--
NEU: FreePhone - 0ct/min Handyspartarif mit Geld-zurück-Garantie!
Jetzt informieren: http://www.gmx.net/de/go/freephone
smartctl 5.42 2011-10-11 r3440 [i686-linux-2.6.38-grml] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: HITACHI_DK14FA-20
Serial Number: 3GL327
Firmware Version: 00MBA0A5
User Capacity: 20,003,880,960 bytes [20.0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 5
ATA Standard is: ATA/ATAPI-5 T13 1321D revision 3
Local Time is: Fri Oct 14 23:06:57 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1270) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 22) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate P-SR-- 099 099 050 - 47244640355
2 Throughput_Performance P-S--- 100 100 050 - 24270
3 Spin_Up_Time POS--- 098 098 050 - 1
4 Start_Stop_Count -O--CK 091 091 000 - 9584
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 100 100 050 - 952
8 Seek_Time_Performance P-S--- 100 100 050 - 1297
9 Power_On_Hours -O--CK 100 100 000 - 16325
10 Spin_Retry_Count PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1658
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 2
192 Power-Off_Retract_Count -O--CK 100 100 000 - 51
193 Load_Cycle_Count -O--CK 098 098 000 - 227650057525
194 Temperature_Celsius -O---K 098 078 000 - 19 (Min/Max 9/45)
195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 223
200 Multi_Zone_Error_Rate PO--C- 100 100 050 - 0
201 Soft_Read_Error_Rate -O--C- 100 100 000 - 0
223 Load_Retry_Count -O--C- 100 100 000 - 0
230 Head_Amplitude -O--CK 100 100 000 - 4651
250 Read_Error_Retry_Rate -O-R-- 100 100 000 - 326
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: scsi error aborted
command
Read GP Log Directory failed.
SMART Log Directory Version 1 [multi-sector log support]
SMART Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
SMART Log at address 0x80 has 16 sectors [Host vendor specific log]
SMART Log at address 0x81 has 16 sectors [Host vendor specific log]
SMART Log at address 0x82 has 16 sectors [Host vendor specific log]
SMART Log at address 0x83 has 16 sectors [Host vendor specific log]
SMART Log at address 0x84 has 16 sectors [Host vendor specific log]
SMART Log at address 0x85 has 16 sectors [Host vendor specific log]
SMART Log at address 0x86 has 16 sectors [Host vendor specific log]
SMART Log at address 0x87 has 16 sectors [Host vendor specific log]
SMART Log at address 0x88 has 16 sectors [Host vendor specific log]
SMART Log at address 0x89 has 16 sectors [Host vendor specific log]
SMART Log at address 0x8a has 16 sectors [Host vendor specific log]
SMART Log at address 0x8b has 16 sectors [Host vendor specific log]
SMART Log at address 0x8c has 16 sectors [Host vendor specific log]
SMART Log at address 0x8d has 16 sectors [Host vendor specific log]
SMART Log at address 0x8e has 16 sectors [Host vendor specific log]
SMART Log at address 0x8f has 16 sectors [Host vendor specific log]
SMART Log at address 0x90 has 16 sectors [Host vendor specific log]
SMART Log at address 0x91 has 16 sectors [Host vendor specific log]
SMART Log at address 0x92 has 16 sectors [Host vendor specific log]
SMART Log at address 0x93 has 16 sectors [Host vendor specific log]
SMART Log at address 0x94 has 16 sectors [Host vendor specific log]
SMART Log at address 0x95 has 16 sectors [Host vendor specific log]
SMART Log at address 0x96 has 16 sectors [Host vendor specific log]
SMART Log at address 0x97 has 16 sectors [Host vendor specific log]
SMART Log at address 0x98 has 16 sectors [Host vendor specific log]
SMART Log at address 0x99 has 16 sectors [Host vendor specific log]
SMART Log at address 0x9a has 16 sectors [Host vendor specific log]
SMART Log at address 0x9b has 16 sectors [Host vendor specific log]
SMART Log at address 0x9c has 16 sectors [Host vendor specific log]
SMART Log at address 0x9d has 16 sectors [Host vendor specific log]
SMART Log at address 0x9e has 16 sectors [Host vendor specific log]
SMART Log at address 0x9f has 16 sectors [Host vendor specific log]
SMART Log at address 0xa0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa1 has 96 sectors [Device vendor specific log]
SMART Log at address 0xa2 has 96 sectors [Device vendor specific log]
SMART Log at address 0xa3 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa4 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa5 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa6 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa7 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa8 has 1 sectors [Device vendor specific log]
SMART Log at address 0xa9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xaa has 1 sectors [Device vendor specific log]
