Below are the URLs and the smartctl output for the 

  WDC Scorpio Blue 3.0 Gb/s SATA HDD Drive

  http://www.wdc.com/en/products/products.aspx?id=140


# smartctl -i -r ioctl,2 /dev/sda

smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.el5] (local build) 
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net 
 
 [inquiry: 12 00 00 00 24 00 ] 
  scsi_status=0x0, host_status=0x0, driver_status=0x0 
  info=0x0  duration=1029 milliseconds  resid=0 
  Incoming data, len=36: 
 00     00 00 05 02 5b 00 00 00  41 54 41 20 20 20 20 20                        
 
 10     57 44 43 20 57 44 31 30  4a 50 56 54 2d 30 30 41                        
 
 20     30 31 2e 30                                                             
 
  status=0x0 
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] 
  scsi_status=0x0, host_status=0x0, driver_status=0x0 
  info=0x0  duration=1687 milliseconds  resid=0 
  Incoming data, len=512 [only first 256 bytes shown]: 
 00     7a 42 ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00                        
 
 10     00 00 00 00 20 20 20 20  57 20 2d 44 58 57 31 33                        
 
 20     37 41 4b 31 36 34 35 34  00 00 00 40 00 00 31 30                        
 
 30     30 2e 41 31 31 30 44 57  20 43 44 57 30 31 50 4a                        
 
 40     54 56 30 2d 41 30 59 31  30 54 20 20 20 20 20 20                        
 
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80                        
 
 60     00 00 00 2f 01 40 00 00  00 00 07 00 ff 3f 10 00                        
 
 70     3f 00 10 fc fb 00 00 01  ff ff ff 0f 00 00 07 00                        
 
 80     03 00 78 00 78 00 78 00  78 00 00 00 00 00 00 00                        
 
 90     00 00 00 00 00 00 1f 00  06 1f 04 00 4c 00 40 00                        
 
 a0     fe 01 00 00 6b 74 09 7d  23 61 69 74 09 bc 23 61                        
 
 b0     7f 40 5b 00 5b 00 80 00  fe ff 00 00 00 00 00 00                        
 
 c0     00 00 00 00 00 00 00 00  b0 6d 70 74 00 00 00 00                        
 
 d0     00 00 00 00 03 60 00 00  01 50 e2 4e 8c 5b 28 2b                        
 
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 18 40                        
 
 f0     18 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 
  status=0x0 
 
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE 
 Input:   FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN 
 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] 
  scsi_status=0x0, host_status=0x0, driver_status=0x0 
  info=0x0  duration=2078 milliseconds  resid=0 
  Incoming data, len=512 [only first 256 bytes shown]: 
 00     7a 42 ff 3f 37 c8 10 00  00 00 00 00 3f 00 00 00                        
 
