Oops. I forgot "-r ioctl,2" needs another flag (like -i) to show the complete output.
# smartctl -i -r ioctl,2 /dev/sdb smartctl 5.43 2012-04-02 r3535M [x86_64-linux-2.6.18-308.el5] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net [inquiry: 12 00 00 00 24 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=0 milliseconds resid=0 Incoming data, len=36: 00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20 10 57 44 43 20 57 44 31 30 45 55 43 58 2d 36 33 59 20 35 31 2e 30 status=0x0 [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=2 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 30 43 20 30 53 37 34 33 35 39 37 00 00 00 80 32 00 31 35 30 30 2e 42 41 32 35 44 57 20 43 44 57 30 31 55 45 40 58 43 36 2d 59 33 31 5a 30 59 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 17 04 00 44 00 40 00 a0 fe 01 00 00 6b 74 61 7f 33 47 69 74 41 be 23 47 b0 7f 40 5b 00 5b 00 00 00 fe ff 00 00 80 80 08 00 c0 00 00 00 00 a0 86 01 00 b0 6d 70 74 00 00 00 00 d0 00 00 00 00 03 60 00 00 01 50 e2 4e 1b b1 68 0d e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE Input: FR=...., SC=0x01, LL=...., LM=...., LH=...., DEV=...., CMD=0xec IN [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] scsi_status=0x0, host_status=0x0, driver_status=0x0 info=0x0 duration=3 milliseconds resid=0 Incoming data, len=512 [only first 256 bytes shown]: 00 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 10 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 30 43 20 30 53 37 34 33 35 39 37 00 00 00 80 32 00 31 35 30 30 2e 42 41 32 35 44 57 20 43 44 57 30 31 55 45 40 58 43 36 2d 59 33 31 5a 30 59 20 20 20 20 20 20 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 60 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 70 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 90 00 00 00 00 00 00 1f 00 0e 17 04 00 44 00 40 00 a0 fe 01 00 00 6b 74 61 7f 33 47 69 74 41 be 23 47 b0 7f 40 5b 00 5b 00 00 00 fe ff 00 00 80 80 08 00 c0 00 00 00 00 a0 86 01 00 b0 6d 70 74 00 00 00 00 d0 00 00 00 00 03 60 00 00 01 50 e2 4e 1b b1 68 0d e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 status=0x0 [Duration: 0.003s] REPORT-IOCTL: Device=/dev/sdb Command=IDENTIFY DEVICE returned 0 ===== [IDENTIFY DEVICE] DATA START (BASE-16) ===== 000-015: 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 |zB.?7.......?...| 016-031: 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 30 43 |.... W -DCW0C| 032-047: 30 53 37 34 33 35 39 37 00 00 00 80 32 00 31 35 |0S743597....2.15| 048-063: 30 2e 42 41 32 35 44 57 20 43 44 57 30 31 55 45 |0.BA25DW CDW01UE| 064-079: 58 43 36 2d 59 33 31 5a 30 59 20 20 20 20 20 20 |XC6-Y31Z0Y | 080-095: 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 | ..| 096-111: 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 |.../.@.......?..| 112-127: 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00 |?...............| 128-143: 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 |..x.x.x.x.......| 144-159: 00 00 00 00 00 00 1f 00 0e 17 04 00 44 00 40 00 |............D.@.| 160-175: fe 01 00 00 6b 74 61 7f 33 47 69 74 41 be 23 47 |....kta.3GitA.#G| 176-191: 7f 40 5b 00 5b 00 00 00 fe ff 00 00 80 80 08 00 |.@[.[...........| 192-207: 00 00 00 00 a0 86 01 00 b0 6d 70 74 00 00 00 00 |.........mpt....| 208-223: 00 00 00 00 03 60 00 00 01 50 e2 4e 1b b1 68 0d |.....`...P.N..h.| 224-239: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 |...............@| 240-255: 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |.@..............| 256-271: 21 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |!...............| 272-287: 00 00 00 00 00 00 00 00 00 00 00 00 04 00 00 00 |................| 288-303: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 304-319: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 320-335: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 336-351: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 352-367: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 368-383: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 384-399: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 400-415: 00 00 00 00 00 00 00 00 00 00 00 00 b5 30 00 00 |.............0..| 416-431: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 |...@............| 432-447: 00 00 00 00 00 00 00 00 00 00 00 00 3e 10 00 00 |............>...