see attachment.
smartctl version 5.38 [x86_64-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST3750330NS
Serial Number: 9QK1NZ43
Firmware Version: SN05
User Capacity: 750,156,374,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Nov 4 22:35:05 2009 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 247) Self-test routine in progress...
70% of test remaining.
Total time to complete Offline
data collection: ( 642) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 180) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 043 043 044 Pre-fail Always
FAILING_NOW 4970088
3 Spin_Up_Time 0x0003 099 099 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always
- 86
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always
- 122318174
9 Power_On_Hours 0x0032 092 092 000 Old_age Always
- 7762
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 037 020 Old_age Always
- 86
184 Unknown_Attribute 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 077 077 000 Old_age Always
- 23
188 Unknown_Attribute 0x0032 100 088 000 Old_age Always
- 54
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 070 056 045 Old_age Always
- 30 (Lifetime Min/Max 28/30)
194 Temperature_Celsius 0x0022 030 044 000 Old_age Always
- 30 (0 19 0 0)
195 Hardware_ECC_Recovered 0x001a 023 022 000 Old_age Always
- 4970088
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
SMART Error Log Version: 1
ATA Error Count: 23 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 23 occurred at disk power-on lifetime: 7137 hours (297 days + 9 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 40 bd 81 00 Error: UNC at LBA = 0x0081bd40 = 8502592
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 10 31 bd 81 e0 00 4d+19:42:35.857 READ DMA
c8 00 18 c9 a8 75 ec 00 4d+19:42:35.849 READ DMA
ca 00 20 d1 a3 ce e0 00 4d+19:42:35.846 WRITE DMA
ea 00 00 ff ff ff af 00 4d+19:42:35.819 FLUSH CACHE EXIT
ca 00 08 49 3c 8f ee 00 4d+19:42:35.819 WRITE DMA
Error 22 occurred at disk power-on lifetime: 5184 hours (216 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cc f6 c7 07 Error: UNC at LBA = 0x07c7f6cc = 130545356
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 c9 f6 c7 e7 00 10:35:32.743 READ DMA
27 00 00 00 00 00 e0 00 10:35:32.742 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 10:35:32.718 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 10:35:32.709 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 10:35:32.690 READ NATIVE MAX ADDRESS EXT
Error 21 occurred at disk power-on lifetime: 5184 hours (216 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cc f6 c7 07 Error: UNC at LBA = 0x07c7f6cc = 130545356
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 c9 f6 c7 e7 00 10:35:29.683 READ DMA
27 00 00 00 00 00 e0 00 10:35:29.682 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 10:35:29.658 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 10:35:29.652 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 10:35:29.634 READ NATIVE MAX ADDRESS EXT
Error 20 occurred at disk power-on lifetime: 5184 hours (216 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cc f6 c7 07 Error: UNC at LBA = 0x07c7f6cc = 130545356
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 c9 f6 c7 e7 00 10:35:26.604 READ DMA
27 00 00 00 00 00 e0 00 10:35:26.602 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 10:35:26.578 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 10:35:26.499 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 10:35:26.498 READ NATIVE MAX ADDRESS EXT
Error 19 occurred at disk power-on lifetime: 5184 hours (216 days + 0 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 cc f6 c7 07 Error: UNC at LBA = 0x07c7f6cc = 130545356
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 c9 f6 c7 e7 00 10:35:23.580 READ DMA
27 00 00 00 00 00 e0 00 10:35:23.578 READ NATIVE MAX ADDRESS EXT
ec 00 00 00 00 00 a0 02 10:35:23.554 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 02 10:35:23.546 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 10:35:23.530 READ NATIVE MAX ADDRESS EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Self-test routine in progress 70% 7762 -
# 2 Short offline Interrupted (host reset) 00% 7742 -
# 3 Short offline Interrupted (host reset) 00% 7694 -
# 4 Extended offline Completed: read failure 90% 7646
8521314
# 5 Short offline Completed without error 00% 7572 -
# 6 Short offline Interrupted (host reset) 00% 7524 -
# 7 Extended offline Completed without error 00% 7479 -
# 8 Short offline Interrupted (host reset) 00% 7403 -
# 9 Short offline Completed without error 00% 7355 -
#10 Extended offline Interrupted (host reset) 00% 7311 -
#11 Short offline Interrupted (host reset) 00% 7235 -
#12 Short offline Completed without error 00% 7189 -
#13 Extended offline Completed without error 00% 7153 -
#14 Extended offline Completed without error 00% 7146 -
#15 Short offline Completed without error 00% 7069 -
#16 Short offline Interrupted (host reset) 00% 7021 -
#17 Extended offline Completed without error 00% 6977 -
#18 Short offline Completed without error 00% 6901 -
#19 Short offline Completed without error 00% 6853 -
#20 Extended offline Interrupted (host reset) 00% 6805 -
#21 Short offline Completed without error 00% 6733 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
