A new HD for the database. Seems to work without any -v options.
HTH
Sebastian
--
" Religion ist das Opium des Volkes. " Karl Marx
s...@sti@N GÜNTHER mailto:sam...@guenther-roetgen.de
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: HITACHI HTS541680J9SA00
Serial Number: SB2241KGC4UNKE
Firmware Version: SB2IC7JP
User Capacity: 80.026.361.856 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 1
Local Time is: Tue Jan 20 01:01:24 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 645) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 44) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 062 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 107 107 040 Pre-fail Offline
- 4500
3 Spin_Up_Time 0x0007 253 253 033 Pre-fail Always
- 0
4 Start_Stop_Count 0x0012 099 099 000 Old_age Always
- 1859
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0005 128 128 040 Pre-fail Offline
- 36
9 Power_On_Hours 0x0012 085 085 000 Old_age Always
- 6731
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 1493
191 G-Sense_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 42
193 Load_Cycle_Count 0x0012 051 051 000 Old_age Always
- 490134
194 Temperature_Celsius 0x0002 157 157 000 Old_age Always
- 35 (Lifetime Min/Max 11/48)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always
- 0
223 Load_Retry_Count 0x000a 100 100 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 1f 1c 51 e0 Error: IDNF 1 sectors at LBA = 0x00511c1f = 5315615
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 01 1f 1c 51 e0 00 00:06:04.300 READ DMA EXT
34 ff 01 00 00 00 e0 00 00:06:04.200 WRITE SECTORS(S) EXT
25 ff 01 00 00 00 e0 00 00:06:04.200 READ DMA EXT
25 ff 01 10 3b 00 e0 00 00:06:04.200 READ DMA EXT
25 ff 01 3f 00 00 e0 00 00:06:04.200 READ DMA EXT
Error 3 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 1f 1c 51 e0 Error: IDNF 1 sectors at LBA = 0x00511c1f = 5315615
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 01 1f 1c 51 e0 00 00:06:04.200 READ DMA EXT
34 ff 01 00 00 00 e0 00 00:06:04.100 WRITE SECTORS(S) EXT
35 ff 01 1f 3b 00 e0 00 00:06:04.100 WRITE DMA EXT
35 ff 01 1e 3b 00 e0 00 00:06:04.100 WRITE DMA EXT
35 ff 01 1d 3b 00 e0 00 00:06:04.100 WRITE DMA EXT
Error 2 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 1f 1c 51 e0 Error: IDNF 1 sectors at LBA = 0x00511c1f = 5315615
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 01 1f 1c 51 e0 00 00:06:04.000 READ DMA EXT
34 ff 01 00 00 00 e0 00 00:06:03.900 WRITE SECTORS(S) EXT
35 ff 01 4e 00 00 e0 00 00:06:03.900 WRITE DMA EXT
35 ff 01 4d 00 00 e0 00 00:06:03.900 WRITE DMA EXT
35 ff 01 4c 00 00 e0 00 00:06:03.900 WRITE DMA EXT
Error 1 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
10 51 01 1f 1c 51 e0 Error: IDNF 1 sectors at LBA = 0x00511c1f = 5315615
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 ff 01 1f 1c 51 e0 00 00:06:03.500 READ DMA EXT
c8 ff 01 00 00 00 e0 00 00:04:13.100 READ DMA
c8 ff 01 00 00 00 e0 00 00:04:13.100 READ DMA
c8 ff 01 00 00 00 e0 00 00:04:13.100 READ DMA
f5 ff 00 00 00 00 a0 00 00:04:11.300 SECURITY FREEZE LOCK
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 6731 -
# 2 Extended offline Completed without error 00% 3848 -
# 3 Extended offline Completed without error 00% 3671 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
