New drive to add - WDC WD20EZRX-00DC0B0  (Green series)

Cheers,


Alexander Rikmanis
mailto: rikma...@gmail.com

[image: View my profile on LinkedIn] <http://nz.linkedin.com/in/rikmanis>
smartctl 5.41 2011-06-09 r3365 [i686-linux-2.6.32-5-686-bigmem] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD20EZRX-00DC0B0
Serial Number:    WD-WMC1T2225451
LU WWN Device Id: 5 0014ee 6adc3aee2
Firmware Version: 80.00A80
User Capacity:    2 000 398 934 016 bytes [2,00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   9
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Jan 30 13:10:03 2013 NZDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (27360) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off 
support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 255) minutes.
Conveyance self-test routine
recommended polling time:        (   5) minutes.
SCT capabilities:              (0x70b5) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   200   200   051    -    2
  3 Spin_Up_Time            POS--K   187   182   021    -    5633
  4 Start_Stop_Count        -O--CK   100   100   000    -    15
  5 Reallocated_Sector_Ct   PO--CK   200   200   140    -    0
  7 Seek_Error_Rate         -OSR-K   200   200   000    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    37
 10 Spin_Retry_Count        -O--CK   100   253   000    -    0
 11 Calibration_Retry_Count -O--CK   100   253   000    -    0
 12 Power_Cycle_Count       -O--CK   100   100   000    -    9
192 Power-Off_Retract_Count -O--CK   200   200   000    -    7
193 Load_Cycle_Count        -O--CK   200   200   000    -    158
194 Temperature_Celsius     -O---K   110   109   000    -    40
196 Reallocated_Event_Count -O--CK   200   200   000    -    0
197 Current_Pending_Sector  -O--CK   200   200   000    -    0
198 Offline_Uncorrectable   ----CK   100   253   000    -    0
199 UDMA_CRC_Error_Count    -O--CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   ---R--   100   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    5 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    6 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xa0 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa1 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa2 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa3 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa4 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa5 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa6 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xa8 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xa9 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xaa has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xab has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xac has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xad has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xae has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xaf has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb1 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb2 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb3 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb4 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb5 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb6 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xb7 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xbd has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xc0 has    1 sectors [Device vendor specific log]
GP    Log at address 0xc1 has   93 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%        37         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       258 (0x0102)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    40 Celsius
Power Cycle Min/Max Temperature:     28/41 Celsius
Lifetime    Min/Max Temperature:     26/41 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        1 minute
Min/Max recommended Temperature:      0/60 Celsius
Min/Max Temperature Limit:           -41/85 Celsius
Temperature History Size (Index):    478 (340)

Index    Estimated Time   Temperature Celsius
 341    2013-01-30 05:13    32  *************
 ...    ..( 13 skipped).    ..  *************
 355    2013-01-30 05:27    32  *************
 356    2013-01-30 05:28    31  ************
 ...    ..( 52 skipped).    ..  ************
 409    2013-01-30 06:21    31  ************
 410    2013-01-30 06:22     ?  -
 411    2013-01-30 06:23    31  ************
 ...    ..(  7 skipped).    ..  ************
 419    2013-01-30 06:31    31  ************
 420    2013-01-30 06:32    32  *************
 ...    ..(  4 skipped).    ..  *************
 425    2013-01-30 06:37    32  *************
 426    2013-01-30 06:38    33  **************
 ...    ..(  6 skipped).    ..  **************
 433    2013-01-30 06:45    33  **************
 434    2013-01-30 06:46    34  ***************
 ...    ..(  9 skipped).    ..  ***************
 444    2013-01-30 06:56    34  ***************
 445    2013-01-30 06:57    35  ****************
 ...    ..( 16 skipped).    ..  ****************
 462    2013-01-30 07:14    35  ****************
 463    2013-01-30 07:15    36  *****************
 ...    ..( 39 skipped).    ..  *****************
  25    2013-01-30 07:55    36  *****************
  26    2013-01-30 07:56    37  ******************
 ...    ..(  3 skipped).    ..  ******************
  30    2013-01-30 08:00    37  ******************
  31    2013-01-30 08:01    36  *****************
 ...    ..(  3 skipped).    ..  *****************
  35    2013-01-30 08:05    36  *****************
  36    2013-01-30 08:06    35  ****************
 ...    ..(  7 skipped).    ..  ****************
  44    2013-01-30 08:14    35  ****************
  45    2013-01-30 08:15    34  ***************
 ...    ..( 10 skipped).    ..  ***************
  56    2013-01-30 08:26    34  ***************
  57    2013-01-30 08:27    33  **************
 ...    ..( 16 skipped).    ..  **************
  74    2013-01-30 08:44    33  **************
  75    2013-01-30 08:45    32  *************
 ...    ..(102 skipped).    ..  *************
 178    2013-01-30 10:28    32  *************
 179    2013-01-30 10:29     ?  -
 180    2013-01-30 10:30    32  *************
 181    2013-01-30 10:31    32  *************
 182    2013-01-30 10:32    32  *************
 183    2013-01-30 10:33    33  **************
 ...    ..(  3 skipped).    ..  **************
 187    2013-01-30 10:37    33  **************
 188    2013-01-30 10:38    34  ***************
 189    2013-01-30 10:39    34  ***************
 190    2013-01-30 10:40    34  ***************
 191    2013-01-30 10:41    35  ****************
 192    2013-01-30 10:42    35  ****************
 193    2013-01-30 10:43    35  ****************
 194    2013-01-30 10:44    36  *****************
 ...    ..(  5 skipped).    ..  *****************
 200    2013-01-30 10:50    36  *****************
 201    2013-01-30 10:51    37  ******************
 ...    ..(  2 skipped).    ..  ******************
 204    2013-01-30 10:54    37  ******************
 205    2013-01-30 10:55    38  *******************
 ...    ..(  6 skipped).    ..  *******************
 212    2013-01-30 11:02    38  *******************
 213    2013-01-30 11:03    39  ********************
 ...    ..(  8 skipped).    ..  ********************
 222    2013-01-30 11:12    39  ********************
 223    2013-01-30 11:13    40  *********************
 ...    ..( 37 skipped).    ..  *********************
 261    2013-01-30 11:51    40  *********************
 262    2013-01-30 11:52    41  **********************
 ...    ..( 10 skipped).    ..  **********************
 273    2013-01-30 12:03    41  **********************
 274    2013-01-30 12:04    40  *********************
 ...    ..( 20 skipped).    ..  *********************
 295    2013-01-30 12:25    40  *********************
 296    2013-01-30 12:26    41  **********************
 297    2013-01-30 12:27    40  *********************
 ...    ..(  4 skipped).    ..  *********************
 302    2013-01-30 12:32    40  *********************
 303    2013-01-30 12:33    39  ********************
 ...    ..(  3 skipped).    ..  ********************
 307    2013-01-30 12:37    39  ********************
 308    2013-01-30 12:38    40  *********************
 ...    ..( 17 skipped).    ..  *********************
 326    2013-01-30 12:56    40  *********************
 327    2013-01-30 12:57    39  ********************
 ...    ..(  8 skipped).    ..  ********************
 336    2013-01-30 13:06    39  ********************
 337    2013-01-30 13:07    40  *********************
 ...    ..(  2 skipped).    ..  *********************
 340    2013-01-30 13:10    40  *********************

Warning: device does not support SCT Error Recovery Control command
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            4  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x8000  4       130505  Vendor specific

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to