Hi folks,
the following SSD is missing in the smart database:
* Device Model: KINGSTON SKC310S37A960G
* Serial Number: 50026B72530941DE
* Firmware Version: SAFM00.r
* User Capacity: 960,197,124,096 bytes [960 GB]
* Sector Size: 512 bytes logical/physical
* Rotation Rate: Solid State Device
Attached you can find the "smartctl -a" output, I am also adding a link
to a PDF describing the smart attributes:
*http://media.kingston.com/support/downloads/MKP_521_Phison_SMART_attribute.pdf
Cheers, Georg
# smartctl -a /dev/sdg
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.16.0-43-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: KINGSTON SKC310S37A960G
Serial Number: 50026B72530941DE
Firmware Version: SAFM00.r
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 18 08:27:04 2015 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 30) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always
- 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline
- 0
3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always
- 0
5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always
- 1
7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always
- 0
8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline
- 0
9 Power_On_Hours 0x0012 100 100 000 Old_age Always -
62
12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always -
6
168 Unknown_Attribute 0x0012 100 100 000 Old_age Always -
0
170 Unknown_Attribute 0x0003 099 099 010 Pre-fail Always -
4294970024
173 Unknown_Attribute 0x0012 100 100 000 Old_age Always -
196645
175 Program_Fail_Count_Chip 0x0013 100 100 050 Pre-fail Always -
0
187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always -
0
192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always -
3
194 Temperature_Celsius 0x0023 069 066 030 Pre-fail Always -
31 (Min/Max 26/34)
196 Reallocated_Event_Count 0x0002 100 100 010 Old_age Always -
1
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always -
0
199 UDMA_CRC_Error_Count 0x000b 100 100 050 Pre-fail Always -
0
218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always -
0
231 Temperature_Celsius 0x0013 100 100 000 Pre-fail Always -
100
233 Media_Wearout_Indicator 0x000b 100 100 000 Pre-fail Always -
4124
240 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always -
0
241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always -
2259
242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always -
517
244 Unknown_Attribute 0x0002 100 100 000 Old_age Always -
3
245 Unknown_Attribute 0x0002 100 100 000 Old_age Always -
37
246 Unknown_Attribute 0x0012 100 100 000 Old_age Always -
1063552
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
