--
Best regards,
Marek Slahor
CEO, Motyl Online Services, s.r.o.
+421(948)032774
smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win10(64)] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD5003ABYZ-011FA0
Serial Number: WD-WMAYP0F083RT
LU WWN Device Id: 5 0014ee 003f1294d
Firmware Version: 01.01S03
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Sep 01 19:28:44 2016 CEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 113) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 8100) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 195 051 - 0
3 Spin_Up_Time POS--K 140 139 021 - 3991
4 Start_Stop_Count -O--CK 100 100 000 - 651
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 082 082 000 - 13239
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 325
192 Power-Off_Retract_Count -O--CK 200 200 000 - 70
193 Load_Cycle_Count -O--CK 200 200 000 - 606
194 Temperature_Celsius -O---K 101 088 000 - 42
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 13
198 Offline_Uncorrectable ----CK 200 200 000 - 13
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 13
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 690 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 690 [17] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 78 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a578 = 700949880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 78 e0 00 9d+23:08:00.146 READ DMA EXT
35 00 00 00 38 00 00 19 bc ce d8 e0 00 9d+23:08:00.146 WRITE DMA EXT
35 00 00 00 08 00 00 00 a7 a1 a8 e0 00 9d+23:08:00.146 WRITE DMA EXT
35 00 00 00 10 00 00 00 6b 33 d8 e0 00 9d+23:08:00.145 WRITE DMA EXT
ea 00 00 00 00 c7 a5 71 00 00 00 e0 00 9d+23:08:00.100 FLUSH CACHE EXT
Error 689 [16] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 71 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 70 e0 00 9d+23:07:58.470 READ DMA EXT
35 00 00 00 08 00 00 12 64 9b 18 e0 00 9d+23:07:58.469 WRITE DMA EXT
35 00 00 00 08 00 00 00 15 25 98 e0 00 9d+23:07:58.469 WRITE DMA EXT
35 00 00 00 10 00 00 2a 09 64 78 e0 00 9d+23:07:58.469 WRITE DMA EXT
25 00 00 00 70 00 00 29 c7 a6 70 e0 00 9d+23:07:58.469 READ DMA EXT
Error 688 [15] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 29 c7 a5 71 e0 00 Error: UNC 256 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 29 c7 a5 70 e0 00 9d+23:07:56.829 READ DMA EXT
35 00 00 00 28 00 00 00 6b 34 38 e0 00 9d+23:07:56.829 WRITE DMA EXT
ea 00 00 00 00 c7 a6 df 00 00 00 e0 00 9d+23:07:56.779 FLUSH CACHE EXT
25 00 00 00 70 00 00 29 c7 a6 70 e0 00 9d+23:07:56.779 READ DMA EXT
35 00 00 00 08 00 00 19 9e 81 e0 e0 00 9d+23:07:56.779 WRITE DMA EXT
Error 687 [14] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 29 c7 a5 71 e0 00 Error: UNC 256 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 29 c7 a5 70 e0 00 9d+23:07:55.141 READ DMA EXT
35 00 00 00 08 00 00 00 6b 33 b8 e0 00 9d+23:07:55.140 WRITE DMA EXT
25 00 00 00 40 00 00 29 c7 a5 b8 e0 00 9d+23:07:55.140 READ DMA EXT
25 00 00 00 08 00 00 29 c7 a5 b0 e0 00 9d+23:07:55.140 READ DMA EXT
35 00 00 00 08 00 00 1a 49 6e 78 e0 00 9d+23:07:55.140 WRITE DMA EXT
Error 686 [13] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 78 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a578 = 700949880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 78 e0 00 9d+23:07:53.326 READ DMA EXT
35 00 00 00 50 00 00 1a 49 6e 78 e0 00 9d+23:07:53.325 WRITE DMA EXT
35 00 00 00 78 00 00 19 b3 6a e0 e0 00 9d+23:07:53.325 WRITE DMA EXT
35 00 00 00 80 00 00 19 9e 82 88 e0 00 9d+23:07:53.325 WRITE DMA EXT
35 00 00 00 68 00 00 00 6d 30 08 e0 00 9d+23:07:53.324 WRITE DMA EXT
Error 685 [12] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 6c e0 00 Error: UNC 8 sectors at LBA =
0x29c7a56c = 700949868
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 68 e0 00 9d+23:07:51.676 READ DMA EXT
35 00 00 00 08 00 00 19 9e c4 b8 e0 00 9d+23:07:51.676 WRITE DMA EXT
35 00 00 00 08 00 00 15 fa 7a 48 e0 00 9d+23:07:51.676 WRITE DMA EXT
35 00 00 00 18 00 00 00 6b 34 48 e0 00 9d+23:07:51.676 WRITE DMA EXT
25 00 00 00 08 00 00 29 c7 a5 70 e0 00 9d+23:07:50.044 READ DMA EXT
Error 684 [11] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 71 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 70 e0 00 9d+23:07:50.044 READ DMA EXT
25 00 00 00 08 00 00 29 c7 a5 68 e0 00 9d+23:07:48.413 READ DMA EXT
35 00 00 00 80 00 00 19 9e 85 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 84 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 83 08 e0 00 9d+23:07:48.412 WRITE DMA EXT
Error 683 [10] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 6c e0 00 Error: UNC 8 sectors at LBA =
