**
This email and any attachments may contain information that is confidential
and/or privileged for the sole use of the intended recipient. Any use, review,
disclosure, copying, distribution or reliance by others, and any forwarding of
this email or its contents, without the express permission of the sender is
strictly prohibited by law. If you are not the intended recipient, please
contact the sender immediately, delete the e-mail and destroy all copies.
**
smartctl 6.2 2013-07-26 r3841 [i686-w64-mingw32-win7-sp1] (sf-6.2-1)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Hitachi HDS721025CLA682
Serial Number: JP0372J40ZT92M
LU WWN Device Id: 5 000cca 379cdfe53
Firmware Version: JP1OA41A
User Capacity: 250,059,350,016 bytes [250 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Mar 11 10:46:58 2014 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Disabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
Drive failure expected in less than 24 hours. SAVE ALL DATA.
See vendor-specific Attribute list for failed Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting
command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 73) The previous self-test completed having
a test element that failed and the test
element that failed is not known.
Total time to complete Offline
data collection: ( 2429) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 41) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 073 057 016 - 201195525
2 Throughput_Performance POS--K 135 100 054 - 98
3 Spin_Up_Time PO---K 135 100 024 - 169 (Average 170)
4 Start_Stop_Count -O---K 100 100 000 - 35
5 Reallocated_Sector_Ct PO--CK 001 001 005 NOW 686 (0 660)
7 Seek_Error_Rate POSR-K 100 100 067 - 0
8 Seek_Time_Performance P-S--K 142 100 020 - 29
9 Power_On_Hours -O--CK 098 098 000 - 20706
10 Spin_Retry_Count PO--CK 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 30
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
185 Unknown_Attribute -O--CK 001 001 000 - 16777215
187 Reported_Uncorrect -O--CK 100 100 000 - 718864384
188 Command_Timeout -O--CK 100 050 000 - 1434853967552
189 High_Fly_Writes -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 069 056 000 - 31 (Min/Max 20/42)
192 Power-Off_Retract_Count -O--CK 100 100 000 - 35
193 Load_Cycle_Count -O--CK 100 100 000 - 35
194 Temperature_Celsius -O---- 193 142 000 - 31 (Min/Max 18/44)
196 Reallocated_Event_Count -O--CK 072 072 000 - 686
197 Current_Pending_Sector -O--CK 009 009 000 - 1817
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
Device Error Count: 487 (device log contains only the most recent 4 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 487 [2] occurred at disk power-on lifetime: 20532 hours (855 days + 12
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 15 dd 1d 10 05 00 Error: UNC at LBA = 0x15dd1d10 =
366812432
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 18 00 c0 00 00 15 dd 1d 00 40 00 2d+03:50:29.254 READ FPDMA QUEUED
60 01 00 00 b8 00 00 0e 9d d0 18 40 00 2d+03:50:29.123 READ FPDMA QUEUED
60 00 40 00 b0 00 00 00 31 c1 70 40 00 2d+03:50:29.121 READ FPDMA QUEUED
61 00 80 00 a8 00 00 00 39 db a0 40 00 2d+03:50:27.304 WRITE FPDMA QUEUED
60 00 08 00 a0 00 00 15 dd 1b 30 40 00 2d+03:50:27.231 READ FPDMA QUEUED
Error 486 [1] occurred at disk power-on lifetime: 20124 hours (838 days + 12
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 76 00 00 16 5f 5b ea 06 00 Error: WP at LBA = 0x165f5bea =
375348202
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 01 00 b0 00 00 00 1f 5d 80 40 00 47d+09:37:33.585 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 00 39 4a d8 40 00 47d+09:37:33.585 WRITE FPDMA QUEUED
61 00 14 00 a0 00 00 00 d3 df 48 40 00 47d+09:37:33.585 WRITE FPDMA QUEUED
