Hello,
Some of the attributes smartctl shows for SanDisk Extreme SSD
( http://www.sandisk.com/products/ssd/sata/extreme/ ) are incorrect.
I'm attaching a CSV output of SanDisk SSD Toolkit with the correct
attribute names, as well as "smartctl -a" and "smartctl -x" outputs
(using smartmontools-5.44-0-20120907-r3606.win32-setup.exe under
Windows 7).
Thanks,
Alexander
"Description","Value","ID","Attribute","Current Value","Threshold","Raw Value","Status"
"OS","Windows 7",,,,,,
"System Type","64",,,,,,
"OS Major Version","6",,,,,,
"OS Minor Version","1",,,,,,
"OS Build Number","7601",,,,,,
"OS CSD Version","Service Pack 1",,,,,,
"Processor (CPU)","'Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz'",,,,,,
"CPU Count","8",,,,,,
"Installed Memory (RAM)","16361",,,,,,
"Computer Name","WHATEVER-PC",,,,,,
"Model","SanDisk SDSSDX240GG25",,,,,,
"Serial Number","121562401548",,,,,,
"Firmware Revision","R201",,,,,,
"ATA Major Version","ATA8-ACS",,,,,,
"ATA Minor Version","Reserved",,,,,,
"SATA Generation","3",,,,,,
"Worldwide Naming","5001B4475944070C",,,,,,
"Supported Features","DSM (TRIM), SMART, Security, NCQ, APM",,,,,,
"","","01","Raw Read Error Rate","100","50","0","Pass"
"","","05","Retired Block Count","100","3","0","Pass"
"","","09","Power On Hours","0","0","290","N/A"
"","","0C","Device Power Cycle Count","100","0","25","N/A"
"","","AB","Program Fail Count","0","0","0","N/A"
"","","AC","Erase Fail Count","0","0","0","N/A"
"","","AE","Unexpected Power Loss Count","0","0","33","N/A"
"","","B1","Wear Range Delta","0","0","0","N/A"
"","","B5","Program Fail Count","0","0","0","N/A"
"","","B6","Erase Fail Count","0","0","0","N/A"
"","","BB","Reported Uncorrectable Errors","100","0","0","N/A"
"","","C2","Temperature","34","0","34","N/A"
"","","C3","On-the-Fly ECC Uncorrectable Error Count","120","0","0","N/A"
"","","C4","Reallocation Event Count","100","3","0","Pass"
"","","C9","Uncorrectable Soft Read Error Rate","120","0","0","N/A"
"","","CC","Soft ECC Correction Rate","120","0","0","N/A"
"","","E6","Life Curve Status","100","0","","Pass"
"","","E7","SSD Life Left","100","10","0","Pass"
"","","F1","Lifetime Writes to Host","0","0","390","N/A"
"","","F2","Lifetime Reads from Host","0","0","119","N/A"
smartctl 5.44 2012-09-06 r3606 [i686-w64-mingw32-win7(64)-sp1] (cf-20120907)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SDSSDX240GG25
Serial Number: 121562401548
LU WWN Device Id: 5 001b44 75944070c
Firmware Version: R201
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Sep 27 14:50:39 2012 GST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 050 Pre-fail Always
- 4511750
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 000 000 000 Old_age Always
- 290 (95 218 0)
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 25
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline
- 33
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline
- 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always
- 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 034 036 000 Old_age Always
- 34 (Min/Max 19/36)
195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline
- 4511750
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
201 Soft_Read_Error_Rate 0x001c 120 120 000 Old_age Offline
- 4511750
204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline
- 4511750
230 Head_Amplitude 0x0013 100 100 000 Pre-fail Always
- 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always
- 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline
- 203
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 390
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always
- 390
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always
- 119
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smartctl 5.44 2012-09-06 r3606 [i686-w64-mingw32-win7(64)-sp1] (cf-20120907)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: SanDisk SDSSDX240GG25
Serial Number: 121562401548
LU WWN Device Id: 5 001b44 75944070c
Firmware Version: R201
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Thu Sep 27 14:50:32 2012 GST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Disabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 100 100 050 - 4431055
5 Reallocated_Sector_Ct PO--CK 100 100 003 - 0
9 Power_On_Hours -O--CK 000 000 000 - 290 (68 150 0)
12 Power_Cycle_Count -O--CK 100 100 000 - 25
171 Unknown_Attribute -O--CK 000 000 000 - 0
172 Unknown_Attribute -O--CK 000 000 000 - 0
174 Unknown_Attribute ----CK 000 000 000 - 33
177 Wear_Leveling_Count ------ 000 000 000 - 0
181 Program_Fail_Cnt_Total -O--CK 000 000 000 - 0
182 Erase_Fail_Count_Total -O--CK 000 000 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 034 036 000 - 34 (Min/Max 19/36)
195 Hardware_ECC_Recovered --SRC- 120 120 000 - 4431055
196 Reallocated_Event_Count PO--CK 100 100 003 - 0
201 Soft_Read_Error_Rate --SRC- 120 120 000 - 4431055
204 Soft_ECC_Correction --SRC- 120 120 000 - 4431055
230 Head_Amplitude PO--C- 100 100 000 - 100
231 Temperature_Celsius PO--C- 100 100 010 - 0
233 Media_Wearout_Indicator ------ 000 000 000 - 203
234 Unknown_Attribute -O--CK 000 000 000 - 390
241 Total_LBAs_Written -O--CK 000 000 000 - 390
242 Total_LBAs_Read -O--CK 000 000 000 - 119
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xb7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
SMART Error Log not supported
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Error unknown SCT Temperature History Format Version (10), should be 2.
Warning: device does not support SCT Error Recovery Control command
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 5 Device-to-host register FISes sent due to a COMRESET
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://ad.doubleclick.net/clk;258768047;13503038;j?
http://info.appdynamics.com/FreeJavaPerformanceDownload.html
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
