smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.19.0-32-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SK hynix SH920 mSATA 256GB
Serial Number: EIE7M002212307Q5L
Firmware Version: 1010BL00
User Capacity: 256Â 060Â 514Â 304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Mar 2 10:35:23 2016 EET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
9 Power_On_Hours -O--CK 098 098 000 - 2344
12 Power_Cycle_Count -O--CK 100 100 020 - 1272
100 Unknown_Attribute -O--CK 100 100 000 - 1911783
171 Unknown_Attribute -O--CK 253 253 000 - 0
172 Unknown_Attribute -O--CK 253 100 000 - 0
174 Unknown_Attribute ----CK 100 100 000 - 92
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
177 Wear_Leveling_Count -O--CK 100 100 000 - 1446016
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 18
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 70
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 5242
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
182 Erase_Fail_Count_Total -O--CK 253 100 000 - 0
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 253 253 000 - 0
188 Command_Timeout -O--CK 253 253 000 - 0
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 039 000 000 - 39 (Min/Max 18/59)
195 Hardware_ECC_Recovered -O--CK 253 253 000 - 0
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
231 Temperature_Celsius PO--CK 253 253 --- - 0
234 Unknown_Attribute -O--CK 100 100 --- - 5750
241 Total_LBAs_Written -O--CK 100 100 --- - 4021
242 Total_LBAs_Read -O--CK 100 100 --- - 1643
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 8337
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 7949 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 7949 [8] occurred at disk power-on lifetime: 2342 hours (97 days + 14
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
Error 7948 [7] occurred at disk power-on lifetime: 2342 hours (97 days + 14
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
Error 7947 [6] occurred at disk power-on lifetime: 2342 hours (97 days + 14
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
Error 7946 [5] occurred at disk power-on lifetime: 2342 hours (97 days + 14
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
Error 7945 [4] occurred at disk power-on lifetime: 2334 hours (97 days + 6
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 00 d0 32 fc 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 3c 00 00 00 d0 32 c0 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 03 00 00 00 d0 32 bd 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 3d 00 00 00 d0 32 80 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 02 00 00 00 d0 32 7e 40 40 00:00:20.600 READ DMA EXT
Error 7944 [3] occurred at disk power-on lifetime: 2334 hours (97 days + 6
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 04 00 00 00 d0 32 fc 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 3c 00 00 00 d0 32 c0 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 03 00 00 00 d0 32 bd 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 3d 00 00 00 d0 32 80 40 40 00:00:20.600 READ DMA EXT
25 00 00 00 02 00 00 00 d0 32 7e 40 40 00:00:20.600 READ DMA EXT
Error 7943 [2] occurred at disk power-on lifetime: 2334 hours (97 days + 6
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:14.120 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:13.050 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:11.970 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:10.900 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:09.830 IDENTIFY DEVICE
Error 7942 [1] occurred at disk power-on lifetime: 2334 hours (97 days + 6
hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
00 -- 00 00 00 00 00 00 00 00 00 00 ff
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:05.120 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:05.120 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:05.020 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:04.930 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:04.930 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 2344 -
# 2 Short offline Completed without error 00% 0 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (empty) ==
4 ===== = = == General Errors Statistics (empty) ==
5 ===== = = == Temperature Statistics (empty) ==
6 ===== = = == Transport Statistics (empty) ==
7 ===== = = == Solid State Device Statistics (empty) ==
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web transactions and take corrective actions now
Troubleshoot faster and improve end-user experience. Signup Now!
http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