60 00 80 00 98 00 00 16 5f 62 60 40 00 47d+09:37:33.585 READ FPDMA QUEUED
60 00 80 00 90 00 00 16 5f 61 e0 40 00 47d+09:37:33.584 READ FPDMA QUEUED
Error 485 [0] occurred at disk power-on lifetime: 20124 hours (838 days + 12
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 76 00 00 16 5f 5b ea 06 00 Error: WP at LBA = 0x165f5bea =
375348202
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 01 00 b0 00 00 00 1f 5d 80 40 00 47d+09:37:04.261 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 00 39 4a d8 40 00 47d+09:37:04.261 WRITE FPDMA QUEUED
61 00 14 00 a0 00 00 00 d3 df 48 40 00 47d+09:37:04.260 WRITE FPDMA QUEUED
60 00 80 00 98 00 00 16 5f 62 60 40 00 47d+09:37:04.260 READ FPDMA QUEUED
60 00 80 00 90 00 00 16 5f 61 e0 40 00 47d+09:37:04.259 READ FPDMA QUEUED
Error 484 [3] occurred at disk power-on lifetime: 20124 hours (838 days + 12
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 70 00 00 16 5f 5b f0 06 00 Error: WP at LBA = 0x165f5bf0 =
375348208
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 01 00 b0 00 00 00 1f 5d 80 40 00 47d+09:36:14.941 WRITE FPDMA QUEUED
61 00 08 00 a8 00 00 00 39 4a d8 40 00 47d+09:36:14.941 WRITE FPDMA QUEUED
61 00 14 00 a0 00 00 00 d3 df 48 40 00 47d+09:36:14.940 WRITE FPDMA QUEUED
60 00 80 00 98 00 00 16 5f 62 60 40 00 47d+09:36:14.940 READ FPDMA QUEUED
60 00 80 00 90 00 00 16 5f 61 e0 40 00 47d+09:36:14.939 READ FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: unknown failure 90% 20706 0
# 2 Extended offline Interrupted (host reset) 80% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: SMART Off-line Data Collection executing
in background (4)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 20/42 Celsius
Lifetime Min/Max Temperature: 18/44 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (58)
Index Estimated Time Temperature Celsius
59 2014-03-11 08:39 31 ************
... ..(126 skipped). .. ************
58 2014-03-11 10:46 31 ************
SCT Error Recovery Control:
Read: 85 (8.5 seconds)
Write: 85 (8.5 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 1) ==
1 0x008 4 30 Lifetime Power-On Resets
1 0x010 4 20706 Power-on Hours
1 0x018 6 4384845239 Logical Sectors Written
1 0x020 6 98040664 Number of Write Commands
1 0x028 6 15034551615 Logical Sectors Read
1 0x030 6 138122688 Number of Read Commands
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 20702 Spindle Motor Power-on Hours
3 0x010 4 20702 Head Flying Hours
3 0x018 4 35 Head Load Events
3 0x020 4 2015 Number of Reallocated Logical Sectors
3 0x028 4 660439 Read Recovery Attempts
3 0x030 4 2 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 1728 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 31 Current Temperature
5 0x010 1 34~ Average Short Term Temperature
5 0x018 1 29~ Average Long Term Temperature
5 0x020 1 44 Highest Temperature
5 0x028 1 18 Lowest Temperature
5 0x030 1 39~ Highest Average Short Term Temperature
5 0x038 1 0~ Lowest Average Short Term Temperature
5 0x040 1 35~ Highest Average Long Term Temperature
5 0x048 1 0~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 4511 Number of Hardware Resets
6 0x010 4 2616 Number of ASR Events
6 0x018 4 0 Number of Interface CRC Errors
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0009 2 589 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 586 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
------------------------------------------------------------------------------
Learn Graph Databases - Download FREE O'Reilly Book
"Graph Databases" is the definitive new guide to graph databases and their
applications. Written by three acclaimed leaders in the field,
this first edition is now available. Download your free book today!
http://p.sf.net/sfu/13534_NeoTech
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
