smartctl 5.40 2010-09-01 r3144 [x86_64-unknown-linux-gnu] (local build)

Copyright (C) 2002-10 by Bruce Allen,
http://smartmontools.sourceforge.net

 

=== START OF INFORMATION SECTION ===

Device Model:     UGB88PGC100HF2

Serial Number:    UNIGEN-436896-000008

Firmware Version: MP Rev2

User Capacity:    100,030,242,816 bytes

Device is:        Not in smartctl database [for details use: -P showall]

ATA Version is:   8

ATA Standard is:  ATA-8-ACS revision 6

Local Time is:    Tue Sep  7 15:59:10 2010 PDT

SMART support is: Available - device has SMART capability.

SMART support is: Enabled

 

=== START OF READ SMART DATA SECTION ===

SMART overall-health self-assessment test result: PASSED

 

General SMART Values:

Offline data collection status:  (0x00) Offline data collection activity

                                        was never started.

                                        Auto Offline Data Collection:
Disabled.

Self-test execution status:      (   0) The previous self-test routine
completed

                                        without error or no self-test
has ever

                                        been run.

Total time to complete Offline

data collection:                 (   0) seconds.

Offline data collection

capabilities:                    (0x7f) SMART execute Offline immediate.

                                        Auto Offline data collection
on/off support.

                                        Abort Offline collection upon
new

                                        command.

                                        Offline surface scan supported.

                                        Self-test supported.

                                        Conveyance Self-test supported.

                                        Selective Self-test supported.

SMART capabilities:            (0x0003) Saves SMART data before entering

                                        power-saving mode.

                                        Supports SMART auto save timer.

Error logging capability:        (0x01) Error logging supported.

                                        General Purpose Logging
supported.

Short self-test routine

recommended polling time:        (   1) minutes.

Extended self-test routine

recommended polling time:        (  48) minutes.

Conveyance self-test routine

recommended polling time:        (   2) minutes.

SCT capabilities:              (0x003d) SCT Status supported.

                                        SCT Error Recovery Control
supported.

                                        SCT Feature Control supported.

                                        SCT Data Table supported.

 

SMART Attributes Data Structure revision number: 10

Vendor Specific SMART Attributes with Thresholds:

ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE

  1 Raw_Read_Error_Rate     0x000f   112   112   050    Pre-fail  Always
-       69126799

  5 Reallocated_Sector_Ct   0x0033   093   093   003    Pre-fail  Always
-       2688

  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always
-       107734959652960

 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always
-       9

171 Unknown_Attribute       0x0000   000   000   000    Old_age
Offline      -       0

172 Unknown_Attribute       0x0000   000   000   000    Old_age
Offline      -       0

174 Unknown_Attribute       0x0030   000   000   000    Old_age
Offline      -       7

177 Wear_Leveling_Count     0x0000   000   000   ---    Old_age
Offline      -       0

181 Program_Fail_Cnt_Total  0x0000   000   000   000    Old_age
Offline      -       0

182 Erase_Fail_Count_Total  0x0000   000   000   000    Old_age
Offline      -       0

187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always
-       0

194 Temperature_Celsius     0x0022   025   029   000    Old_age   Always
-       25 (Lifetime Min/Max 0/29)

195 Hardware_ECC_Recovered  0x001c   112   112   000    Old_age
Offline      -       69126799

196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always
-       0

231 Temperature_Celsius     0x0013   091   091   010    Pre-fail  Always
-       1

233 Media_Wearout_Indicator 0x0000   000   000   000    Old_age
Offline      -       0

234 Unknown_Attribute       0x0000   000   000   000    Old_age
Offline      -       0

241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always
-       0

242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always
-       0

 

Error SMART Error Log Read failed: Input/output error

Smartctl: SMART Error Log Read Failed

Error SMART Error Self-Test Log Read failed: Input/output error

Smartctl: SMART Self Test Log Read Failed

SMART Selective self-test log data structure revision number 1

 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS

    1        0        0  Not_testing

    2        0        0  Not_testing

    3        0        0  Not_testing

    4        0        0  Not_testing

    5        0        0  Not_testing

Selective self-test flags (0x0):

  After scanning selected spans, do NOT read-scan remainder of disk.

If Selective self-test is pending on power-up, resume after 0 minute
delay.

------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:

Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to