-- реклама -----------------------------------------------------------
Нужен отличный хостинг? 6 мес. хостинга бесплатно 
и домен в подарок. http://hvosting.ua/actions.html
# smartctl -a /dev/sdb
smartctl 5.41 2011-03-16 r3296 [x86_64-unknown-linux-gnu-2.6.38-2-amd64] (local 
build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     OCZ-REVODRIVE X2
Serial Number:    OCZ-IYV96M9ZF0BGD5PP
Firmware Version: 1.20
User Capacity:    120 034 123 776 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 6
Local Time is:    Sun Aug 21 23:49:52 2011 EEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x7f) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Abort Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (  48) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   118   100   050    Pre-fail  Always       
-       174162228
  5 Reallocated_Sector_Ct   0x0033   090   090   003    Pre-fail  Always       
-       1664
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       132388071937184
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       75
171 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline      
-       0
172 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline      
-       0
174 Unknown_Attribute       0x0030   000   000   000    Old_age   Offline      
-       58
177 Wear_Leveling_Count     0x0000   000   000   000    Old_age   Offline      
-       1
181 Program_Fail_Cnt_Total  0x0000   000   000   000    Old_age   Offline      
-       0
182 Erase_Fail_Count_Total  0x0000   000   000   000    Old_age   Offline      
-       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       
-       0
194 Temperature_Celsius     0x0022   099   129   000    Old_age   Always       
-       99 (0 127 0 129)
195 Hardware_ECC_Recovered  0x001c   118   100   000    Old_age   Offline      
-       174162228
196 Reallocated_Event_Count 0x0033   100   100   003    Pre-fail  Always       
-       0
231 Temperature_Celsius     0x0013   098   098   010    Pre-fail  Always       
-       0
233 Media_Wearout_Indicator 0x0000   000   000   000    Old_age   Offline      
-       24960
234 Unknown_Attribute       0x0000   000   000   000    Old_age   Offline      
-       576
241 Total_LBAs_Written      0x0032   000   000   000    Old_age   Always       
-       576
242 Total_LBAs_Read         0x0032   000   000   000    Old_age   Always       
-       618432

SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
Get a FREE DOWNLOAD! and learn more about uberSVN rich system, 
user administration capabilities and model configuration. Take 
the hassle out of deploying and managing Subversion and the 
tools developers use with it. http://p.sf.net/sfu/wandisco-d2d-2
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to