-- 
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!               
Jetzt informieren: http://www.gmx.net/de/go/freephone
smartctl 5.42 2011-10-11 r3440 [i586-linux-2.6.32-5-486] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     ST64022CF
Serial Number:    4NW07H1S
Firmware Version: 3.01
User Capacity:    4.095.737.856 bytes [4,09 GB]
Sector Sizes:     512 bytes logical, 1024 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   [No Information Found]
ATA Standard is:  [No Information Found]
Local Time is:    Fri Oct 14 21:37:49 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (  270) seconds.
Offline data collection
capabilities:                    (0x5b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  28) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   049   048   025    -    219110008
  3 Spin_Up_Time            PO----   100   100   000    -    0
  4 Start_Stop_Count        -O--CK   100   100   020    -    238
  5 Reallocated_Sector_Ct   PO--CK   100   100   036    -    0
  7 Seek_Error_Rate         POSR--   058   055   030    -    12887041924
  9 Power_On_Hours          -O--CK   100   100   000    -    235
 10 Spin_Retry_Count        -O--C-   100   100   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   020    -    157
191 G-Sense_Error_Rate      -O--CK   100   100   000    -    6
192 Power-Off_Retract_Count -O--CK   100   100   000    -    15
193 Load_Cycle_Count        -O---K   100   100   000    -    398
194 Temperature_Celsius     -O-RC-   036   044   000    -    36 (Min/Max 18/44)
195 Hardware_ECC_Recovered  -O--C-   100   253   000    -    0
197 Current_Pending_Sector  ----C-   100   100   000    -    0
198 Offline_Uncorrectable   -OSRCK   100   100   000    -    0
199 UDMA_CRC_Error_Count    ------   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O--CK   100   253   000    -    0
202 Data_Address_Mark_Errs  ------   096   249   000    -    4
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error aborted 
command
Read GP Log Directory failed.

SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    5 sectors [Comprehensive SMART error log]
SMART Log at address 0x03 has    5 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
SMART Log at address 0x07 has    1 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
SMART Log at address 0x20 has    1 sectors [Streaming performance log]
SMART Log at address 0x21 has    1 sectors [Write stream error log]
SMART Log at address 0x22 has    1 sectors [Read stream error log]
SMART Log at address 0x23 has    1 sectors [Delayed sector log]
SMART Log at address 0x80 has   16 sectors [Host vendor specific log]
SMART Log at address 0x81 has   16 sectors [Host vendor specific log]
SMART Log at address 0x82 has   16 sectors [Host vendor specific log]
SMART Log at address 0x83 has   16 sectors [Host vendor specific log]
SMART Log at address 0x84 has   16 sectors [Host vendor specific log]
SMART Log at address 0x85 has   16 sectors [Host vendor specific log]
SMART Log at address 0x86 has   16 sectors [Host vendor specific log]
SMART Log at address 0x87 has   16 sectors [Host vendor specific log]
SMART Log at address 0x88 has   16 sectors [Host vendor specific log]
SMART Log at address 0x89 has   16 sectors [Host vendor specific log]
SMART Log at address 0x8a has   16 sectors [Host vendor specific log]
SMART Log at address 0x8b has   16 sectors [Host vendor specific log]
SMART Log at address 0x8c has   16 sectors [Host vendor specific log]
SMART Log at address 0x8d has   16 sectors [Host vendor specific log]
SMART Log at address 0x8e has   16 sectors [Host vendor specific log]
SMART Log at address 0x8f has   16 sectors [Host vendor specific log]
SMART Log at address 0x90 has   16 sectors [Host vendor specific log]
SMART Log at address 0x91 has   16 sectors [Host vendor specific log]
SMART Log at address 0x92 has   16 sectors [Host vendor specific log]
SMART Log at address 0x93 has   16 sectors [Host vendor specific log]
SMART Log at address 0x94 has   16 sectors [Host vendor specific log]
SMART Log at address 0x95 has   16 sectors [Host vendor specific log]
SMART Log at address 0x96 has   16 sectors [Host vendor specific log]
SMART Log at address 0x97 has   16 sectors [Host vendor specific log]
SMART Log at address 0x98 has   16 sectors [Host vendor specific log]
SMART Log at address 0x99 has   16 sectors [Host vendor specific log]
SMART Log at address 0x9a has   16 sectors [Host vendor specific log]
SMART Log at address 0x9b has   16 sectors [Host vendor specific log]
SMART Log at address 0x9c has   16 sectors [Host vendor specific log]
SMART Log at address 0x9d has   16 sectors [Host vendor specific log]
SMART Log at address 0x9e has   16 sectors [Host vendor specific log]
SMART Log at address 0x9f has   16 sectors [Host vendor specific log]
SMART Log at address 0xa0 has    1 sectors [Device vendor specific log]
SMART Log at address 0xa1 has   20 sectors [Device vendor specific log]
SMART Log at address 0xa2 has  101 sectors [Device vendor specific log]
SMART Log at address 0xa8 has   20 sectors [Device vendor specific log]
SMART Log at address 0xa9 has    1 sectors [Device vendor specific log]
SMART Log at address 0xb0 has    1 sectors [Device vendor specific log]
SMART Log at address 0xb1 has   20 sectors [Device vendor specific log]
SMART Log at address 0xb2 has   20 sectors [Device vendor specific log]
SMART Log at address 0xb3 has    1 sectors [Device vendor specific log]
SMART Log at address 0xb4 has    4 sectors [Device vendor specific log]
SMART Log at address 0xbe has    1 sectors [Device vendor specific log]
SMART Log at address 0xbf has    1 sectors [Device vendor specific log]

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
No Errors Logged

SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%       235         -
# 2  Extended offline    Completed without error       00%       193         -
# 3  Short offline       Completed without error       00%        78         -
# 4  Extended offline    Completed without error       00%         2         -
# 5  Short offline       Completed without error       00%         2         -

Warning! SMART Selective Self-Test Log Structure error: invalid SMART checksum.
SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11) not supported
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2d-oct
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to