Hello,
attached is smartctl -T permissive -a output (following smartctl -T permissive
-t short) for a Transcend 133X 4GB CompactFlash Card, attached to a CF-IDE
adapter.
Curiously, I did a few smartctl runs on this card, and sometimes needed to
pass -s on; it seemed to disable SMART support between these runs a couple of
times.
smartctl 5.40 2010-09-14 r3150 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: TRANSCEND
Serial Number: 20090714 CF1334C2
Firmware Version: 20080820
User Capacity: 4,009,549,824 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 4
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Sep 16 00:52:47 2010 EEST
SMART support is: Ambiguous - ATA IDENTIFY DEVICE words 85-87 don't show if
SMART is enabled.
Checking to be sure by trying SMART RETURN STATUS command.
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Total time to complete Offline
data collection: ( 1) seconds.
Offline data collection
capabilities: (0x00) Offline data collection not
supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x00) Error logging NOT supported.
No General Purpose Logging support.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline
- 0
2 Throughput_Performance 0x0000 100 100 000 Old_age Offline
- 0
5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline
- 0
7 Seek_Error_Rate 0x0000 100 100 000 Old_age Offline
- 0
8 Seek_Time_Performance 0x0000 100 100 000 Old_age Offline
- 0
12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline
- 680
195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline
- 0
196 Reallocated_Event_Count 0x0000 100 100 000 Old_age Offline
- 0
197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline
- 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0000 100 100 000 Old_age Offline
- 0
200 Multi_Zone_Error_Rate 0x0000 100 100 000 Old_age Offline
- 0
Warning: device does not support Error Logging
Error SMART Error Log Read failed: Input/output error
Smartctl: SMART Error Log Read Failed
Warning: device does not support Self Test Logging
Error SMART Error Self-Test Log Read failed: Input/output error
Smartctl: SMART Self Test Log Read Failed
Device does not support Selective Self Tests/Logging
------------------------------------------------------------------------------
Start uncovering the many advantages of virtual appliances
and start using them to simplify application deployment and
accelerate your shift to cloud computing.
http://p.sf.net/sfu/novell-sfdev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
