smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM100UI
Serial Number: S2GHJ9DZA01441
Firmware Version: 2AM10001
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sat Feb 12 20:38:44 2011 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health
self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: (14820) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 247) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART
Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 252 252 051 Pre-fail Always
- 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always
- 0
3 Spin_Up_Time 0x0023 080 080 025 Pre-fail Always
- 6281
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 5
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always
- 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline
- 0
9 Power_On_Hours 0x0032 252 252 000 Old_age Always
- 0
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always
- 1
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 11
181 Program_Fail_Cnt_Total 0x0022 252 252 --- Old_age Always
- 0
181 Program_Fail_Cnt_Total <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
191 G-Sense_Error_Rate <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
191 G-Sense_Error_Rate 0x0022 100 100 --- Old_age Always
- 1
191 G-Sense_Error_Rate <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
192 Power-Off_Retract_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
192 Power-Off_Retract_Count 0x0022 252 252 --- Old_age Always
- 0
192 Power-Off_Retract_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
194 Temperature_Celsius 0x0002 064 064 --- Old_age Always
- 29 (Lifetime Min/Max 28/29)
194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
195 Hardware_ECC_Recovered <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
195 Hardware_ECC_Recovered 0x003a 252 252 --- Old_age Always
- 0
195 Hardware_ECC_Recovered <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
196 Reallocated_Event_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
196 Reallocated_Event_Count 0x0032 252 252 --- Old_age Always
- 0
196 Reallocated_Event_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
197 Current_Pending_Sector <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
197 Current_Pending_Sector 0x0032 252 252 --- Old_age Always
- 0
197 Current_Pending_Sector <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
198 Offline_Uncorrectable <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
198 Offline_Uncorrectable 0x0030 252 252 --- Old_age Offline
- 0
198 Offline_Uncorrectable <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
199 UDMA_CRC_Error_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
199 UDMA_CRC_Error_Count 0x0036 200 200 --- Old_age Always
- 0
199 UDMA_CRC_Error_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
200 Multi_Zone_Error_Rate <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
200 Multi_Zone_Error_Rate 0x002a 252 252 --- Old_age Always
- 0
200 Multi_Zone_Error_Rate <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
223 Load_Retry_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
223 Load_Retry_Count 0x0032 100 100 --- Old_age Always
- 1
223 Load_Retry_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
225 Load_Cycle_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
225 Load_Cycle_Count 0x0032 100 100 --- Old_age Always
- 20
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1 No self-tests have been
logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run SMART Selective self-test log data
structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
============================================================================
==
== S.M.A.R.T Final Report for /dev/sda
==
Disk: /dev/sda
smartctl 5.39.1 2010-01-28 r3054 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM100UI
Serial Number: S2GHJ9DZA01441
Firmware Version: 2AM10001
User Capacity: 1,000,204,886,016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Sun Feb 13 14:10:09 2011 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION === SMART overall-health
self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection:
Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has
ever
been run.
Total time to complete Offline
data collection: (14820) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 247) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16 Vendor Specific SMART
Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always
- 1
2 Throughput_Performance 0x0026 252 252 000 Old_age Always
- 0
3 Spin_Up_Time 0x0023 080 080 025 Pre-fail Always
- 6281
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 5
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always
- 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 17
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always
- 1
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 11
181 Program_Fail_Cnt_Total 0x0022 252 252 --- Old_age Always
- 0
181 Program_Fail_Cnt_Total <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
191 G-Sense_Error_Rate <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
191 G-Sense_Error_Rate 0x0022 100 100 --- Old_age Always
- 1
191 G-Sense_Error_Rate <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
192 Power-Off_Retract_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
192 Power-Off_Retract_Count 0x0022 252 252 --- Old_age Always
- 0
192 Power-Off_Retract_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
194 Temperature_Celsius <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
194 Temperature_Celsius 0x0002 064 064 --- Old_age Always
- 29 (Lifetime Min/Max 27/36)
194 Temperature_Celsius <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
195 Hardware_ECC_Recovered <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
195 Hardware_ECC_Recovered 0x003a 100 100 --- Old_age Always
- 0
195 Hardware_ECC_Recovered <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
196 Reallocated_Event_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
196 Reallocated_Event_Count 0x0032 252 252 --- Old_age Always
- 0
196 Reallocated_Event_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
197 Current_Pending_Sector <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
197 Current_Pending_Sector 0x0032 252 252 --- Old_age Always
- 0
197 Current_Pending_Sector <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
198 Offline_Uncorrectable <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
198 Offline_Uncorrectable 0x0030 252 252 --- Old_age Offline
- 0
198 Offline_Uncorrectable <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
199 UDMA_CRC_Error_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
199 UDMA_CRC_Error_Count 0x0036 200 200 --- Old_age Always
- 0
199 UDMA_CRC_Error_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
200 Multi_Zone_Error_Rate <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
200 Multi_Zone_Error_Rate 0x002a 100 100 --- Old_age Always
- 0
200 Multi_Zone_Error_Rate <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
223 Load_Retry_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
223 Load_Retry_Count 0x0032 100 100 --- Old_age Always
- 1
223 Load_Retry_Count <== Data Page | WARNING: PREVIOUS
ATTRIBUTE HAS TWO
225 Load_Cycle_Count <== Threshold Page | INCONSISTENT IDENTITIES IN
THE DATA
225 Load_Cycle_Count 0x0032 100 100 --- Old_age Always
- 21
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1 No self-tests have been
logged. [To run self-tests, use: smartctl -t]
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run SMART Selective self-test log data
structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever
been run SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
==
============================================================================
------------------------------------------------------------------------------
The ultimate all-in-one performance toolkit: Intel(R) Parallel Studio XE:
Pinpoint memory and threading errors before they happen.
Find and fix more than 250 security defects in the development cycle.
Locate bottlenecks in serial and parallel code that limit performance.
http://p.sf.net/sfu/intel-dev2devfeb
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