| 448-463: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 464-479: 00 00 00 00 01 00 00 10 00 00 00 00 00 00 00 00 |................| 480-495: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 496-511: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 a5 c2 |................| ===== [IDENTIFY DEVICE] DATA END (512 Bytes) ===== === START OF INFORMATION SECTION === Device Model: WDC WD10EUCX-63YZ1Y0 Serial Number: WD-WCC0S0475379 LU WWN Device Id: 5 0014ee 2b11b0d68 Firmware Version: 51.0AB52 User Capacity: 1,000,204,886,016 bytes [1.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Fri Apr 20 23:28:12 2012 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled On Fri, 2012-04-20 at 16:37 -0700, Victor Payno wrote: > Here are the URL and the smartctl output for > > WDC AV-GP WD10EUCX-63YZ1Y0 3.5-inch SATA 6 Gb/s > > URL: http://wdc.com/en/products/products.aspx?id=150 > > > # smartctl -i /dev/sdb > > smartctl 5.43 2012-04-02 r3535M [x86_64-linux-2.6.18-308.el5] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Device Model: WDC WD10EUCX-63YZ1Y0 > Serial Number: WD-WCC0S0475379 > LU WWN Device Id: 5 0014ee 2b11b0d68 > Firmware Version: 51.0AB52 > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Fri Apr 20 23:33:11 2012 UTC > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > > # smartctl -r ioctl,2 /dev/sdb > > smartctl 5.43 2012-04-02 r3535M [x86_64-linux-2.6.18-308.el5] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > [inquiry: 12 00 00 00 24 00 ] > scsi_status=0x0, host_status=0x0, driver_status=0x0 > info=0x0 duration=0 milliseconds resid=0 > Incoming data, len=36: > 00 00 00 05 02 5b 00 00 00 41 54 41 20 20 20 20 20 > > 10 57 44 43 20 57 44 31 30 45 55 43 58 2d 36 33 59 > > 20 35 31 2e 30 > > status=0x0 > [ata pass-through(16): 85 08 0e 00 00 00 01 00 00 00 00 00 00 00 ec 00 ] > scsi_status=0x0, host_status=0x0, driver_status=0x0 > info=0x0 duration=2 milliseconds resid=0 > Incoming data, len=512 [only first 256 bytes shown]: > 00 7a 42 ff 3f 37 c8 10 00 00 00 00 00 3f 00 00 00 > > 10 00 00 00 00 20 20 20 20 57 20 2d 44 43 57 30 43 > > 20 30 53 37 34 33 35 39 37 00 00 00 80 32 00 31 35 > > 30 30 2e 42 41 32 35 44 57 20 43 44 57 30 31 55 45 > > 40 58 43 36 2d 59 33 31 5a 30 59 20 20 20 20 20 20 > > 50 20 20 20 20 20 20 20 20 20 20 20 20 20 20 10 80 > > 60 00 00 00 2f 01 40 00 00 00 00 07 00 ff 3f 10 00 > > 70 3f 00 10 fc fb 00 00 01 ff ff ff 0f 00 00 07 00 > > 80 03 00 78 00 78 00 78 00 78 00 00 00 00 00 00 00 > > 90 00 00 00 00 00 00 1f 00 0e 17 04 00 44 00 40 00 > > a0 fe 01 00 00 6b 74 61 7f 33 47 69 74 41 be 23 47 > > b0 7f 40 5b 00 5b 00 00 00 fe ff 00 00 80 80 08 00 > > c0 00 00 00 00 a0 86 01 00 b0 6d 70 74 00 00 00 00 > > d0 00 00 00 00 03 60 00 00 01 50 e2 4e 1b b1 68 0d > > e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 40 > > f0 1c 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > > status=0x0 > ATA device successfully opened > > Use 'smartctl -a' (or '-x') to print SMART (and more) information > > > # smartctl -l devstat,0 -l devstat /dev/sdb > > smartctl 5.43 2012-04-02 r3535M [x86_64-linux-2.6.18-308.el5] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > Device Statistics (GP Log 0x04) not supported > > > # smartctl -a /dev/sdb > > smartctl 5.43 2012-04-02 r3535M [x86_64-linux-2.6.18-308.el5] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Device Model: WDC WD10EUCX-63YZ1Y0 > Serial Number: WD-WCC0S0475379 > LU WWN Device Id: 5 0014ee 2b11b0d68 > Firmware Version: 51.0AB52 > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Fri Apr 20 23:33:11 2012 UTC > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: > Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has > ever > been run. > Total time to complete Offline > data collection: (18000) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off > support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 176) minutes. > Conveyance self-test routine > recommended polling time: ( 5) minutes. > SCT capabilities: (0x30b5) SCT Status supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED > WHEN_FAILED RAW_VALUE > 1 Raw_Read_Error_Rate 0x002f 100 253 051 Pre-fail Always > - 0 > 3 Spin_Up_Time 0x0027 100 253 021 Pre-fail Always > - 0 > 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always > - 3 > 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always > - 0 > 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always > - 0 > 9 Power_On_Hours 0x0032 100 100 000 Old_age Always > - 1 > 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always > - 0 > 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always > - 0 > 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always > - 2 > 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always > - 1 > 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always > - 1 > 194 Temperature_Celsius 0x0022 121 108 000 Old_age Always > - 26 > 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always > - 0 > 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always > - 0 > 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline > - 0 > 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always > - 0 > 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline > - 0 > > SMART Error Log Version: 1 > No Errors Logged > > SMART Self-test log structure revision number 1 > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > > # smartctl -x /dev/sdb > > smartctl 5.43 2012-04-02 r3535M [x86_64-linux-2.6.18-308.el5] (local build) > Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net > > === START OF INFORMATION SECTION === > Device Model: WDC WD10EUCX-63YZ1Y0 > Serial Number: WD-WCC0S0475379 > LU WWN Device Id: 5 0014ee 2b11b0d68 > Firmware Version: 51.0AB52 > User Capacity: 1,000,204,886,016 bytes [1.00 TB] > Sector Sizes: 512 bytes logical, 4096 bytes physical > Device is: Not in smartctl database [for details use: -P showall] > ATA Version is: 8 > ATA Standard is: Exact ATA specification draft version not indicated > Local Time is: Fri Apr 20 23:33:12 2012 UTC > SMART support is: Available - device has SMART capability. > SMART support is: Enabled > AAM level is: 128 (quiet), recommended: 128 > APM feature is: Unavailable > Rd look-ahead is: Enabled > Write cache is: Enabled > ATA Security is: Disabled, NOT FROZEN [SEC1] > > === START OF READ SMART DATA SECTION === > SMART overall-health self-assessment test result: PASSED > > General SMART Values: > Offline data collection status: (0x00) Offline data collection activity > was never started. > Auto Offline Data Collection: > Disabled. > Self-test execution status: ( 0) The previous self-test routine > completed > without error or no self-test has > ever > been run. > Total time to complete Offline > data collection: (18000) seconds. > Offline data collection > capabilities: (0x7b) SMART execute Offline immediate. > Auto Offline data collection on/off > support. > Suspend Offline collection upon new > command. > Offline surface scan supported. > Self-test supported. > Conveyance Self-test supported. > Selective Self-test supported. > SMART capabilities: (0x0003) Saves SMART data before entering > power-saving mode. > Supports SMART auto save timer. > Error logging capability: (0x01) Error logging supported. > General Purpose Logging supported. > Short self-test routine > recommended polling time: ( 2) minutes. > Extended self-test routine > recommended polling time: ( 176) minutes. > Conveyance self-test routine > recommended polling time: ( 5) minutes. > SCT capabilities: (0x30b5) SCT Status supported. > SCT Feature Control supported. > SCT Data Table supported. > > SMART Attributes Data Structure revision number: 16 > Vendor Specific SMART Attributes with Thresholds: > ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE > 1 Raw_Read_Error_Rate POSR-K 100 253 051 - 0 > 3 Spin_Up_Time POS--K 100 253 021 - 0 > 4 Start_Stop_Count -O--CK 100 100 000 - 3 > 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 > 7 Seek_Error_Rate -OSR-K 100 253 000 - 0 > 9 Power_On_Hours -O--CK 100 100 000 - 1 > 10 Spin_Retry_Count -O--CK 100 253 000 - 0 > 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 > 12 Power_Cycle_Count -O--CK 100 100 000 - 2 > 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1 > 193 Load_Cycle_Count -O--CK 200 200 000 - 1 > 194 Temperature_Celsius -O---K 121 108 000 - 26 > 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 > 197 Current_Pending_Sector -O--CK 200 200 000 - 0 > 198 Offline_Uncorrectable ----CK 100 253 000 - 0 > 199 UDMA_CRC_Error_Count -O--CK 200 253 000 - 0 > 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 > ||||||_ K auto-keep > |||||__ C event count > ||||___ R error rate > |||____ S speed/performance > ||_____ O updated online > |______ P prefailure warning > > General Purpose