0x29c7a56c = 700949868
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 68 e0 00 9d+23:07:48.413 READ DMA EXT
35 00 00 00 80 00 00 19 9e 85 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 84 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 83 08 e0 00 9d+23:07:48.412 WRITE DMA EXT
35 00 00 00 03 00 00 00 15 24 98 e0 00 9d+23:07:48.412 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: read failure 10% 13238
700949868
# 2 Short offline Completed without error 00% 10413 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 24/44 Celsius
Lifetime Min/Max Temperature: 0/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (62)
Index Estimated Time Temperature Celsius
63 2016-09-01 11:31 41 **********************
... ..( 53 skipped). .. **********************
117 2016-09-01 12:25 41 **********************
118 2016-09-01 12:26 42 ***********************
... ..( 13 skipped). .. ***********************
132 2016-09-01 12:40 42 ***********************
133 2016-09-01 12:41 43 ************************
... ..( 5 skipped). .. ************************
139 2016-09-01 12:47 43 ************************
140 2016-09-01 12:48 42 ***********************
141 2016-09-01 12:49 43 ************************
... ..( 16 skipped). .. ************************
158 2016-09-01 13:06 43 ************************
159 2016-09-01 13:07 42 ***********************
... ..( 3 skipped). .. ***********************
163 2016-09-01 13:11 42 ***********************
164 2016-09-01 13:12 43 ************************
... ..( 17 skipped). .. ************************
182 2016-09-01 13:30 43 ************************
183 2016-09-01 13:31 42 ***********************
184 2016-09-01 13:32 42 ***********************
185 2016-09-01 13:33 40 *********************
... ..(258 skipped). .. *********************
444 2016-09-01 17:52 40 *********************
445 2016-09-01 17:53 41 **********************
... ..( 2 skipped). .. **********************
448 2016-09-01 17:56 41 **********************
449 2016-09-01 17:57 42 ***********************
... ..( 6 skipped). .. ***********************
456 2016-09-01 18:04 42 ***********************
457 2016-09-01 18:05 43 ************************
... ..( 13 skipped). .. ************************
471 2016-09-01 18:19 43 ************************
472 2016-09-01 18:20 44 *************************
473 2016-09-01 18:21 44 *************************
474 2016-09-01 18:22 43 ************************
... ..( 2 skipped). .. ************************
477 2016-09-01 18:25 43 ************************
0 2016-09-01 18:26 42 ***********************
... ..( 5 skipped). .. ***********************
6 2016-09-01 18:32 42 ***********************
7 2016-09-01 18:33 41 **********************
... ..( 54 skipped). .. **********************
62 2016-09-01 19:28 41 **********************
SCT Error Recovery Control:
Read: 70 (7,0 seconds)
Write: 70 (7,0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 887644 Vendor specific
smartctl 6.5 2016-05-07 r4318 [x86_64-w64-mingw32-win10] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: WDC WD5003ABYZ-011FA0
Serial Number: WD-WMAYP0F083RT
LU WWN Device Id: 5 0014ee 003f1294d
Firmware Version: 01.01S03
User Capacity: 500 107 862 016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu Sep 01 20:03:39 2016 CEDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command
from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 8100) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 82) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 195 051 - 0
3 Spin_Up_Time POS--K 140 139 021 - 3991
4 Start_Stop_Count -O--CK 100 100 000 - 651
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 100 253 000 - 0
9 Power_On_Hours -O--CK 082 082 000 - 13239
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 325
192 Power-Off_Retract_Count -O--CK 200 200 000 - 70
193 Load_Cycle_Count -O--CK 200 200 000 - 606
194 Temperature_Celsius -O---K 100 088 000 - 43
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 13
198 Offline_Uncorrectable ----CK 200 200 000 - 13
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 13
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 5 Comprehensive SMART error log
0x03 GPL R/O 6 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa0-0xa7 GPL,SL VS 16 Device vendor specific log
0xa8-0xb5 GPL,SL VS 1 Device vendor specific log
0xb6 GPL VS 1 Device vendor specific log
0xb7 GPL,SL VS 1 Device vendor specific log
0xbd GPL,SL VS 1 Device vendor specific log
0xc0 GPL,SL VS 1 Device vendor specific log
