When using a "SAMSUNG HD080HJ/P" smartd displays the temeratures in strange
units, while the raw values seem to be the right ones:
Jun 24 08:23:00 smartd[4022]: Device: /dev/sda [SAT], SMART Usage Attribute:
190 Airflow_Temperature_Cel changed from 154 to 115
Jun 24 08:23:00 smartd[4022]: Device: /dev/sda [SAT], SMART Usage Attribute:
194 Temperature_Celsius changed from 154 to 115
Jun 24 08:53:00 smartd[4022]: Device: /dev/sda [SAT], SMART Usage Attribute:
190 Airflow_Temperature_Cel changed from 115 to 97
Jun 24 08:53:00 smartd[4022]: Device: /dev/sda [SAT], SMART Usage Attribute:
194 Temperature_Celsius changed from 115 to 97
However:
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 49 Celsius
Power Cycle Max Temperature: 53 Celsius
Lifetime Max Temperature: 55 Celsius
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 10/55 Celsius
Min/Max Temperature Limit: 5/60 Celsius
Temperature History Size (Index): 128 (74)
Index Estimated Time Temperature Celsius
75 2015-06-25 06:31 49 ******************************
... ..(126 skipped). .. ******************************
74 2015-06-25 08:38 49 ******************************
So here's the output of "smartctl -a":
---
smartctl 6.0 2012-10-10 r3643 [x86_64-linux-3.0.101-0.47.52-default] (SUSE RPM)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG HD080HJ/P
Serial Number: S0DEJ1QLC23456
Firmware Version: ZH100-34
User Capacity: 80,000,000,000 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA/ATAPI-7 T13/1532D revision 4a
Local Time is: Thu Jun 25 08:32:38 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1848) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always
- 4288
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always
- 2734
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000e 253 253 000 Old_age Always
- 0
8 Seek_Time_Performance 0x0024 253 253 000 Old_age Offline
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 9049
10 Spin_Retry_Count 0x0032 253 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0012 253 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always
- 1386
190 Airflow_Temperature_Cel 0x0022 091 076 000 Old_age Always
- 49
194 Temperature_Celsius 0x0022 091 076 000 Old_age Always
- 49
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always
- 106695
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x000a 100 100 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 100 000 Old_age Always
- 0
202 Data_Address_Mark_Errs 0x0032 253 253 000 Old_age Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 9022 -
# 2 Extended offline Completed without error 00% 9021 -
# 3 Short offline Completed without error 00% 0 -
# 4 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been
run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
---
# smartctl -P showall /dev/sda
No presets are defined for this drive. Its identity strings:
MODEL: /dev/sda
FIRMWARE: (any)
do not match any of the known regular expressions.
------------------------------------------------------------------------------
Monitor 25 network devices or servers for free with OpManager!
OpManager is web-based network management software that monitors
network devices and physical & virtual servers, alerts via email & sms
for fault. Monitor 25 devices for free with no restriction. Download now
http://ad.doubleclick.net/ddm/clk/292181274;119417398;o
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