 10     00 00 00 00 20 20 20 20  57 20 2d 44 58 57 31 33                        
 
 20     37 41 4b 31 36 34 35 34  00 00 00 40 00 00 31 30                        
 
 30     30 2e 41 31 31 30 44 57  20 43 44 57 30 31 50 4a                        
 
 40     54 56 30 2d 41 30 59 31  30 54 20 20 20 20 20 20                        
 
 50     20 20 20 20 20 20 20 20  20 20 20 20 20 20 10 80                        
 
 60     00 00 00 2f 01 40 00 00  00 00 07 00 ff 3f 10 00                        
 
 70     3f 00 10 fc fb 00 00 01  ff ff ff 0f 00 00 07 00                        
 
 80     03 00 78 00 78 00 78 00  78 00 00 00 00 00 00 00                        
 
 90     00 00 00 00 00 00 1f 00  06 1f 04 00 4c 00 40 00                        
 
 a0     fe 01 00 00 6b 74 09 7d  23 61 69 74 09 bc 23 61                        
 
 b0     7f 40 5b 00 5b 00 80 00  fe ff 00 00 00 00 00 00                        
 
 c0     00 00 00 00 00 00 00 00  b0 6d 70 74 00 00 00 00                        
 
 d0     00 00 00 00 03 60 00 00  01 50 e2 4e 8c 5b 28 2b                        
 
 e0     00 00 00 00 00 00 00 00  00 00 00 00 00 00 18 40                        
 
 f0     18 40 00 00 00 00 00 00  00 00 00 00 00 00 00 00                        
 
  status=0x0 
REPORT-IOCTL: Device=/dev/sda Command=IDENTIFY DEVICE returned 0 
 
===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 
000-015: 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |zB.?7.......?...| 
016-031: 00 00 00 00 20 20 20 20 57 20 2d 44 58 57 31 33 |....    W -DXW13| 
032-047: 37 41 4b 31 36 34 35 34 00 00 00 40 00 00 31 30 |7AK16454...@..10| 
048-063: 30 2e 41 31 31 30 44 57 20 43 44 57 30 31 50 4a |0.A110DW CDW01PJ| 
064-079: 54 56 30 2d 41 30 59 31 30 54 20 20 20 20 20 20 |TV0-A0Y10T      | 
080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 |              ..| 
096-111: 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 |.../.@.......?..| 
112-127: 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00 |?...............| 
128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......| 
144-159: 00 00 00 00 00 00 1f 00 06 1f 04 00 4c 00 40 00 |............L.@.| 
160-175: fe 01 00 00 6b 74 09 7d 23 61 69 74 09 bc 23 61 |....kt.}#ait..#a| 
176-191: 7f 40 5b 00 5b 00 80 00 fe ff 00 00 00 00 00 00 |.@[.[...........| 
192-207: 00 00 00 00 00 00 00 00 b0 6d 70 74 00 00 00 00 |.........mpt....| 
208-223: 00 00 00 00 03 60 00 00 01 50 e2 4e 8c 5b 28 2b |.....`...P.N.[(+| 
224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 18 40 |...............@| 
240-255: 18 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 
256-271: 21 00 00 00 00 00 00 00 00 00 e8 16 00 00 00 00 |!...............| 
272-287: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 |................| 
288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
400-415: 00 00 00 00 00 00 00 00 00 00 00 00 b5 70 00 00 |.............p..| 
416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............| 
432-447: 00 00 18 15 00 00 00 00 00 00 00 00 3e 10 00 00 |............>...| 
448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
464-479: 00 00 00 00 01 00 00 10 00 00 00 00 00 00 00 00 |................| 
480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 
496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 1c |................| 
===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== 
 
=== START OF INFORMATION SECTION === 
Device Model:     WDC WD10JPVT-00A1YT0 
Serial Number:    WD-WX31A71K4645 
LU WWN Device Id: 5 0014ee 25b8c2b28 
Firmware Version: 01.01A01 
User Capacity:    1,000,204,886,016 bytes [1.00 TB] 
Sector Sizes:     512 bytes logical, 4096 bytes physical 
Device is:        Not in smartctl database [for details use: -P showall] 
ATA Version is:   8 
ATA Standard is:  Exact ATA specification draft version not indicated 
Local Time is:    Fri Oct 14 21:27:20 2011 UTC 
SMART support is: Available - device has SMART capability. 
SMART support is: Enabled 



# smartctl -a /dev/sda

smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.el5] (local build) 
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net 
 
=== START OF INFORMATION SECTION === 
Device Model:     WDC WD10JPVT-00A1YT0 
Serial Number:    WD-WX31A71K4645 
LU WWN Device Id: 5 0014ee 25b8c2b28 
Firmware Version: 01.01A01 
User Capacity:    1,000,204,886,016 bytes [1.00 TB] 
Sector Sizes:     512 bytes logical, 4096 bytes physical 
Device is:        Not in smartctl database [for details use: -P showall] 
ATA Version is:   8 
ATA Standard is:  Exact ATA specification draft version not indicated 
Local Time is:    Fri Oct 14 20:58:00 2011 UTC 
SMART support is: Available - device has SMART capability. 
SMART support is: Enabled 
 
=== START OF READ SMART DATA SECTION === 
SMART overall-health self-assessment test result: PASSED 
 
General SMART Values: 
Offline data collection status:  (0x00) Offline data collection activity 
                                        was never started. 
                                        Auto Offline Data Collection: Disabled. 
Self-test execution status:      (   0) The previous self-test routine 
completed 
                                        without error or no self-test has ever  
                                        been run. 
Total time to complete Offline  
data collection:                (18000) seconds. 
Offline data collection 
capabilities:                    (0x7b) SMART execute Offline immediate. 
                                        Auto Offline data collection on/off 
support. 
                                        Suspend Offline collection upon new 
                                        command. 
                                        Offline surface scan supported. 
                                        Self-test supported. 
                                        Conveyance Self-test supported. 
                                        Selective Self-test supported. 
SMART capabilities:            (0x0003) Saves SMART data before entering 
                                        power-saving mode. 
                                        Supports SMART auto save timer. 
Error logging capability:        (0x01) Error logging supported. 
                                        General Purpose Logging supported. 
Short self-test routine  
recommended polling time:        (   2) minutes. 
Extended self-test routine 
recommended polling time:        ( 196) minutes. 
Conveyance self-test routine 
recommended polling time:        (   5) minutes. 
SCT capabilities:              (0x70b5) SCT Status supported. 
                                        SCT Feature Control supported. 
                                        SCT Data Table supported. 
 
