Hi!
Attached you find the output of a PNY SSD; searching around the net
I've discovered that his controller is a SandForce (in effect the
attributes table matches).
Greetings,
Sam
smartctl 6.2 2013-07-26 r3841 [i686-w64-mingw32-win7(64)-sp1] (sf-6.2-1)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SSD9SC120GEDA
Serial Number: PNY1210A00013327
LU WWN Device Id: 0 000120 000000000
Firmware Version: 334ABBF0
User Capacity: 120.034.123.776 bytes [120 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Oct 22 12:41:08 2013
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Disabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 2097) seconds.
Offline data collection
capabilities: (0x7f) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Abort Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 120 120 050 Pre-fail Always
- 0
5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 2 (219 246 0)
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 14
171 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 0
172 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 0
174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline
- 12
177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline
- 0
181 Program_Fail_Cnt_Total 0x0032 000 000 000 Old_age Always
- 0
182 Erase_Fail_Count_Total 0x0032 000 000 000 Old_age Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
194 Temperature_Celsius 0x0022 025 035 000 Old_age Always
- 25 (Min/Max 19/35)
195 Hardware_ECC_Recovered 0x001c 100 100 000 Old_age Offline
- 0
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always
- 0
201 Unknown_SSD_Attribute 0x001c 100 100 000 Old_age Offline
- 0
204 Soft_ECC_Correction 0x001c 100 100 000 Old_age Offline
- 0
230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always
- 100
231 Temperature_Celsius 0x0013 100 100 010 Pre-fail Always
- 0
233 Media_Wearout_Indicator 0x0000 000 000 000 Old_age Offline
- 26
234 Unknown_Attribute 0x0032 000 000 000 Old_age Always
- 38
241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always
- 38
242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always
- 10
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.------------------------------------------------------------------------------
November Webinars for C, C++, Fortran Developers
Accelerate application performance with scalable programming models. Explore
techniques for threading, error checking, porting, and tuning. Get the most
from the latest Intel processors and coprocessors. See abstracts and register
http://pubads.g.doubleclick.net/gampad/clk?id=60136231&iu=/4140/ostg.clktrk
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
