Hello,
attached the txt-file:
The (external USB) Seagate Portable Expansion ST9640322AS apparently is
not in your database.
Also, there is a problem running the long offline test on it:
It keeps aborting it after finishing about 10 per cent of the disk, and
reports it as "manually aborted", even though I did not do anything
(shown in the txt-file). Therefore, I have never been able to run a long
test.
Short tests work, though.
Thank you!
Greetings,
Philipp
ubuntu@ubuntu:~$ sudo smartctl -a /dev/sdc
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-14-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST9640322AS
Serial Number: 5WX07KJB
LU WWN Device Id: 5 000c50 018fff2c1
Firmware Version: 0001BSM2
User Capacity: 640.135.028.736 bytes [640 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical (offset 512 bytes)
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 4
Local Time is: Wed Dec 21 06:38:43 2011 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 174) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 116 099 006 Pre-fail Always
- 112292232
3 Spin_Up_Time 0x0003 098 097 000 Pre-fail Always
- 0
4 Start_Stop_Count 0x0032 096 096 020 Old_age Always
- 4488
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000f 055 052 030 Pre-fail Always
- 51543625754
9 Power_On_Hours 0x0032 098 098 000 Old_age Always
- 2321
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 099 099 020 Old_age Always
- 1240
184 End-to-End_Error 0x0032 100 100 099 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
188 Command_Timeout 0x0032 100 099 000 Old_age Always
- 25770196998
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 069 046 045 Old_age Always
- 31 (Min/Max 31/32)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always
- 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 343
193 Load_Cycle_Count 0x0032 089 089 000 Old_age Always
- 22257
194 Temperature_Celsius 0x0022 031 054 000 Old_age Always
- 31 (0 14 0 0)
195 Hardware_ECC_Recovered 0x001a 050 048 000 Old_age Always
- 112292232
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
250 Read_Error_Retry_Rate 0x0032 100 001 000 Old_age Always
- 2
251 Unknown_Attribute 0x000e 100 001 000 Old_age Always
- 1
252 Unknown_Attribute 0x0000 100 001 000 Old_age Offline
- 0
254 Free_Fall_Sensor 0x0000 100 100 000 Old_age Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 2320 -
# 2 Extended offline Aborted by host 90% 2312 -
# 3 Short offline Completed without error 00% 2311 -
# 4 Extended offline Aborted by host 90% 2301 -
# 5 Extended offline Aborted by host 90% 2301 -
# 6 Extended offline Aborted by host 90% 2301 -
# 7 Conveyance offline Completed without error 00% 2298 -
# 8 Extended offline Aborted by host 90% 2298 -
# 9 Short offline Completed without error 00% 2298 -
#10 Conveyance offline Completed without error 00% 2221 -
#11 Short offline Completed without error 00% 2221 -
#12 Extended offline Aborted by host 90% 2219 -
#13 Conveyance offline Completed without error 00% 2219 -
#14 Short offline Completed without error 00% 2219 -
#15 Short offline Completed without error 00% 1983 -
#16 Conveyance offline Completed without error 00% 1983 -
#17 Conveyance offline Completed without error 00% 1963 -
#18 Short offline Completed without error 00% 1963 -
#19 Short offline Completed without error 00% 1961 -
#20 Short offline Completed without error 00% 1921 -
#21 Short offline Completed without error 00% 1898 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
ubuntu@ubuntu:~$ sudo smartctl -V /dev/sdc
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.0.0-14-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
smartctl comes with ABSOLUTELY NO WARRANTY. This is free
software, and you are welcome to redistribute it under
the terms of the GNU General Public License Version 2.
See http://www.gnu.org for further details.
smartmontools release 5.41 dated 2011-06-09 at 18:46:32 UTC
smartmontools SVN rev 3365 dated 2011-06-09 at 18:47:31
smartmontools build host: i686-pc-linux-gnu
smartmontools build configured: 2011-06-20 08:52:16 UTC
smartctl compile dated Jun 20 2011 at 08:52:26
smartmontools configure arguments: '--prefix=/usr' '--sysconfdir=/etc'
'--mandir=/usr/share/man' '--with-initscriptdir=/etc/init.d'
'--with-docdir=/usr/share/doc/smartmontools' '--enable-drivedb'
'--enable-savestates' '--enable-attributelog'
'--with-savestates=/var/lib/smartmontools/smartd.'
'--with-attributelog=/var/lib/smartmontools/attrlog.'
'--with-exampledir=/usr/share/doc/smartmontools/examples/' '--with-selinux'
'CXXFLAGS=-g -O2' 'LDFLAGS=-Wl,-Bsymbolic-functions' 'CPPFLAGS=' 'CFLAGS=-g -O2
-fsigned-char -Wall -O2'
ubuntu@ubuntu:~$
------------------------------------------------------------------------------
Write once. Port to many.
Get the SDK and tools to simplify cross-platform app development. Create
new or port existing apps to sell to consumers worldwide. Explore the
Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join
http://p.sf.net/sfu/intel-appdev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
