00 e0 00 00:11:38.532 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 00:11:38.529 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 00:11:38.528 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:11:41.050 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Interrupted (host reset) 90% 2132 -
# 2 Short offline Completed without error 00% 1734 -
# 3 Extended offline Completed: read failure 90% 836
226542783
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
I have submitted these and they appear to be in release 5.38 according to the
change log. So why is the status information telling me they are not in the
database? Is there a way to get an updated database? I am having a system
problem that appears to be rereads of the disk or a hang of a disk.
--
Russ
Linux register user 441463
-------------------------------------------------------------------------
This SF.Net email is sponsored by the Moblin Your Move Developer's challenge
Build the coolest Linux based applications with Moblin SDK & win great prizes
Grand prize is a trip for two to an Open Source event anywhere in the world
http://moblin-contest.org/redirect.php?banner_id=100&url=/
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
