--
Ivan Tiukov (www.tiukov.com)
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-29-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: M4-CT256M4SSD3
Firmware Version: 07MH
User Capacity: 256 060 514 304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Aug 30 11:15:40 2013 FET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 243) Self-test routine in progress...
30% of test remaining.
Total time to complete Offline
data collection: ( 1190) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 19) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 001 - 271
12 Power_Cycle_Count -O--CK 100 100 001 - 129
170 Unknown_Attribute PO--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 001 - 0
172 Unknown_Attribute -O--CK 100 100 001 - 0
173 Unknown_Attribute PO--CK 100 100 010 - 3
174 Unknown_Attribute -O--CK 100 100 001 - 9
181 Program_Fail_Cnt_Total -O---K 100 100 001 - 81604706318
183 Runtime_Bad_Block -O--CK 100 100 001 - 0
184 End-to-End_Error PO--CK 100 100 050 - 0
187 Reported_Uncorrect -O--CK 100 100 001 - 0
188 Command_Timeout -O--CK 100 100 001 - 0
189 High_Fly_Writes -OSR-- 100 100 001 - 102
194 Temperature_Celsius -O---K 100 100 000 - 0
195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 0
196 Reallocated_Event_Count -O--CK 100 100 001 - 0
197 Current_Pending_Sector -O--CK 100 100 001 - 0
198 Offline_Uncorrectable ----CK 100 100 001 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0
202 Data_Address_Mark_Errs ---RC- 100 100 001 - 0
206 Flying_Height -OSR-- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 16383 sectors [Ext. Comprehensive SMART error log]
GP/S Log at address 0x04 has 255 sectors [Device Statistics log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 3449 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP Log at address 0xa0 has 2000 sectors [Device vendor specific log]
SMART Log at address 0xa0 has 208 sectors [Device vendor specific log]
GP/S Log at address 0xa1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xba has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbb has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbc has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbe has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbf has 1 sectors [Device vendor specific log]
GP Log at address 0xc0 has 80 sectors [Device vendor specific log]
GP/S Log at address 0xc1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xca has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcb has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcc has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xce has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xda has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdb has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdc has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xde has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log size 16383 not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log size 3449 not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 271 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Self_test_in_progress [30% left] (26375400-26440935)
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: DST executing in background (3)
Current Temperature: 0 Celsius
Power Cycle Max Temperature: 0 Celsius
Lifetime Max Temperature: 0 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: -5/75 Celsius
Temperature History Size (Index): 478 (136)
Index Estimated Time Temperature Celsius
137 2013-08-27 03:40 ? -
... ..(469 skipped). .. -
129 2013-08-30 10:00 ? -
130 2013-08-30 10:10 0 -
... ..( 5 skipped). .. -
136 2013-08-30 11:10 0 -
SCT Error Recovery Control:
Read: 40 (4,0 seconds)
Write: 40 (4,0 seconds)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-29-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Can't start self-test without aborting current test (50% remaining),
add '-t force' option to override, or run 'smartctl -X' to abort test.
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-29-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: M4-CT256M4SSD3
Serial Number: 000000001311036F3682
LU WWN Device Id: 5 00a075 1036f3682
Firmware Version: 07MH
User Capacity: 256 060 514 304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Fri Aug 30 11:15:30 2013 FET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 244) Self-test routine in progress...
40% of test remaining.
Total time to complete Offline
data collection: ( 1190) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 19) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 050 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 100 100 001 - 271
12 Power_Cycle_Count -O--CK 100 100 001 - 129
170 Unknown_Attribute PO--CK 100 100 010 - 0
171 Unknown_Attribute -O--CK 100 100 001 - 0
172 Unknown_Attribute -O--CK 100 100 001 - 0
173 Unknown_Attribute PO--CK 100 100 010 - 3
174 Unknown_Attribute -O--CK 100 100 001 - 9
181 Program_Fail_Cnt_Total -O---K 100 100 001 - 81604706318
183 Runtime_Bad_Block -O--CK 100 100 001 - 0
184 End-to-End_Error PO--CK 100 100 050 - 0
187 Reported_Uncorrect -O--CK 100 100 001 - 0
188 Command_Timeout -O--CK 100 100 001 - 0
189 High_Fly_Writes -OSR-- 100 100 001 - 102
194 Temperature_Celsius -O---K 100 100 000 - 0
195 Hardware_ECC_Recovered -O-RCK 100 100 001 - 0
196 Reallocated_Event_Count -O--CK 100 100 001 - 0
197 Current_Pending_Sector -O--CK 100 100 001 - 0
198 Offline_Uncorrectable ----CK 100 100 001 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 001 - 0
202 Data_Address_Mark_Errs ---RC- 100 100 001 - 0
206 Flying_Height -OSR-- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 51 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 16383 sectors [Ext. Comprehensive SMART error log]
GP/S Log at address 0x04 has 255 sectors [Device Statistics log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 3449 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP Log at address 0xa0 has 2000 sectors [Device vendor specific log]
SMART Log at address 0xa0 has 208 sectors [Device vendor specific log]
GP/S Log at address 0xa1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xba has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbb has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbc has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbe has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbf has 1 sectors [Device vendor specific log]
GP Log at address 0xc0 has 80 sectors [Device vendor specific log]
GP/S Log at address 0xc1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xca has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcb has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcc has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xce has 1 sectors [Device vendor specific log]
GP/S Log at address 0xcf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xd9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xda has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdb has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdc has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xde has 1 sectors [Device vendor specific log]
GP/S Log at address 0xdf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log size 16383 not supported
SMART Error Log Version: 1
No Errors Logged
SMART Extended Self-test Log size 3449 not supported
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 271 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Self_test_in_progress [40% left] (23998536-24064071)
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 0
Device State: DST executing in background (3)
Current Temperature: 0 Celsius
Power Cycle Max Temperature: 0 Celsius
Lifetime Max Temperature: 0 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: -5/75 Celsius
Temperature History Size (Index): 478 (136)
Index Estimated Time Temperature Celsius
137 2013-08-27 03:40 ? -
... ..(469 skipped). .. -
129 2013-08-30 10:00 ? -
130 2013-08-30 10:10 0 -
... ..( 5 skipped). .. -
136 2013-08-30 11:10 0 -
SCT Error Recovery Control:
Read: 40 (4,0 seconds)
Write: 40 (4,0 seconds)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x000a 4 7 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
Learn the latest--Visual Studio 2012, SharePoint 2013, SQL 2012, more!
Discover the easy way to master current and previous Microsoft technologies
and advance your career. Get an incredible 1,500+ hours of step-by-step
tutorial videos with LearnDevNow. Subscribe today and save!
http://pubads.g.doubleclick.net/gampad/clk?id=58040911&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
