smartctl 5.43 2012-06-30 r3573 [i686-w64-mingw32-xp-sp3] (sf-5.43-1)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HM120IC
Serial Number: S0CJJD0P306849
Firmware Version: AN100-16
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Wed Sep 05 21:28:19 2012 WS
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4068) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 67) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 253 253 025 Pre-fail Always
- 3072
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always
- 3785
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000e 253 253 000 Old_age Always
- 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 295725
10 Spin_Retry_Count 0x0032 253 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0012 100 100 000 Old_age Always
- 5
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 1914
187 Reported_Uncorrect 0x0032 253 253 000 Old_age Always
- 0
188 Command_Timeout 0x0032 253 253 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 059 050 040 Old_age Always
- 41 (Min/Max 10/50)
191 G-Sense_Error_Rate 0x0012 098 098 000 Old_age Always
- 24626
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always
- 76
193 Load_Cycle_Count 0x0012 090 090 000 Old_age Always
- 107841
194 Temperature_Celsius 0x0022 059 050 000 Old_age Always
- 41 (Min/Max 10/50)
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 731181
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x0012 253 253 000 Old_age Always
- 0
223 Load_Retry_Count 0x0012 100 100 000 Old_age Always
- 5
225 Load_Cycle_Count 0x0012 090 090 000 Old_age Always
- 107841
255 Unknown_Attribute 0x000a 253 100 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 2464 -
# 2 Short offline Completed without error 00% 2463 -
# 3 Short offline Completed without error 00% 2322 -
Note: selective self-test log revision number (0) not 1 implies that no
selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
