Samsung ST320LM001 HN-M320MBB

Hi all,
this disk is missing in the database.

Kind regards,
T.N. Peredur

smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.7.4-gentoo] (local build)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     ST320LM001 HN-M320MBB
Serial Number:    S2R6J9AC408669
LU WWN Device Id: 5 0004cf 207627400
Firmware Version: 2AR10002
User Capacity:    320.072.933.376 bytes [320 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    5400 rpm
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ATA8-ACS T13/1699-D revision 6
SATA Version is:  SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Mon Feb  4 15:36:40 2013 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is:     254 (maximum performance), recommended: 254
APM feature is:   Disabled
Rd look-ahead is: Enabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 3780) seconds.
Offline data collection
capabilities:  (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities:            (0x0003)Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability:        (0x01)Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time:  (   2) minutes.
Extended self-test routine
recommended polling time:  (  63) minutes.
SCT capabilities:        (0x003f)SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR-K   100   100   051    -    0
  2 Throughput_Performance  -OS--K   252   252   000    -    0
  3 Spin_Up_Time            PO---K   091   091   025    -    2855
  4 Start_Stop_Count        -O--CK   095   095   000    -    5922
  5 Reallocated_Sector_Ct   PO--CK   252   252   010    -    0
  7 Seek_Error_Rate         -OSR-K   252   252   051    -    0
  8 Seek_Time_Performance   --S--K   252   252   015    -    0
  9 Power_On_Hours          -O--CK   100   100   000    -    1073
 10 Spin_Retry_Count        -O--CK   252   252   051    -    0
 11 Calibration_Retry_Count -O--CK   100   100   000    -    3
 12 Power_Cycle_Count       -O--CK   100   100   000    -    270
191 G-Sense_Error_Rate      -O---K   252   252   000    -    0
192 Power-Off_Retract_Count -O---K   252   252   000    -    0
194 Temperature_Celsius     -O----   057   048   000    -    43 (Min/Max 18/52)
195 Hardware_ECC_Recovered  -O-RCK   100   100   000    -    0
196 Reallocated_Event_Count -O--CK   252   252   000    -    0
197 Current_Pending_Sector  -O--CK   252   252   000    -    0
198 Offline_Uncorrectable   ----CK   252   252   000    -    0
199 UDMA_CRC_Error_Count    -OS-CK   200   200   000    -    0
200 Multi_Zone_Error_Rate   -O-R-K   100   100   000    -    987
223 Load_Retry_Count        -O--CK   100   100   000    -    3
225 Load_Cycle_Count        -O--CK   097   097   000    -    39468
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    2 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    2 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    2 sectors [Extended self-test log]
GP    Log at address 0x08 has    2 sectors [Power Conditions log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error log]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xc0 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc1 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc2 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc3 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc4 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc5 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc6 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc8 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xc9 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xca has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcb has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcc has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcd has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xce has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xcf has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd0 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd1 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd2 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd3 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd4 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd5 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd6 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd8 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xd9 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xda has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdb has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdc has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdd has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xde has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xdf has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (2 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been 
run
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Completed [00% left] (0-65535)
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  2
SCT Version (vendor specific):       256 (0x0100)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    43 Celsius
Power Cycle Min/Max Temperature:     21/43 Celsius
Lifetime    Min/Max Temperature:     18/52 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         5 minutes
Temperature Logging Interval:        5 minutes
Min/Max recommended Temperature:     -5/80 Celsius
Min/Max Temperature Limit:           -10/85 Celsius
Temperature History Size (Index):    128 (4)