Log Directory Version 1 > SMART Log Directory Version 1 [multi-sector log support] > GP/S Log at address 0x00 has 1 sectors [Log Directory] > SMART Log at address 0x01 has 1 sectors [Summary SMART error log] > SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] > GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error > log] > SMART Log at address 0x06 has 1 sectors [SMART self-test log] > GP Log at address 0x07 has 1 sectors [Extended self-test log] > SMART Log at address 0x09 has 1 sectors [Selective self-test log] > GP Log at address 0x10 has 1 sectors [NCQ Command Error log] > GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] > GP Log at address 0x21 has 1 sectors [Write stream error log] > GP Log at address 0x22 has 1 sectors [Read stream error log] > GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] > GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] > GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] > GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] > GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] > GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] > GP/S Log at address 0xab has 1 sectors [Device vendor specific log] > GP/S Log at address 0xac has 1 sectors [Device vendor specific log] > GP/S Log at address 0xad has 1 sectors [Device vendor specific log] > GP/S Log at address 0xae has 1 sectors [Device vendor specific log] > GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] > GP/S Log at address 0xbd has 1 sectors [Device vendor specific log] > GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] > GP Log at address 0xc1 has 93 sectors [Device vendor specific log] > GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] > GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] > > SMART Extended Comprehensive Error Log Version: 1 (6 sectors) > No Errors Logged > > SMART Extended Self-test Log Version: 1 (1 sectors) > No self-tests have been logged. [To run self-tests, use: smartctl -t] > > SMART Selective self-test log data structure revision number 1 > SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS > 1 0 0 Not_testing > 2 0 0 Not_testing > 3 0 0 Not_testing > 4 0 0 Not_testing > 5 0 0 Not_testing > Selective self-test flags (0x0): > After scanning selected spans, do NOT read-scan remainder of disk. > If Selective self-test is pending on power-up, resume after 0 minute delay. > > SCT Status Version: 3 > SCT Version (vendor specific): 258 (0x0102) > SCT Support Level: 1 > Device State: Active (0) > Current Temperature: 26 Celsius > Power Cycle Min/Max Temperature: 25/26 Celsius > Lifetime Min/Max Temperature: 25/39 Celsius > Under/Over Temperature Limit Count: 0/0 > SCT Temperature History Version: 2 > Temperature Sampling Period: 1 minute > Temperature Logging Interval: 1 minute > Min/Max recommended Temperature: 0/60 Celsius > Min/Max Temperature Limit: -41/85 Celsius > Temperature History Size (Index): 478 (98) > > Index Estimated Time Temperature Celsius > 99 2012-04-20 15:36 ? - > ... ..(378 skipped). .. - > 0 2012-04-20 21:55 ? - > 1 2012-04-20 21:56 39 ******************** > 2 2012-04-20 21:57 ? - > 3 2012-04-20 21:58 39 ******************** > 4 2012-04-20 21:59 39 ******************** > 5 2012-04-20 22:00 ? - > 6 2012-04-20 22:01 25 ****** > ... ..( 10 skipped). .. ****** > 17 2012-04-20 22:12 25 ****** > 18 2012-04-20 22:13 26 ******* > ... ..( 79 skipped). .. ******* > 98 2012-04-20 23:33 26 ******* > > Warning: device does not support SCT Error Recovery Control command > SATA Phy Event Counters (GP Log 0x11) > ID Size Value Description > 0x0001 2 0 Command failed due to ICRC error > 0x0002 2 0 R_ERR response for data FIS > 0x0003 2 0 R_ERR response for device-to-host data FIS > 0x0004 2 0 R_ERR response for host-to-device data FIS > 0x0005 2 0 R_ERR response for non-data FIS > 0x0006 2 0 R_ERR response for device-to-host non-data FIS > 0x0007 2 0 R_ERR response for host-to-device non-data FIS > 0x0008 2 0 Device-to-host non-data FIS retries > 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy > 0x000a 2 5 Device-to-host register FISes sent due to a COMRESET > 0x000b 2 0 CRC errors within host-to-device FIS > 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC > 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC > 0x8000 4 5741 Vendor specific > ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