SMART Log at address 0xab has 1 sectors [Device vendor specific log]
SMART Log at address 0xac has 1 sectors [Device vendor specific log]
SMART Log at address 0xad has 1 sectors [Device vendor specific log]
SMART Log at address 0xae has 1 sectors [Device vendor specific log]
SMART Log at address 0xaf has 1 sectors [Device vendor specific log]
SMART Log at address 0xb0 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb1 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb2 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb3 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb4 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb5 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb6 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb7 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb8 has 1 sectors [Device vendor specific log]
SMART Log at address 0xb9 has 1 sectors [Device vendor specific log]
SMART Log at address 0xba has 1 sectors [Device vendor specific log]
SMART Log at address 0xbb has 1 sectors [Device vendor specific log]
SMART Log at address 0xbc has 1 sectors [Device vendor specific log]
SMART Log at address 0xbd has 1 sectors [Device vendor specific log]
SMART Log at address 0xbe has 1 sectors [Device vendor specific log]
SMART Log at address 0xbf has 1 sectors [Device vendor specific log]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log Version: 1
ATA Error Count: 241 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 241 occurred at disk power-on lifetime: 187 hours (7 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 40 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000040 = 64
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 40 00 00 f0 00 00:13:49.690 READ DMA
10 00 3f 00 00 00 f0 00 00:13:49.690 RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ff 00 00:13:49.690 INITIALIZE DEVICE PARAMETERS
[OBS-6]
00 03 41 40 00 00 a0 06 00:13:49.620 NOP [Reserved subcommand]
ef 03 41 40 00 00 f0 02 00:13:49.620 SET FEATURES [Set transfer mode]
Error 240 occurred at disk power-on lifetime: 187 hours (7 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 40 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000040 = 64
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 40 00 00 f0 00 00:13:49.450 READ DMA
c8 00 01 40 00 00 f0 00 00:13:49.290 READ DMA
10 00 3f 00 00 00 f0 00 00:13:49.290 RECALIBRATE [OBS-4]
c8 00 01 40 00 00 f0 00 00:13:49.130 READ DMA
c8 00 01 40 00 00 f0 00 00:13:48.990 READ DMA
Error 239 occurred at disk power-on lifetime: 187 hours (7 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 40 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000040 = 64
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 40 00 00 f0 00 00:13:49.290 READ DMA
10 00 3f 00 00 00 f0 00 00:13:49.290 RECALIBRATE [OBS-4]
c8 00 01 40 00 00 f0 00 00:13:49.130 READ DMA
c8 00 01 40 00 00 f0 00 00:13:48.990 READ DMA
10 00 3f 00 00 00 f0 00 00:13:48.990 RECALIBRATE [OBS-4]
Error 238 occurred at disk power-on lifetime: 187 hours (7 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 40 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000040 = 64
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 40 00 00 f0 00 00:13:49.130 READ DMA
c8 00 01 40 00 00 f0 00 00:13:48.990 READ DMA
10 00 3f 00 00 00 f0 00 00:13:48.990 RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ff 00 00:13:48.990 INITIALIZE DEVICE PARAMETERS
[OBS-6]
00 03 42 40 00 00 a0 06 00:13:48.920 NOP [Reserved subcommand]
Error 237 occurred at disk power-on lifetime: 187 hours (7 days + 19 hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 00 40 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000040 = 64
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 01 40 00 00 f0 00 00:13:48.990 READ DMA
10 00 3f 00 00 00 f0 00 00:13:48.990 RECALIBRATE [OBS-4]
91 00 3f 3f ff 3f ff 00 00:13:48.990 INITIALIZE DEVICE PARAMETERS
[OBS-6]
00 03 42 40 00 00 a0 06 00:13:48.920 NOP [Reserved subcommand]
ef 03 42 40 00 00 f0 02 00:13:48.920 SET FEATURES [Set transfer mode]
SMART Extended Self-test Log (GP Log 0x07) not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 272 -
# 2 Extended offline Completed without error 00% 271 -
# 3 Extended offline Completed without error 00% 218 -
# 4 Extended offline Completed without error 00% 190 -
# 5 Short offline Completed without error 00% 133 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11) not supported
------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2d-oct
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
