Hi,
The the FreeAgent GoFlex Pro for Mac USB Drive (USB id 0bc2:6121) is currently
not in the database.
It works with smartctl when using the '-d sat’ option.
Output of lsusb and smartctl attached.
Best regards
Steve
-----
Bus 001 Device 006: ID 0bc2:6121 Seagate RSS LLC
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bc2 Seagate RSS LLC
idProduct 0x6121
bcdDevice 1.48
iManufacturer 1
iProduct 2
iSerial 3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.16.0-23-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sdb: Unknown USB bridge [0x0bc2:0x6121 (0x148)]
Please specify device type with the -d option.
Use smartctl -h to get a usage summary
smartctl 6.2 2013-07-26 r3841 [i686-linux-3.16.0-23-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 7200.5
Device Model: ST9500424AS
Serial Number: XXXXXXXX
LU WWN Device Id: 5 XXXXXX XXXXXXXXX
Firmware Version: 0001BSM1
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Sat Oct 25 16:28:28 2014 BST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) XXX Error Recovery Control Command failed: scsi error medium or
hardware error (serious)
Wt Cache Reorder: N/A
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x73) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 112) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 119 100 006 - 222534088
3 Spin_Up_Time PO---- 100 100 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 53
5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
7 Seek_Error_Rate POSR-- 100 253 030 - 281190
9 Power_On_Hours -O--CK 100 100 000 - 29
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 22
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 094 000 - 850416500934
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 071 046 045 - 29 (Min/Max 19/29)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
193 Load_Cycle_Count -O--CK 100 100 000 - 120
194 Temperature_Celsius -O---K 029 054 000 - 29 (0 18 0 0 0)
195 Hardware_ECC_Recovered -O-RC- 119 100 000 - 222534088
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
240 Head_Flying_Hours ------ 100 253 000 - 10960756539408
241 Total_LBAs_Written ------ 100 253 000 - 1984476103
242 Total_LBAs_Read ------ 100 253 000 - 1593378855
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 20 Device vendor specific log
0xa2 GPL VS 2248 Device vendor specific log
0xa8 GPL,SL VS 65 Device vendor specific log
0xa9 GPL,SL VS 1 Device vendor specific log
0xab GPL VS 1 Device vendor specific log
0xae GPL VS 1 Device vendor specific log
0xb0 GPL VS 2864 Device vendor specific log
0xbd GPL VS 252 Device vendor specific log
0xbe-0xbf GPL VS 65535 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 29 Celsius
Power Cycle Min/Max Temperature: 19/29 Celsius
Lifetime Min/Max Temperature: 18/55 Celsius
Lifetime Average Temperature: 41 Celsius
Under/Over Temperature Limit Count: 0/8
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/ 0 Celsius
Min/Max Temperature Limit: 0/ 0 Celsius
Temperature History Size (Index): 128 (11)
Index Estimated Time Temperature Celsius
12 2014-10-25 14:21 54 ***********************************
... ..( 26 skipped). .. ***********************************
39 2014-10-25 14:48 54 ***********************************
40 2014-10-25 14:49 55 ************************************
... ..( 12 skipped). .. ************************************
53 2014-10-25 15:02 55 ************************************
54 2014-10-25 15:03 54 ***********************************
... ..( 27 skipped). .. ***********************************
82 2014-10-25 15:31 54 ***********************************
83 2014-10-25 15:32 ? -
84 2014-10-25 15:33 23 ****
85 2014-10-25 15:34 ? -
86 2014-10-25 15:35 21 **
87 2014-10-25 15:36 ? -
88 2014-10-25 15:37 20 *
89 2014-10-25 15:38 ? -
90 2014-10-25 15:39 20 *
91 2014-10-25 15:40 21 **
92 2014-10-25 15:41 22 ***
93 2014-10-25 15:42 ? -
94 2014-10-25 15:43 23 ****
95 2014-10-25 15:44 24 *****
96 2014-10-25 15:45 26 *******
97 2014-10-25 15:46 ? -
98 2014-10-25 15:47 25 ******
99 2014-10-25 15:48 ? -
100 2014-10-25 15:49 18 -
101 2014-10-25 15:50 20 *
102 2014-10-25 15:51 21 **
103 2014-10-25 15:52 23 ****
104 2014-10-25 15:53 23 ****
105 2014-10-25 15:54 24 *****
106 2014-10-25 15:55 25 ******
107 2014-10-25 15:56 26 *******
108 2014-10-25 15:57 ? -
109 2014-10-25 15:58 20 *
110 2014-10-25 15:59 21 **
111 2014-10-25 16:00 22 ***
112 2014-10-25 16:01 24 *****
113 2014-10-25 16:02 25 ******
114 2014-10-25 16:03 27 ********
115 2014-10-25 16:04 27 ********
116 2014-10-25 16:05 28 *********
117 2014-10-25 16:06 29 **********
118 2014-10-25 16:07 29 **********
119 2014-10-25 16:08 ? -
120 2014-10-25 16:09 20 *
121 2014-10-25 16:10 21 **
122 2014-10-25 16:11 22 ***
123 2014-10-25 16:12 24 *****
124 2014-10-25 16:13 25 ******
125 2014-10-25 16:14 26 *******
126 2014-10-25 16:15 27 ********
127 2014-10-25 16:16 28 *********
0 2014-10-25 16:17 28 *********
1 2014-10-25 16:18 ? -
2 2014-10-25 16:19 23 ****
3 2014-10-25 16:20 ? -
4 2014-10-25 16:21 19 -
5 2014-10-25 16:22 20 *
6 2014-10-25 16:23 25 ******
7 2014-10-25 16:24 28 *********
8 2014-10-25 16:25 28 *********
9 2014-10-25 16:26 29 **********
10 2014-10-25 16:27 29 **********
11 2014-10-25 16:28 29 **********
Write SCT (Get) Error Recovery Control Command failed: scsi error medium or
hardware error (serious)
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
