Please find attached a submission for the disk CT250BX100SSD1
smartctl 6.3 2014-07-26 r3976 [i686-w64-mingw32-vista-sp2] (sf-6.3-1)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     CT250BX100SSD1
Firmware Version: MU02
User Capacity:    250,059,350,016 bytes [250 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 (minor revision not indicated)
SATA Version is:  SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Wed Aug 19 22:54:38 2015 GMTDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x71) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        No Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  10) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x0035) SCT Status supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  
WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x0000   100   100   000    Old_age   Offline      
-       0
  5 Reallocated_Sector_Ct   0x0000   100   100   000    Old_age   Offline      
-       0
  9 Power_On_Hours          0x0000   100   100   000    Old_age   Offline      
-       0
 12 Power_Cycle_Count       0x0000   100   100   000    Old_age   Offline      
-       6
160 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       0
161 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       66
163 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       25
164 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       1205
165 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       3
166 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       1
167 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       1
168 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       2000
169 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       100
175 Program_Fail_Count_Chip 0x0000   100   100   000    Old_age   Offline      
-       0
176 Erase_Fail_Count_Chip   0x0000   100   100   000    Old_age   Offline      
-       0
177 Wear_Leveling_Count     0x0000   100   100   000    Old_age   Offline      
-       0
178 Used_Rsvd_Blk_Cnt_Chip  0x0000   100   100   000    Old_age   Offline      
-       0
181 Program_Fail_Cnt_Total  0x0000   100   100   000    Old_age   Offline      
-       0
182 Erase_Fail_Count_Total  0x0000   100   100   000    Old_age   Offline      
-       0
192 Power-Off_Retract_Count 0x0000   100   100   000    Old_age   Offline      
-       1
194 Temperature_Celsius     0x0000   100   100   000    Old_age   Offline      
-       36
195 Hardware_ECC_Recovered  0x0000   100   100   000    Old_age   Offline      
-       11
196 Reallocated_Event_Count 0x0000   100   100   000    Old_age   Offline      
-       0
197 Current_Pending_Sector  0x0000   100   100   000    Old_age   Offline      
-       0
198 Offline_Uncorrectable   0x0000   100   100   000    Old_age   Offline      
-       0
199 UDMA_CRC_Error_Count    0x0000   100   100   000    Old_age   Offline      
-       0
232 Available_Reservd_Space 0x0000   100   100   000    Old_age   Offline      
-       100
241 Total_LBAs_Written      0x0000   100   100   000    Old_age   Offline      
-       7450
242 Total_LBAs_Read         0x0000   100   100   000    Old_age   Offline      
-       4300
245 Unknown_Attribute       0x0000   100   100   000    Old_age   Offline      
-       9640

SMART Error Log not supported

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to