Hi, please find attached the output of "smartctl -a" and complete spec from WD website for "WDC WD5000ABPS-01ZZB0". This harddrive seems not to be in the smartctl database as of version 5.38-1ubuntu2
Cheers, Jakub Šafář / http://jakubsafar.cz WDC WD5000ABPS-01ZZB0 is: WESTERN DIGITAL Caviar RE2-GP 500GB Short info: SATA II, 16MB cache, IntelliPower, PMR, 8.9ms, Long info taken from: http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_faqid=2512 Specifications for the 500 GB Second Generation RE2 Green Power Serial ATA drive (WD500ABPS). Physical Specifications Model Number WD5000ABPS Formatted Capacity 1 500,107 MB Used Sectors Per Drive 976,773,168 Interface 300 MB/s Serial ATA 2.0 (backwards compatible with Serial ATA 1.0) Bytes Per Sector 512 Dedicated Landing Zone Yes Actuator Latch/Auto Park Yes sata drive connectors Performance Specifications Data Transfer Rate (maximum) - Buffer to Host 300 MB/s max2 Average Read Seek 8.9 ms (average) Track-to-track Seek3 .60 ms (average) Rotational Speed 5400-7200 RPM Read Cache Adaptive Write Cache Yes Buffer 16 MB Drive Ready Time 17.0 sec average Load/Unload Cycles 600,000 min Error Rate (non-recoverable) <1 in 1014 bits read LBA support Yes 2Maximum burst rate running the specified PIO, DMA, Ultra ATA, or Serial ATA transfer mode. 3 On reads and writes. Physical Dimensions Height 1.028 in. (25.4 mm) max Length 5.787 in. (147.0 mm) max Width 4.0 in. (101.6 mm) ± .01 in. Weight 1.39 lb. (0.60 kg) ± 10% Power Requirements4 Mode 12 V (± 10%) 5 V (± 5%) Power Read/Write4 220 mA 700 mA 6.0 W Idle 180 mA 220 mA 3.3 W Standby 6 mA 180 mA .97 W Sleep 6 mA 180 mA .97 W Spinup 875 mA(max) 420 mA 10.0 W 420% duty cycle. Environmental Specifications5 Shock Operating (2ms) 65G Non-operating (2ms) 250G Half sine wave measured in 2 ms duration, measured without isolation. Vibration Operating - Random 0.004 g2/Hz (10 to 300 Hz) - Linear 20-300 Hz, 0.75G (0 to peak) Non-operating - Linear 5-20 Hz, 0.195 inches (dbl amp) 20-500 Hz, 4G (0 to peak) Operating Temperature and Humidity Temperature 5°C to 55°C (41°F to 131°F) Humidity 5-95% RH non-condensing Thermal Gradient 20°C/hour (maximum) Non-Operating Temperature and Humidity Temperature -40°C to 65°C (-40°F to 149°F) Humidity 5-95% RH non-condensing Thermal Gradient 30°C/hour (maximum) Acoustics (average) Idle Mode6 24 dBA Seek Mode 06 29 dBA Seek Mode 36 25 dBA Warranty Period Warranty Length 5No non-recoverable errors during operating tests or after non-operating tests. # smartctl -a /dev/sda smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD5000ABPS-01ZZB0 Serial Number: WD-WCASU5946144 Firmware Version: 02.01B01 User Capacity: 500,107,862,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Jan 18 12:42:29 2009 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (13980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 163) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0003 165 165 021 Pre-fail Always - 4733 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 23 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x000e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 238 10 Spin_Retry_Count 0x0012 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 23 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 5 193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12596 194 Temperature_Celsius 0x0022 114 111 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. -- http://jakubsafar.cz ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