SMART Attributes Data Structure revision number: 16 
Vendor Specific SMART Attributes with Thresholds: 
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE 
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       
-       0 
  3 Spin_Up_Time            0x0027   182   182   021    Pre-fail  Always       
-       1866 
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       
-       8 
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       
-       0 
  7 Seek_Error_Rate         0x002e   130   099   000    Old_age   Always       
-       1936 
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       
-       36 
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       
-       0 
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       
-       0 
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       
-       7 
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       
-       5 
193 Load_Cycle_Count        0x0032   189   189   000    Old_age   Always       
-       33058 
194 Temperature_Celsius     0x0022   120   119   000    Old_age   Always       
-       27 
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       
-       0 
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       
-       0 
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      
-       0 
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       
-       0 
200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      
-       0 
 
SMART Error Log Version: 1 
No Errors Logged 
 
SMART Self-test log structure revision number 1 
No self-tests have been logged.  [To run self-tests, use: smartctl -t] 
 
 
SMART Selective self-test log data structure revision number 1 
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS 
    1        0        0  Not_testing 
    2        0        0  Not_testing 
    3        0        0  Not_testing 
    4        0        0  Not_testing 
    5        0        0  Not_testing 
Selective self-test flags (0x0): 
  After scanning selected spans, do NOT read-scan remainder of disk. 
If Selective self-test is pending on power-up, resume after 0 minute delay. 


# smartctl -x /dev/sda

smartctl 5.42 2011-06-09 r3367M [x86_64-linux-2.6.18-238.el5] (local build) 
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net 
 
=== START OF INFORMATION SECTION === 
Device Model:     WDC WD10JPVT-00A1YT0 
Serial Number:    WD-WX31A71K4645 
LU WWN Device Id: 5 0014ee 25b8c2b28 
Firmware Version: 01.01A01 
User Capacity:    1,000,204,886,016 bytes [1.00 TB] 
Sector Sizes:     512 bytes logical, 4096 bytes physical 
Device is:        Not in smartctl database [for details use: -P showall] 
ATA Version is:   8 
ATA Standard is:  Exact ATA specification draft version not indicated 
Local Time is:    Fri Oct 14 20:58:16 2011 UTC 
SMART support is: Available - device has SMART capability. 
SMART support is: Enabled 
 
=== START OF READ SMART DATA SECTION === 
SMART overall-health self-assessment test result: PASSED 
 
General SMART Values: 
Offline data collection status:  (0x00) Offline data collection activity 
                                        was never started. 
                                        Auto Offline Data Collection: Disabled. 
Self-test execution status:      (   0) The previous self-test routine 
completed 
                                        without error or no self-test has ever  
                                        been run. 
Total time to complete Offline  
data collection:                (18000) seconds. 
Offline data collection 
capabilities:                    (0x7b) SMART execute Offline immediate. 
                                        Auto Offline data collection on/off 
support. 
                                        Suspend Offline collection upon new 
                                        command. 
                                        Offline surface scan supported. 
                                        Self-test supported. 
                                        Conveyance Self-test supported. 
                                        Selective Self-test supported. 
SMART capabilities:            (0x0003) Saves SMART data before entering 
                                        power-saving mode. 
                                        Supports SMART auto save timer. 
Error logging capability:        (0x01) Error logging supported. 
                                        General Purpose Logging supported. 
Short self-test routine  
recommended polling time:        (   2) minutes. 
Extended self-test routine 
recommended polling time:        ( 196) minutes. 
Conveyance self-test routine 
recommended polling time:        (   5) minutes. 
SCT capabilities:              (0x70b5) SCT Status supported. 
                                        SCT Feature Control supported. 
                                        SCT Data Table supported. 
 
SMART Attributes Data Structure revision number: 16 
Vendor Specific SMART Attributes with Thresholds: 
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE 
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    0 
  3 Spin_Up_Time            POS--K   182   182   021    -    1866 
  4 Start_Stop_Count        -O--CK   100   100   000    -    8 
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0 
  7 Seek_Error_Rate         -OSR-K   130   099   000    -    1936 
  9 Power_On_Hours          -O--CK   100   100   000    -    36 
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0 
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0 
 12 Power_Cycle_Count       -O--CK   100   100   000    -    7 
192 Power-Off_Retract_Count -O--CK   200   200   000    -    5 
193 Load_Cycle_Count        -O--CK   189   189   000    -    33058 
194 Temperature_Celsius     -O---K   120   119   000    -    27 
196 Reallocated_Event_Count -O--CK   200   200   000    -    0 
197 Current_Pending_Sector  -O--CK   200   200   000    -    0 
198 Offline_Uncorrectable   ----CK   100   253   000    -    0 
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0 
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0 
                            ||||||_ K auto-keep 
                            |||||__ C event count 
                            ||||___ R error rate 
                            |||____ S speed/performance 
                            ||_____ O updated online 
                            |______ P prefailure warning 
 
