smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Device Model:     Corsair Neutron GTX SSD
Serial Number:    12467902000019090063
Firmware Version: M206
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Mon Jul  4 23:45:19 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                (    2) seconds.
Offline data collection
capabilities:                    (0x1d) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Abort Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        No Conveyance Self-test supported.
                                        No Selective Self-test supported.
SMART capabilities:            (0x0002) Does not save SMART data before
                                        entering power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        No General Purpose Logging support.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   5) minutes.

SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     -OSR-K   166   166   006    -    0
  5 Reallocated_Sector_Ct   -O--CK   253   253   036    -    0
  9 Power_On_Hours          -O--CK   071   071   000    -    25968
 12 Power_Cycle_Count       -O--CK   100   100   020    -    131
171 Unknown_Attribute       -O--CK   253   253   000    -    0
172 Unknown_Attribute       -O--CK   253   253   000    -    0
181 Program_Fail_Cnt_Total  -O--CK   253   253   000    -    0
182 Erase_Fail_Count_Total  -O--CK   253   253   000    -    0
194 Temperature_Celsius     -O----   039   000   000    -    39 (Min/Max 19/44)
201 Soft_Read_Error_Rate    -O--CK   100   100   000    -    0
204 Soft_ECC_Correction     -O--CK   100   100   000    -    0
231 Temperature_Celsius     -O--CK   096   096   000    -    5
234 Unknown_Attribute       -O--CK   100   100   000    -    65744
241 Total_LBAs_Written      -O--CK   100   100   000    -    12351
242 Total_LBAs_Read         -O--CK   100   100   000    -    15116
250 Read_Error_Retry_Rate   -O--CK   253   253   000    -    0
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
SMART Log at address 0x01 has    1 sectors [Summary SMART error log]
SMART Log at address 0x02 has    4 sectors [Comprehensive SMART error log]
GP/S  Log at address 0x03 has    5 sectors [Ext. Comprehensive SMART error log]
GP    Log at address 0x07 has    2 sectors [Extended self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 3974 (device log contains only the most recent 20 errors)
        CR     = Command Register
        FEATR  = Features Register
        COUNT  = Count (was: Sector Count) Register
        LBA_48 = Upper bytes of LBA High/Mid/Low Registers ]  ATA-8
        LH     = LBA High (was: Cylinder High) Register    ]   LBA
        LM     = LBA Mid (was: Cylinder Low) Register      ] Register
        LL     = LBA Low (was: Sector Number) Register     ]
        DV     = Device (was: Device/Head) Register
        DC     = Device Control Register
        ER     = Error register
        ST     = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 3974 [13] occurred at disk power-on lifetime: 25967 hours (1081 days + 23 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 24d+02:23:10.350  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 24d+02:23:10.350  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 24d+02:23:10.350  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 24d+02:23:10.350  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 24d+02:23:10.350  SMART READ DATA

Error 3973 [12] occurred at disk power-on lifetime: 25967 hours (1081 days + 23 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 ff 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 24d+02:22:23.470  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 24d+02:22:23.470  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 24d+02:22:23.470  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 24d+02:22:23.470  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 24d+02:22:23.470  SMART READ DATA

Error 3972 [11] occurred at disk power-on lifetime: 25967 hours (1081 days + 23 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 01 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 24d+02:20:28.750  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 24d+02:20:28.750  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 24d+02:20:28.750  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 24d+02:20:28.750  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 24d+02:20:28.750  SMART READ DATA

Error 3971 [10] occurred at disk power-on lifetime: 25940 hours (1080 days + 20 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 22d+23:00:15.480  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 22d+23:00:15.480  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 22d+23:00:15.480  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 22d+23:00:15.480  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 22d+23:00:15.480  SMART READ DATA

Error 3970 [9] occurred at disk power-on lifetime: 25940 hours (1080 days + 20 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 01 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 22d+22:57:09.800  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 22d+22:57:09.800  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 22d+22:57:09.800  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 22d+22:57:09.800  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 22d+22:57:09.800  SMART READ DATA

Error 3969 [8] occurred at disk power-on lifetime: 25940 hours (1080 days + 20 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 22d+22:56:54.470  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 22d+22:56:54.470  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 22d+22:56:54.470  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 22d+22:56:54.470  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 22d+22:56:54.470  SMART READ DATA

Error 3968 [7] occurred at disk power-on lifetime: 25940 hours (1080 days + 20 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 01 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 22d+22:55:37.320  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 22d+22:55:37.320  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 22d+22:55:37.320  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 22d+22:55:37.320  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 22d+22:55:37.320  SMART READ DATA

Error 3967 [6] occurred at disk power-on lifetime: 25940 hours (1080 days + 20 
hours)
  When the command that caused the error occurred, the device was in an unknown 
state.

  After command completion occurred, registers were:
  ER -- ST COUNT  LBA_48  LH LM LL DV DC
  -- -- -- == -- == == == -- -- -- -- --
  10 -- 51 00 00 00 00 00 c2 4f 00 e0 08  Error: IDNF

  Commands leading to the command that caused the error were:
  CR FEATR COUNT  LBA_48  LH LM LL DV DC  Powered_Up_Time  Command/Feature_Name
  -- == -- == -- == == == -- -- -- -- --  ---------------  --------------------
  b0 00 d5 00 01 00 00 00 c2 4f 06 00 00 22d+22:54:30.380  SMART READ LOG
  b0 00 d5 00 01 00 00 00 c2 4f 01 00 00 22d+22:54:30.380  SMART READ LOG
  b0 00 da 00 00 00 00 00 c2 4f 00 00 00 22d+22:54:30.380  SMART RETURN STATUS
  b0 00 d1 00 01 00 00 00 c2 4f 01 00 00 22d+22:54:30.380  SMART READ ATTRIBUTE 
THRESHOLDS [OBS-4]
  b0 00 d0 00 01 00 00 00 c2 4f 00 00 00 22d+22:54:30.380  SMART READ DATA

SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  
LBA_of_first_error
# 1  Short offline       Completed without error       00%     25968         -
# 2  Extended offline    Completed without error       00%     25940         -
# 3  Short offline       Completed without error       00%     25940         -
# 4  Short offline       Completed without error       00%     25940         -
# 5  Short offline       Completed without error       00%        37         -

Device does not support Selective Self Tests/Logging
Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0002  2            0  R_ERR response for data FIS
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            0  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2           86  Device-to-host register FISes sent due to a COMRESET
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC

Attachment: signature.asc
Description: This is a digitally signed message part

------------------------------------------------------------------------------
Attend Shape: An AT&T Tech Expo July 15-16. Meet us at AT&T Park in San
Francisco, CA to explore cutting-edge tech and listen to tech luminaries
present their vision of the future. This family event has something for
everyone, including kids. Get more information and register today.
http://sdm.link/attshape
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database

Reply via email to