smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ABA300V
Firmware Version: MZ6OACA0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5940 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jun 11 03:04:43 2016 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test
routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26282) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 438) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 144 144 054 - 83
3 Spin_Up_Time POS--- 217 217 024 - 265
(Average 240)
4 Start_Stop_Count -O--C- 100 100 000 - 25
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 138 138 020 - 33
9 Power_On_Hours -O--C- 100 100 000 - 357
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 19
192 Power-Off_Retract_Count -O--CK 100 100 000 - 25
193 Load_Cycle_Count -O--C- 100 100 000 - 25
194 Temperature_Celsius -O---- 214 214 000 - 28 (Min/Max
21/33)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining
LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 356 -
# 2 Short offline Completed without error 00% 345 -
# 3 Short offline Completed without error 00% 308 -
# 4 Extended offline Completed without error 00% 255 -
# 5 Short offline Completed without error 00% 248 -
# 6 Short offline Completed without error 00% 206 -
# 7 Extended offline Completed without error 00% 7 -
# 8 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 25/30 Celsius
Lifetime Min/Max Temperature: 21/33 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (65)
Index Estimated Time Temperature Celsius
66 2016-06-11 00:57 27 ********
67 2016-06-11 00:58 27 ********
68 2016-06-11 00:59 28 *********
... ..( 13 skipped). .. *********
82 2016-06-11 01:13 28 *********
83 2016-06-11 01:14 27 ********
... ..( 4 skipped). .. ********
88 2016-06-11 01:19 27 ********
89 2016-06-11 01:20 28 *********
90 2016-06-11 01:21 27 ********
91 2016-06-11 01:22 27 ********
92 2016-06-11 01:23 27 ********
93 2016-06-11 01:24 28 *********
... ..( 17 skipped). .. *********
111 2016-06-11 01:42 28 *********
112 2016-06-11 01:43 27 ********
113 2016-06-11 01:44 28 *********
114 2016-06-11 01:45 28 *********
115 2016-06-11 01:46 27 ********
116 2016-06-11 01:47 28 *********
117 2016-06-11 01:48 27 ********
118 2016-06-11 01:49 28 *********
119 2016-06-11 01:50 28 *********
120 2016-06-11 01:51 27 ********
121 2016-06-11 01:52 28 *********
122 2016-06-11 01:53 27 ********
123 2016-06-11 01:54 27 ********
124 2016-06-11 01:55 28 *********
125 2016-06-11 01:56 27 ********
... ..( 18 skipped). .. ********
16 2016-06-11 02:15 27 ********
17 2016-06-11 02:16 28 *********
18 2016-06-11 02:17 27 ********
19 2016-06-11 02:18 27 ********
20 2016-06-11 02:19 28 *********
21 2016-06-11 02:20 27 ********
... ..( 2 skipped). .. ********
24 2016-06-11 02:23 27 ********
25 2016-06-11 02:24 28 *********
26 2016-06-11 02:25 27 ********
... ..( 13 skipped). .. ********
40 2016-06-11 02:39 27 ********
41 2016-06-11 02:40 28 *********
42 2016-06-11 02:41 27 ********
43 2016-06-11 02:42 27 ********
44 2016-06-11 02:43 28 *********
45 2016-06-11 02:44 27 ********
46 2016-06-11 02:45 27 ********
47 2016-06-11 02:46 28 *********
48 2016-06-11 02:47 27 ********
49 2016-06-11 02:48 28 *********
... ..( 3 skipped). .. *********
53 2016-06-11 02:52 28 *********
54 2016-06-11 02:53 27 ********
55 2016-06-11 02:54 27 ********
56 2016-06-11 02:55 27 ********
57 2016-06-11 02:56 28 *********
58 2016-06-11 02:57 27 ********
59 2016-06-11 02:58 27 ********
60 2016-06-11 02:59 28 *********
61 2016-06-11 03:00 27 ********
... ..( 2 skipped). .. ********
64 2016-06-11 03:03 27 ********
65 2016-06-11 03:04 28 *********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 19 --- Lifetime Power-On Resets
0x01 0x010 4 357 --- Power-on Hours
0x01 0x018 6 2160186952 --- Logical Sectors Written
0x01 0x020 6 1861878 --- Number of Write Commands
0x01 0x028 6 8200146342 --- Logical Sectors Read
0x01 0x030 6 27597157 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 357 --- Spindle Motor Power-on Hours
0x03 0x010 4 357 --- Head Flying Hours
0x03 0x018 4 25 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 4 --- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 28 --- Current Temperature
0x05 0x010 1 27 N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 33 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 29 N-- Highest Average Short Term Temperature
0x05 0x038 1 23 N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 422 --- Number of Hardware Resets
0x06 0x010 4 269 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 55 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 49 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-24-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT01ABA300V
Firmware Version: MZ6OACA0
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5940 rpm
Form Factor: 3.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sat Jun 11 03:04:43 2016 CDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command
from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (26282) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 438) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
2 Throughput_Performance P-S--- 144 144 054 - 83
