smartctl 6.3 2014-07-26 r3976 [FreeBSD 10.1-RELEASE-p1 amd64] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: Samsung SSD 850 PRO 1TB
Firmware Version: EXM01B6Q
User Capacity: 1,024,209,543,168 bytes [1.02 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4c
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Jan 22 00:15:35 2015 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Unexpected SCT status 0x0001 (action_code=4, function_code=2)
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers
missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine
completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 66) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 96
12 Power_Cycle_Count -O--CK 099 099 000 - 13
177 Wear_Leveling_Count PO--C- 100 100 000 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 069 059 000 - 31
195 Hardware_ECC_Recovered -O-RC- 200 200 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
235 Unknown_Attribute -O--C- 100 100 000 - 0
241 Total_LBAs_Written -O--CK 099 099 000 - 48718083
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa1 GPL,SL VS 16 Device vendor specific log
0xa5 GPL,SL VS 16 Device vendor specific log
0xce GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: ?/ ? Celsius
Lifetime Min/Max Temperature: ?/ ? Celsius
Under/Over Temperature Limit Count: 0/668
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: ?/ ? Celsius
Min/Max Temperature Limit: ?/ ? Celsius
Temperature History Size (Index): 128 (73)
Index Estimated Time Temperature Celsius
74 2015-01-21 03:00 33 **************
75 2015-01-21 03:10 32 *************
76 2015-01-21 03:20 33 **************
77 2015-01-21 03:30 32 *************
78 2015-01-21 03:40 32 *************
79 2015-01-21 03:50 33 **************
80 2015-01-21 04:00 31 ************
81 2015-01-21 04:10 32 *************
82 2015-01-21 04:20 32 *************
83 2015-01-21 04:30 31 ************
84 2015-01-21 04:40 32 *************
85 2015-01-21 04:50 32 *************
86 2015-01-21 05:00 31 ************
... ..( 4 skipped). .. ************
91 2015-01-21 05:50 31 ************
92 2015-01-21 06:00 33 **************
93 2015-01-21 06:10 31 ************
94 2015-01-21 06:20 32 *************
95 2015-01-21 06:30 32 *************
96 2015-01-21 06:40 32 *************
97 2015-01-21 06:50 31 ************
98 2015-01-21 07:00 31 ************
99 2015-01-21 07:10 31 ************
100 2015-01-21 07:20 32 *************
101 2015-01-21 07:30 32 *************
102 2015-01-21 07:40 32 *************
103 2015-01-21 07:50 31 ************
104 2015-01-21 08:00 31 ************
105 2015-01-21 08:10 32 *************
106 2015-01-21 08:20 31 ************
107 2015-01-21 08:30 31 ************
108 2015-01-21 08:40 32 *************
109 2015-01-21 08:50 31 ************
110 2015-01-21 09:00 32 *************
111 2015-01-21 09:10 30 ***********
112 2015-01-21 09:20 30 ***********
113 2015-01-21 09:30 31 ************
114 2015-01-21 09:40 30 ***********
115 2015-01-21 09:50 32 *************
116 2015-01-21 10:00 31 ************
117 2015-01-21 10:10 32 *************
118 2015-01-21 10:20 32 *************
119 2015-01-21 10:30 31 ************
... ..( 6 skipped). .. ************
126 2015-01-21 11:40 31 ************
127 2015-01-21 11:50 30 ***********
0 2015-01-21 12:00 31 ************
1 2015-01-21 12:10 31 ************
2 2015-01-21 12:20 30 ***********
3 2015-01-21 12:30 30 ***********
4 2015-01-21 12:40 31 ************
5 2015-01-21 12:50 32 *************
6 2015-01-21 13:00 32 *************
7 2015-01-21 13:10 30 ***********
8 2015-01-21 13:20 31 ************
9 2015-01-21 13:30 30 ***********
10 2015-01-21 13:40 33 **************
11 2015-01-21 13:50 31 ************
... ..( 2 skipped). .. ************
14 2015-01-21 14:20 31 ************
15 2015-01-21 14:30 30 ***********
16 2015-01-21 14:40 31 ************
17 2015-01-21 14:50 31 ************
18 2015-01-21 15:00 31 ************
19 2015-01-21 15:10 30 ***********
20 2015-01-21 15:20 30 ***********
21 2015-01-21 15:30 31 ************
22 2015-01-21 15:40 31 ************
23 2015-01-21 15:50 31 ************
24 2015-01-21 16:00 30 ***********
25 2015-01-21 16:10 31 ************
26 2015-01-21 16:20 31 ************
27 2015-01-21 16:30 33 **************
28 2015-01-21 16:40 32 *************
29 2015-01-21 16:50 32 *************
30 2015-01-21 17:00 31 ************
31 2015-01-21 17:10 30 ***********
32 2015-01-21 17:20 33 **************
33 2015-01-21 17:30 32 *************
34 2015-01-21 17:40 31 ************
... ..( 2 skipped). .. ************
37 2015-01-21 18:10 31 ************
38 2015-01-21 18:20 32 *************
39 2015-01-21 18:30 32 *************
40 2015-01-21 18:40 31 ************
41 2015-01-21 18:50 32 *************
42 2015-01-21 19:00 31 ************
43 2015-01-21 19:10 31 ************
44 2015-01-21 19:20 30 ***********
45 2015-01-21 19:30 30 ***********
46 2015-01-21 19:40 31 ************
... ..( 2 skipped). .. ************
49 2015-01-21 20:10 31 ************
50 2015-01-21 20:20 30 ***********
51 2015-01-21 20:30 31 ************
... ..( 3 skipped). .. ************
55 2015-01-21 21:10 31 ************
56 2015-01-21 21:20 32 *************
57 2015-01-21 21:30 31 ************
58 2015-01-21 21:40 31 ************
59 2015-01-21 21:50 31 ************
60 2015-01-21 22:00 32 *************
61 2015-01-21 22:10 30 ***********
62 2015-01-21 22:20 31 ************
63 2015-01-21 22:30 31 ************
64 2015-01-21 22:40 31 ************
65 2015-01-21 22:50 30 ***********
66 2015-01-21 23:00 31 ************
67 2015-01-21 23:10 30 ***********
68 2015-01-21 23:20 31 ************
69 2015-01-21 23:30 30 ***********
70 2015-01-21 23:40 32 *************
71 2015-01-21 23:50 31 ************
72 2015-01-22 00:00 32 *************
73 2015-01-22 00:10 31 ************
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 11 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 11 Device-to-host register FISes sent due to a
COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS,
non-CRC
------------------------------------------------------------------------------
New Year. New Location. New Benefits. New Data Center in Ashburn, VA.
GigeNET is offering a free month of service with a new server in Ashburn.
Choose from 2 high performing configs, both with 100TB of bandwidth.
Higher redundancy.Lower latency.Increased capacity.Completely compliant.
http://p.sf.net/sfu/gigenet
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
