Hello
Could you place add this hardrive to drivedb.h
Attached file !
--
Best Regards;
Hector Roman Jerezano
smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.7.0-040700-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: SK hynix SC210 mSATA 256GB
Serial Number: EJ57N044911107537
Firmware Version: 20002L00
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: mSATA
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Aug 9 21:31:37 2016 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Unavailable
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 5) seconds.
Offline data collection
capabilities: (0x19) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0002) Does not save SMART data before
entering power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 17) minutes.
SMART Attributes Data Structure revision number: 0
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-- 166 166 006 - 0
5 Reallocated_Sector_Ct -O--CK 253 253 036 - 0
9 Power_On_Hours -O--CK 099 099 000 - 1357
12 Power_Cycle_Count -O--CK 100 100 020 - 3903
100 Unknown_Attribute -O--CK 100 100 000 - 891646
171 Unknown_Attribute -O--CK 253 253 000 - 0
172 Unknown_Attribute -O--CK 253 253 000 - 0
174 Unknown_Attribute ----CK 100 100 000 - 523
175 Program_Fail_Count_Chip -O--CK 253 253 000 - 0
176 Erase_Fail_Count_Chip -O--CK 253 253 000 - 0
177 Wear_Leveling_Count -O--CK 100 100 000 - 13
178 Used_Rsvd_Blk_Cnt_Chip -O--CK 100 100 000 - 43
179 Used_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 159
180 Unused_Rsvd_Blk_Cnt_Tot -O--CK 100 100 000 - 4193
181 Program_Fail_Cnt_Total -O--CK 253 253 000 - 0
182 Erase_Fail_Count_Total -O--CK 253 253 000 - 0
183 Runtime_Bad_Block -O--CK 253 253 000 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 123
188 Command_Timeout -O--CK 253 253 000 - 0
191 Unknown_SSD_Attribute -O--CK 253 253 000 - 0
194 Temperature_Celsius -O---- 043 000 000 - 43 (Min/Max 20/67)
195 Hardware_ECC_Recovered -O--CK 100 099 000 - 34224040
201 Unknown_SSD_Attribute -OSR-- 100 100 000 - 0
204 Soft_ECC_Correction -OSR-- 100 100 --- - 0
231 Temperature_Celsius PO--CK 253 253 --- - 0
234 Unknown_Attribute -O--CK 100 100 --- - 3004
241 Total_LBAs_Written -O--CK 100 100 --- - 1835
242 Total_LBAs_Read -O--CK 100 100 --- - 2007
250 Read_Error_Retry_Rate -O--CK 100 100 --- - 267
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 4 Comprehensive SMART error log
0x03 GPL R/O 5 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
Device Error Count: 3468 (device log contains only the most recent 20 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 3468 [7] occurred at disk power-on lifetime: 1325 hours (55 days + 5
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:23.440 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:23.440 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:23.440 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:23.440 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:22.880 IDENTIFY DEVICE
Error 3467 [6] occurred at disk power-on lifetime: 1273 hours (53 days + 1
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:08.020 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:08.020 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:08.000 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:08.000 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:07.450 IDENTIFY DEVICE
Error 3466 [5] occurred at disk power-on lifetime: 1270 hours (52 days + 22
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:16.660 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:16.660 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:16.660 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:16.660 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:16.110 IDENTIFY DEVICE
Error 3465 [4] occurred at disk power-on lifetime: 1270 hours (52 days + 22
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:22.170 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:22.170 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:22.160 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:22.160 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:21.610 IDENTIFY DEVICE
Error 3464 [3] occurred at disk power-on lifetime: 1270 hours (52 days + 22
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:24.620 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:24.610 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:24.610 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:24.610 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:24.060 IDENTIFY DEVICE
Error 3463 [2] occurred at disk power-on lifetime: 1192 hours (49 days + 16
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:19.030 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:19.030 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:19.030 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:19.030 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:18.480 IDENTIFY DEVICE
Error 3462 [1] occurred at disk power-on lifetime: 1182 hours (49 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:26.640 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:26.640 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:26.640 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:26.640 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:26.080 IDENTIFY DEVICE
Error 3461 [0] occurred at disk power-on lifetime: 1052 hours (43 days + 20
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
10 -- 51 00 00 00 00 00 00 00 00 e0 00 Error: IDNF
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
b0 00 d5 00 01 00 00 00 c2 4f e0 00 00 00:00:18.710 SMART READ LOG
20 00 00 00 01 00 00 00 00 00 00 40 40 00:00:18.710 READ SECTOR(S)
b0 00 d5 00 01 00 00 00 c2 4f 9a 00 00 00:00:18.710 SMART READ LOG
ec 00 00 00 01 00 00 00 00 00 00 40 40 00:00:18.700 IDENTIFY DEVICE
ec 00 00 00 00 00 00 00 00 00 00 00 00 00:00:17.590 IDENTIFY DEVICE
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 1357 -
# 2 Short offline Completed without error 00% 1357 -
# 3 Short offline Completed without error 00% 1273 -
# 4 Short offline Completed without error 00% 1270 -
# 5 Short offline Completed without error 00% 1270 -
# 6 Short offline Completed without error 00% 1270 -
# 7 Short offline Completed without error 00% 1192 -
# 8 Short offline Completed without error 00% 1182 -
# 9 Short offline Completed without error 00% 1052 -
#10 Short offline Completed without error 00% 256 -
#11 Short offline Completed without error 00% 155 -
#12 Short offline Completed without error 00% 0 -
Selective Self-tests/Logging not supported
SCT Commands not supported
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (empty) ==
0x04 ===== = = === == General Errors Statistics (empty) ==
0x05 ===== = = === == Temperature Statistics (empty) ==
0x06 ===== = = === == Transport Statistics (empty) ==
0x07 ===== = = === == Solid State Device Statistics (empty) ==
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are
consuming the most bandwidth. Provides multi-vendor support for NetFlow,
J-Flow, sFlow and other flows. Make informed decisions using capacity
planning reports. http://sdm.link/zohodev2dev
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
