smartctl -a output attached
Please add to database
martctl 5.41 2011-06-09 r3365 [FreeBSD 8.2-RELEASE i386] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     QUANTUM FIREBALLlct15 07
Serial Number:    511028590484
Firmware Version: A01.0F00
User Capacity:    7 510 164 480 bytes [7,51 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   5
ATA Standard is:  ATA/ATAPI-5 T13 1321D revision 1
Local Time is:    Thu Aug  4 16:08:13 2011 YEKST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    2) seconds.
Offline data collection
capabilities:                    (0x1b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   8) minutes.

SMART Attributes Data Structure revision number: 11
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0029   100   253   020    Pre-fail  Offline      
-       0
  3 Spin_Up_Time            0x0027   082   081   020    Pre-fail  Always       
-       2291
  4 Start_Stop_Count        0x0032   098   098   008    Old_age   Always       
-       1586
  5 Reallocated_Sector_Ct   0x0033   100   100   020    Pre-fail  Always       
-       2
  7 Seek_Error_Rate         0x000b   100   100   023    Pre-fail  Always       
-       0
  9 Power_On_Hours          0x0012   089   089   001    Old_age   Always       
-       7524
 10 Spin_Retry_Count        0x0026   100   100   000    Old_age   Always       
-       0
 11 Calibration_Retry_Count 0x0013   100   100   020    Pre-fail  Always       
-       0
 12 Power_Cycle_Count       0x0032   098   098   008    Old_age   Always       
-       1573
 13 Read_Soft_Error_Rate    0x000b   100   093   023    Pre-fail  Always       
-       0
195 Hardware_ECC_Recovered  0x001a   100   039   000    Old_age   Always       
-       587146
196 Reallocated_Event_Count 0x0010   100   253   020    Old_age   Offline      
-       0
197 Current_Pending_Sector  0x0032   100   100   020    Old_age   Always       
-       0
198 Offline_Uncorrectable   0x0010   100   253   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x001a   200   200   000    Old_age   Always       
-       0

SMART Error Log Version: 0
No Errors Logged

SMART Self-test log structure revision number 0
Warning: ATA Specification requires self-test log structure revision number = 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging
------------------------------------------------------------------------------
BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA
The must-attend event for mobile developers. Connect with experts. 
Get tools for creating Super Apps. See the latest technologies.
Sessions, hands-on labs, demos & much more. Register early & save!
http://p.sf.net/sfu/rim-blackberry-1
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to