Running 5.30 on Gentoo Linux on a ThinkPad X40. This is the second hard
drive for this laptop. The output of smartctl -a /dev/hda is attached.

--Daniel Arvesen
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     HTC426060G8CE00
Serial Number:    L82LUZ
Firmware Version: 00P7A0B1
User Capacity:    60,011,642,880 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Thu Jan 29 22:01:06 2009 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 (3230) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  55) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000d   100   100   050    Pre-fail  Offline      
-       4294967297
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      
-       22990
  3 Spin_Up_Time            0x0006   100   100   000    Old_age   Always       
-       0
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       27
  5 Reallocated_Sector_Ct   0x0033   100   100   010    Pre-fail  Always       
-       1
  7 Seek_Error_Rate         0x000f   100   100   050    Pre-fail  Always       
-       581
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      
-       1210
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       6880537611760
 10 Spin_Retry_Count        0x0013   100   100   050    Pre-fail  Always       
-       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       23
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       
-       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       
-       0
193 Load_Cycle_Count        0x0032   100   100   000    Old_age   Always       
-       25501369841
194 Temperature_Celsius     0x0022   100   094   000    Old_age   Always       
-       33 (Lifetime Min/Max 17/40)
195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       
-       0
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       
-       1
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       
-       0
200 Multi_Zone_Error_Rate   0x0013   100   100   050    Pre-fail  Always       
-       0
201 Soft_Read_Error_Rate    0x0012   100   100   000    Old_age   Always       
-       0
223 Load_Retry_Count        0x0012   100   100   000    Old_age   Always       
-       0
230 Head_Amplitude          0x0032   100   100   000    Old_age   Always       
-       11536282160449
250 Read_Error_Retry_Rate   0x000a   100   100   000    Old_age   Always       
-       288

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%        59         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to