smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-4-686-pae] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Device Model: ST1000VX001-1HH162
Serial Number: S513SPCZ
LU WWN Device Id: 5 000c50 08c202279
Firmware Version: CV11
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 9
ATA Standard is: Not recognized. Minor revision code: 0x001f
Local Time is: Wed Oct 28 11:55:02 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 107) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 127) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x10b9) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 117 099 006 - 156706112
3 Spin_Up_Time PO---- 098 098 000 - 0
4 Start_Stop_Count -O--CK 100 100 020 - 6
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
7 Seek_Error_Rate POSR-- 066 060 030 - 3951510
9 Power_On_Hours -O--CK 100 100 000 - 359
10 Spin_Retry_Count PO--C- 100 100 097 - 0
12 Power_Cycle_Count -O--CK 100 100 020 - 5
184 End-to-End_Error -O--CK 100 100 099 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
189 High_Fly_Writes -O-RCK 100 100 000 - 0
190 Airflow_Temperature_Cel -O---K 075 070 045 - 25 (Min/Max 20/25)
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 5
193 Load_Cycle_Count -O--CK 100 100 000 - 6
194 Temperature_Celsius -O---K 025 040 000 - 25 (0 20 0 0)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
198 Offline_Uncorrectable ----C- 100 100 000 - 0
199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 5 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
GP/S Log at address 0x08 has 2 sectors [Power Conditions]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP Log at address 0x21 has 1 sectors [Write stream error log]
GP Log at address 0x22 has 1 sectors [Read stream error log]
GP/S Log at address 0x30 has 9 sectors [Reserved]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa1 has 20 sectors [Device vendor specific log]
GP Log at address 0xa2 has 4496 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 129 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP Log at address 0xab has 1 sectors [Device vendor specific log]
GP Log at address 0xb0 has 5176 sectors [Device vendor specific log]
GP Log at address 0xbe has 65535 sectors [Device vendor specific log]
GP Log at address 0xbf has 65535 sectors [Device vendor specific log]
GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc1 has 10 sectors [Device vendor specific log]
GP/S Log at address 0xc3 has 8 sectors [Device vendor specific log]
GP/S Log at address 0xc4 has 5 sectors [Device vendor specific log]
GP/S Log at address 0xd1 has 8 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 522 (0x020a)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 25 Celsius
Power Cycle Min/Max Temperature: 20/25 Celsius
Lifetime Min/Max Temperature: 20/29 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 94 minutes
Min/Max recommended Temperature: 1/61 Celsius
Min/Max Temperature Limit: 2/60 Celsius
Temperature History Size (Index): 128 (109)
Index Estimated Time Temperature Celsius
110 2015-10-20 05:34 22 ***
111 2015-10-20 07:08 22 ***
112 2015-10-20 08:42 23 ****
113 2015-10-20 10:16 23 ****
114 2015-10-20 11:50 24 *****
... ..( 2 skipped). .. *****
117 2015-10-20 16:32 24 *****
118 2015-10-20 18:06 23 ****
... ..( 3 skipped). .. ****
122 2015-10-21 00:22 23 ****
123 2015-10-21 01:56 22 ***
... ..( 2 skipped). .. ***
126 2015-10-21 06:38 22 ***
127 2015-10-21 08:12 23 ****
... ..( 2 skipped). .. ****
2 2015-10-21 12:54 23 ****
3 2015-10-21 14:28 24 *****
... ..( 2 skipped). .. *****
6 2015-10-21 19:10 24 *****
7 2015-10-21 20:44 23 ****
... ..( 7 skipped). .. ****
15 2015-10-22 09:16 23 ****
16 2015-10-22 10:50 24 *****
... ..( 4 skipped). .. *****
21 2015-10-22 18:40 24 *****
22 2015-10-22 20:14 23 ****
... ..( 7 skipped). .. ****
30 2015-10-23 08:46 23 ****
31 2015-10-23 10:20 24 *****
... ..( 4 skipped). .. *****
36 2015-10-23 18:10 24 *****
37 2015-10-23 19:44 23 ****
... ..( 4 skipped). .. ****
42 2015-10-24 03:34 23 ****
43 2015-10-24 05:08 22 ***
44 2015-10-24 06:42 22 ***
45 2015-10-24 08:16 23 ****
... ..( 9 skipped). .. ****
55 2015-10-24 23:56 23 ****
56 2015-10-25 01:30 22 ***
57 2015-10-25 02:04 23 ****
58 2015-10-25 03:38 23 ****
59 2015-10-25 05:12 22 ***
60 2015-10-25 06:46 23 ****
... ..( 11 skipped). .. ****
72 2015-10-26 01:34 23 ****
73 2015-10-26 03:08 22 ***
74 2015-10-26 04:42 22 ***
75 2015-10-26 06:16 23 ****
76 2015-10-26 07:50 23 ****
77 2015-10-26 09:24 24 *****
... ..( 5 skipped). .. *****
83 2015-10-26 18:48 24 *****
84 2015-10-26 20:22 23 ****
... ..( 7 skipped). .. ****
92 2015-10-27 08:54 23 ****
93 2015-10-27 10:28 24 *****
94 2015-10-27 12:02 24 *****
95 2015-10-27 13:36 24 *****
96 2015-10-27 15:10 25 ******
97 2015-10-27 16:44 24 *****
98 2015-10-27 18:18 24 *****
99 2015-10-27 19:52 24 *****
100 2015-10-27 21:26 23 ****
... ..( 5 skipped). .. ****
106 2015-10-28 06:50 23 ****
107 2015-10-28 08:24 24 *****
108 2015-10-28 09:58 25 ******
109 2015-10-28 11:32 25 ******
SCT Error Recovery Control:
Read: 70 (7,0 seconds)
Write: 70 (7,0 seconds)
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x000a 2 26 Device-to-host register FISes sent due to a COMRESET
0x0001 2 0 Command failed due to ICRC error
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
