Dear smartmontools developers! Many thanks for this great software, I tested a USB device successfully, which is not yet in the database. The information about the system, device and tests is as follows:
> Linux perle 2.6.35-22-generic #35-Ubuntu SMP Sat Oct 16 20:45:36 UTC 2010 > x86_64 GNU/Linux > Bus 002 Device 004: ID 04e8:1f08 Samsung Electronics Co., Ltd > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x04e8 Samsung Electronics Co., Ltd > idProduct 0x1f08 > bcdDevice 0.00 > iManufacturer 1 JMicron > iProduct 11 Samsung S2 Portable > iSerial 3 00000011E093105007D1 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 32 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 4 USB Mass Storage > bmAttributes 0xc0 > Self Powered > MaxPower 2mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 2 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk (Zip) > iInterface 6 MSC Bulk-Only Transfer > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x02 EP 2 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type None > Usage Type Data > wMaxPacketSize 0x0200 1x 512 bytes > bInterval 0 > Device Qualifier (for other device speed): > bLength 10 > bDescriptorType 6 > bcdUSB 2.00 > bDeviceClass 0 (Defined at Interface level) > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > bNumConfigurations 1 > can't get debug descriptor: Connection timed out > Device Status: 0x5301 > Self Powered > > --- dmesg ---- > [ 134.240122] usb 2-6: new high speed USB device using ehci_hcd and address 4 > [ 134.394003] scsi8 : usb-storage 2-6:1.0 > [ 135.406138] scsi 8:0:0:0: Direct-Access Samsung S2 Portable > PQ: 0 ANSI: 2 CCS > [ 135.408068] sd 8:0:0:0: Attached scsi generic sg6 type 0 > [ 135.413346] sd 8:0:0:0: [sdf] 1953525168 512-byte logical blocks: (1.00 > TB/931 GiB) > [ 135.414237] sd 8:0:0:0: [sdf] Write Protect is off > [ 135.414245] sd 8:0:0:0: [sdf] Mode Sense: 3c 00 00 00 > [ 135.414251] sd 8:0:0:0: [sdf] Assuming drive cache: write through > [ 135.417142] sd 8:0:0:0: [sdf] Assuming drive cache: write through > [ 135.417157] sdf: sdf1 sdf2 > [ 135.444989] sd 8:0:0:0: [sdf] Assuming drive cache: write through > [ 135.445002] sd 8:0:0:0: [sdf] Attached SCSI disk > > --- tests --- > r...@perle:~# smartctl -t short /dev/sdf -d usbjmicron -T conservative > smartctl 5.40 2010-03-16 r3077 [x86_64-unknown-linux-gnu] (local build) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === > Sending command: "Execute SMART Short self-test routine immediately in > off-line mode". > Drive command "Execute SMART Short self-test routine immediately in off-line > mode" successful. > Testing has begun. > Please wait 2 minutes for test to complete. > Test will complete after Sat Nov 13 19:22:11 2010 > > Use smartctl -X to abort test. > r...@perle:~# smartctl -l selftest /dev/sdf -d usbjmicron > smartctl 5.40 2010-03-16 r3077 [x86_64-unknown-linux-gnu] (local build) > Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF READ SMART DATA SECTION === > SMART Self-test log structure revision number 1 > Num Test_Description Status Remaining LifeTime(hours) > LBA_of_first_error > # 1 Short offline Completed without error 00% 0 - Yours sincerly, Dipl.-Ing. Martin Weis
signature.asc
Description: OpenPGP digital signature
------------------------------------------------------------------------------ Centralized Desktop Delivery: Dell and VMware Reference Architecture Simplifying enterprise desktop deployment and management using Dell EqualLogic storage and VMware View: A highly scalable, end-to-end client virtualization framework. Read more! http://p.sf.net/sfu/dell-eql-dev2dev
_______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