3 Spin_Up_Time POS--- 217 217 024 - 265 (Average 240)
4 Start_Stop_Count -O--C- 100 100 000 - 25
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
7 Seek_Error_Rate PO-R-- 100 100 067 - 0
8 Seek_Time_Performance P-S--- 138 138 020 - 33
9 Power_On_Hours -O--C- 100 100 000 - 357
10 Spin_Retry_Count PO--C- 100 100 060 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 19
192 Power-Off_Retract_Count -O--CK 100 100 000 - 25
193 Load_Cycle_Count -O--C- 100 100 000 - 25
194 Temperature_Celsius -O---- 214 214 000 - 28 (Min/Max 21/33)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O---K 100 100 000 - 0
198 Offline_Uncorrectable ---R-- 100 100 000 - 0
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL R/O 7 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x20 GPL R/O 1 Streaming performance log [OBS-8]
0x21 GPL R/O 1 Write stream error log
0x22 GPL R/O 1 Read stream error log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 356 -
# 2 Short offline Completed without error 00% 345 -
# 3 Short offline Completed without error 00% 308 -
# 4 Extended offline Completed without error 00% 255 -
# 5 Short offline Completed without error 00% 248 -
# 6 Short offline Completed without error 00% 206 -
# 7 Extended offline Completed without error 00% 7 -
# 8 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 28 Celsius
Power Cycle Min/Max Temperature: 25/30 Celsius
Lifetime Min/Max Temperature: 21/33 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -40/70 Celsius
Temperature History Size (Index): 128 (65)
Index Estimated Time Temperature Celsius
66 2016-06-11 00:57 27 ********
67 2016-06-11 00:58 27 ********
68 2016-06-11 00:59 28 *********
... ..( 13 skipped). .. *********
82 2016-06-11 01:13 28 *********
83 2016-06-11 01:14 27 ********
... ..( 4 skipped). .. ********
88 2016-06-11 01:19 27 ********
89 2016-06-11 01:20 28 *********
90 2016-06-11 01:21 27 ********
91 2016-06-11 01:22 27 ********
92 2016-06-11 01:23 27 ********
93 2016-06-11 01:24 28 *********
... ..( 17 skipped). .. *********
111 2016-06-11 01:42 28 *********
112 2016-06-11 01:43 27 ********
113 2016-06-11 01:44 28 *********
114 2016-06-11 01:45 28 *********
115 2016-06-11 01:46 27 ********
116 2016-06-11 01:47 28 *********
117 2016-06-11 01:48 27 ********
118 2016-06-11 01:49 28 *********
119 2016-06-11 01:50 28 *********
120 2016-06-11 01:51 27 ********
121 2016-06-11 01:52 28 *********
122 2016-06-11 01:53 27 ********
123 2016-06-11 01:54 27 ********
124 2016-06-11 01:55 28 *********
125 2016-06-11 01:56 27 ********
... ..( 18 skipped). .. ********
16 2016-06-11 02:15 27 ********
17 2016-06-11 02:16 28 *********
18 2016-06-11 02:17 27 ********
19 2016-06-11 02:18 27 ********
20 2016-06-11 02:19 28 *********
21 2016-06-11 02:20 27 ********
... ..( 2 skipped). .. ********
24 2016-06-11 02:23 27 ********
25 2016-06-11 02:24 28 *********
26 2016-06-11 02:25 27 ********
... ..( 13 skipped). .. ********
40 2016-06-11 02:39 27 ********
41 2016-06-11 02:40 28 *********
42 2016-06-11 02:41 27 ********
43 2016-06-11 02:42 27 ********
44 2016-06-11 02:43 28 *********
45 2016-06-11 02:44 27 ********
46 2016-06-11 02:45 27 ********
47 2016-06-11 02:46 28 *********
48 2016-06-11 02:47 27 ********
49 2016-06-11 02:48 28 *********
... ..( 3 skipped). .. *********
53 2016-06-11 02:52 28 *********
54 2016-06-11 02:53 27 ********
55 2016-06-11 02:54 27 ********
56 2016-06-11 02:55 27 ********
57 2016-06-11 02:56 28 *********
58 2016-06-11 02:57 27 ********
59 2016-06-11 02:58 27 ********
60 2016-06-11 02:59 28 *********
61 2016-06-11 03:00 27 ********
... ..( 2 skipped). .. ********
64 2016-06-11 03:03 27 ********
65 2016-06-11 03:04 28 *********
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 19 --- Lifetime Power-On Resets
0x01 0x010 4 357 --- Power-on Hours
0x01 0x018 6 2160186952 --- Logical Sectors Written
0x01 0x020 6 1861878 --- Number of Write Commands
0x01 0x028 6 8200146342 --- Logical Sectors Read
0x01 0x030 6 27597157 --- Number of Read Commands
0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
0x03 0x008 4 357 --- Spindle Motor Power-on Hours
0x03 0x010 4 357 --- Head Flying Hours
0x03 0x018 4 25 --- Head Load Events
0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
0x03 0x028 4 0 --- Read Recovery Attempts
0x03 0x030 4 0 --- Number of Mechanical Start Failures
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 4 --- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 28 --- Current Temperature
0x05 0x010 1 27 N-- Average Short Term Temperature
0x05 0x018 1 - N-- Average Long Term Temperature
0x05 0x020 1 33 --- Highest Temperature
0x05 0x028 1 21 --- Lowest Temperature
0x05 0x030 1 29 N-- Highest Average Short Term Temperature
0x05 0x038 1 23 N-- Lowest Average Short Term Temperature
0x05 0x040 1 - N-- Highest Average Long Term Temperature
0x05 0x048 1 - N-- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 60 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 422 --- Number of Hardware Resets
0x06 0x010 4 269 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0009 2 55 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 49 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