General Purpose Log Directory Version 1 
SMART           Log Directory Version 1 [multi-sector log support] 
GP/S  Log at address 0x00 has    1 sectors [Log Directory] 
SMART Log at address 0x01 has    1 sectors [Summary SMART error log] 
SMART Log at address 0x02 has    5 sectors [Comprehensive SMART error log] 
GP    Log at address 0x03 has    6 sectors [Ext. Comprehensive SMART error log] 
SMART Log at address 0x06 has    1 sectors [SMART self-test log] 
GP    Log at address 0x07 has    1 sectors [Extended self-test log] 
SMART Log at address 0x09 has    1 sectors [Selective self-test log] 
GP    Log at address 0x10 has    1 sectors [NCQ Command Error] 
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters] 
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log] 
GP/S  Log at address 0xa0 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa1 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa2 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa3 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa4 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa5 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa6 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa7 has   16 sectors [Device vendor specific log] 
GP/S  Log at address 0xa8 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xa9 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xaa has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xab has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xac has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xad has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xae has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xaf has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb0 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb1 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb2 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb3 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb4 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb5 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb6 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xb7 has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xbd has    1 sectors [Device vendor specific log] 
GP/S  Log at address 0xc0 has    1 sectors [Device vendor specific log] 
GP    Log at address 0xc1 has   93 sectors [Device vendor specific log] 
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status] 
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer] 
 
SMART Extended Comprehensive Error Log Version: 1 (6 sectors) 
No Errors Logged 
 
SMART Extended Self-test Log Version: 1 (1 sectors) 
No self-tests have been logged.  [To run self-tests, use: smartctl -t] 
 
SMART Selective self-test log data structure revision number 1 
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS 
    1        0        0  Not_testing 
    2        0        0  Not_testing 
    3        0        0  Not_testing 
    4        0        0  Not_testing 
    5        0        0  Not_testing 
Selective self-test flags (0x0): 
  After scanning selected spans, do NOT read-scan remainder of disk. 
If Selective self-test is pending on power-up, resume after 0 minute delay. 
 
SCT Status Version:                  3 
SCT Version (vendor specific):       258 (0x0102) 
SCT Support Level:                   1 
Device State:                        Active (0) 
Current Temperature:                    27 Celsius 
Power Cycle Min/Max Temperature:     27/28 Celsius 
Lifetime    Min/Max Temperature:     25/31 Celsius 
Under/Over Temperature Limit Count:   0/0 
SCT Temperature History Version:     2 
Temperature Sampling Period:         1 minute 
Temperature Logging Interval:        1 minute 
Min/Max recommended Temperature:      0/60 Celsius 
Min/Max Temperature Limit:           -41/85 Celsius 
Temperature History Size (Index):    128 (12) 
 
Index    Estimated Time   Temperature Celsius 
  13    2011-10-14 18:51    28  ********* 
 ...    ..( 14 skipped).    ..  ********* 
  28    2011-10-14 19:06    28  ********* 
  29    2011-10-14 19:07    27  ******** 
 ...    ..(  6 skipped).    ..  ******** 
  36    2011-10-14 19:14    27  ******** 
  37    2011-10-14 19:15    28  ********* 
 ...    ..(  6 skipped).    ..  ********* 
  44    2011-10-14 19:22    28  ********* 
  45    2011-10-14 19:23    27  ******** 
 ...    ..( 80 skipped).    ..  ******** 
 126    2011-10-14 20:44    27  ******** 
 127    2011-10-14 20:45    28  ********* 
 ...    ..(  2 skipped).    ..  ********* 
   2    2011-10-14 20:48    28  ********* 
   3    2011-10-14 20:49    27  ******** 
 ...    ..(  8 skipped).    ..  ******** 
  12    2011-10-14 20:58    27  ******** 
 
Warning: device does not support SCT Error Recovery Control command 
SATA Phy Event Counters (GP Log 0x11) 
ID      Size     Value  Description 
0x0001  2            0  Command failed due to ICRC error 
0x0002  2            0  R_ERR response for data FIS 
0x0003  2            0  R_ERR response for device-to-host data FIS 
0x0004  2            0  R_ERR response for host-to-device data FIS 
0x0005  2            0  R_ERR response for non-data FIS 
0x0006  2            0  R_ERR response for device-to-host non-data FIS 
0x0007  2            0  R_ERR response for host-to-device non-data FIS 
0x0008  2            0  Device-to-host non-data FIS retries 
0x0009  2           14  Transition from drive PhyRdy to drive PhyNRdy 
0x000a  2           15  Device-to-host register FISes sent due to a COMRESET 
0x000b  2            0  CRC errors within host-to-device FIS 
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC 
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC 
0x8000  4         8913  Vendor specific 







------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2d-oct
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to