Index    Estimated Time   Temperature Celsius
   5    2013-02-04 05:00    43  ************************
   6    2013-02-04 05:05    35  ****************
   7    2013-02-04 05:10    37  ******************
   8    2013-02-04 05:15    38  *******************
   9    2013-02-04 05:20    39  ********************
  10    2013-02-04 05:25    40  *********************
  11    2013-02-04 05:30    41  **********************
  12    2013-02-04 05:35    42  ***********************
  13    2013-02-04 05:40    42  ***********************
  14    2013-02-04 05:45    43  ************************
  15    2013-02-04 05:50    43  ************************
  16    2013-02-04 05:55    44  *************************
 ...    ..(  5 skipped).    ..  *************************
  22    2013-02-04 06:25    44  *************************
  23    2013-02-04 06:30    45  **************************
 ...    ..( 10 skipped).    ..  **************************
  34    2013-02-04 07:25    45  **************************
  35    2013-02-04 07:30    46  ***************************
 ...    ..(  3 skipped).    ..  ***************************
  39    2013-02-04 07:50    46  ***************************
  40    2013-02-04 07:55    45  **************************
 ...    ..(  8 skipped).    ..  **************************
  49    2013-02-04 08:40    45  **************************
  50    2013-02-04 08:45    24  *****
  51    2013-02-04 08:50    26  *******
  52    2013-02-04 08:55    28  *********
  53    2013-02-04 09:00    31  ************
  54    2013-02-04 09:05    33  **************
  55    2013-02-04 09:10    35  ****************
  56    2013-02-04 09:15    36  *****************
  57    2013-02-04 09:20    37  ******************
  58    2013-02-04 09:25    38  *******************
  59    2013-02-04 09:30    39  ********************
  60    2013-02-04 09:35    39  ********************
  61    2013-02-04 09:40    40  *********************
  62    2013-02-04 09:45    41  **********************
  63    2013-02-04 09:50    41  **********************
  64    2013-02-04 09:55    42  ***********************
 ...    ..(  2 skipped).    ..  ***********************
  67    2013-02-04 10:10    42  ***********************
  68    2013-02-04 10:15    43  ************************
 ...    ..(  3 skipped).    ..  ************************
  72    2013-02-04 10:35    43  ************************
  73    2013-02-04 10:40    24  *****
  74    2013-02-04 10:45    27  ********
  75    2013-02-04 10:50    29  **********
  76    2013-02-04 10:55    30  ***********
  77    2013-02-04 11:00    33  **************
  78    2013-02-04 11:05    35  ****************
  79    2013-02-04 11:10    37  ******************
  80    2013-02-04 11:15    37  ******************
  81    2013-02-04 11:20    39  ********************
  82    2013-02-04 11:25    39  ********************
  83    2013-02-04 11:30    40  *********************
  84    2013-02-04 11:35    40  *********************
  85    2013-02-04 11:40    41  **********************
  86    2013-02-04 11:45    41  **********************
  87    2013-02-04 11:50    42  ***********************
 ...    ..(  4 skipped).    ..  ***********************
  92    2013-02-04 12:15    42  ***********************
  93    2013-02-04 12:20    43  ************************
 ...    ..( 38 skipped).    ..  ************************
   4    2013-02-04 15:35    43  ************************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  4            0  Command failed due to ICRC error
0x0002  4            0  R_ERR response for data FIS
0x0003  4            0  R_ERR response for device-to-host data FIS
0x0004  4            0  R_ERR response for host-to-device data FIS
0x0005  4            0  R_ERR response for non-data FIS
0x0006  4            0  R_ERR response for device-to-host non-data FIS
0x0007  4            0  R_ERR response for host-to-device non-data FIS
0x0008  4            0  Device-to-host non-data FIS retries
0x0009  4            3  Transition from drive PhyRdy to drive PhyNRdy
0x000a  4            1  Device-to-host register FISes sent due to a COMRESET
0x000b  4            0  CRC errors within host-to-device FIS
0x000d  4            0  Non-CRC errors within host-to-device FIS
0x000f  4            0  R_ERR response for host-to-device data FIS, CRC
0x0010  4            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  4            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  4            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00  4            0  Vendor specific
0x8e01  4            0  Vendor specific
0x8e02  4            0  Vendor specific
0x8e03  4            0  Vendor specific
0x8e04  4            0  Vendor specific
0x8e05  4            0  Vendor specific
0x8e06  4            0  Vendor specific
0x8e07  4            0  Vendor specific
0x8e08  4            0  Vendor specific
0x8e09  4            0  Vendor specific
0x8e0a  4            0  Vendor specific
0x8e0b  4            0  Vendor specific
0x8e0c  4            0  Vendor specific
0x8e0d  4            0  Vendor specific
0x8e0e  4            0  Vendor specific
0x8e0f  4            0  Vendor specific
0x8e10  4            0  Vendor specific
0x8e11  4            0  Vendor specific

------------------------------------------------------------------------------
Everyone hates slow websites. So do we.
Make your web apps faster with AppDynamics
Download AppDynamics Lite for free today:
http://p.sf.net/sfu/appdyn_d2d_jan
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to