0xc1 GPL VS 24 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 690 (device log contains only the most recent 24 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 690 [17] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 78 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a578 = 700949880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 78 e0 00 9d+23:08:00.146 READ DMA EXT
35 00 00 00 38 00 00 19 bc ce d8 e0 00 9d+23:08:00.146 WRITE DMA EXT
35 00 00 00 08 00 00 00 a7 a1 a8 e0 00 9d+23:08:00.146 WRITE DMA EXT
35 00 00 00 10 00 00 00 6b 33 d8 e0 00 9d+23:08:00.145 WRITE DMA EXT
ea 00 00 00 00 c7 a5 71 00 00 00 e0 00 9d+23:08:00.100 FLUSH CACHE EXT
Error 689 [16] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 71 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 70 e0 00 9d+23:07:58.470 READ DMA EXT
35 00 00 00 08 00 00 12 64 9b 18 e0 00 9d+23:07:58.469 WRITE DMA EXT
35 00 00 00 08 00 00 00 15 25 98 e0 00 9d+23:07:58.469 WRITE DMA EXT
35 00 00 00 10 00 00 2a 09 64 78 e0 00 9d+23:07:58.469 WRITE DMA EXT
25 00 00 00 70 00 00 29 c7 a6 70 e0 00 9d+23:07:58.469 READ DMA EXT
Error 688 [15] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 29 c7 a5 71 e0 00 Error: UNC 256 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 29 c7 a5 70 e0 00 9d+23:07:56.829 READ DMA EXT
35 00 00 00 28 00 00 00 6b 34 38 e0 00 9d+23:07:56.829 WRITE DMA EXT
ea 00 00 00 00 c7 a6 df 00 00 00 e0 00 9d+23:07:56.779 FLUSH CACHE EXT
25 00 00 00 70 00 00 29 c7 a6 70 e0 00 9d+23:07:56.779 READ DMA EXT
35 00 00 00 08 00 00 19 9e 81 e0 e0 00 9d+23:07:56.779 WRITE DMA EXT
Error 687 [14] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 01 00 00 00 29 c7 a5 71 e0 00 Error: UNC 256 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 01 00 00 00 29 c7 a5 70 e0 00 9d+23:07:55.141 READ DMA EXT
35 00 00 00 08 00 00 00 6b 33 b8 e0 00 9d+23:07:55.140 WRITE DMA EXT
25 00 00 00 40 00 00 29 c7 a5 b8 e0 00 9d+23:07:55.140 READ DMA EXT
25 00 00 00 08 00 00 29 c7 a5 b0 e0 00 9d+23:07:55.140 READ DMA EXT
35 00 00 00 08 00 00 1a 49 6e 78 e0 00 9d+23:07:55.140 WRITE DMA EXT
Error 686 [13] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 78 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a578 = 700949880
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 78 e0 00 9d+23:07:53.326 READ DMA EXT
35 00 00 00 50 00 00 1a 49 6e 78 e0 00 9d+23:07:53.325 WRITE DMA EXT
35 00 00 00 78 00 00 19 b3 6a e0 e0 00 9d+23:07:53.325 WRITE DMA EXT
35 00 00 00 80 00 00 19 9e 82 88 e0 00 9d+23:07:53.325 WRITE DMA EXT
35 00 00 00 68 00 00 00 6d 30 08 e0 00 9d+23:07:53.324 WRITE DMA EXT
Error 685 [12] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 6c e0 00 Error: UNC 8 sectors at LBA =
0x29c7a56c = 700949868
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 68 e0 00 9d+23:07:51.676 READ DMA EXT
35 00 00 00 08 00 00 19 9e c4 b8 e0 00 9d+23:07:51.676 WRITE DMA EXT
35 00 00 00 08 00 00 15 fa 7a 48 e0 00 9d+23:07:51.676 WRITE DMA EXT
35 00 00 00 18 00 00 00 6b 34 48 e0 00 9d+23:07:51.676 WRITE DMA EXT
25 00 00 00 08 00 00 29 c7 a5 70 e0 00 9d+23:07:50.044 READ DMA EXT
Error 684 [11] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 71 e0 00 Error: UNC 8 sectors at LBA =
0x29c7a571 = 700949873
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 70 e0 00 9d+23:07:50.044 READ DMA EXT
25 00 00 00 08 00 00 29 c7 a5 68 e0 00 9d+23:07:48.413 READ DMA EXT
35 00 00 00 80 00 00 19 9e 85 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 84 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 83 08 e0 00 9d+23:07:48.412 WRITE DMA EXT
Error 683 [10] occurred at disk power-on lifetime: 13231 hours (551 days + 7
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 08 00 00 29 c7 a5 6c e0 00 Error: UNC 8 sectors at LBA =
0x29c7a56c = 700949868
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 08 00 00 29 c7 a5 68 e0 00 9d+23:07:48.413 READ DMA EXT
35 00 00 00 80 00 00 19 9e 85 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 84 08 e0 00 9d+23:07:48.413 WRITE DMA EXT
35 00 00 01 00 00 00 19 9e 83 08 e0 00 9d+23:07:48.412 WRITE DMA EXT
35 00 00 00 03 00 00 00 15 24 98 e0 00 9d+23:07:48.412 WRITE DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: read failure 90% 13239
700949868
# 2 Short offline Completed: read failure 10% 13238
700949868
# 3 Short offline Completed without error 00% 10413 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 43 Celsius
Power Cycle Min/Max Temperature: 24/44 Celsius
Lifetime Min/Max Temperature: 0/55 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 478 (97)
Index Estimated Time Temperature Celsius
98 2016-09-01 12:06 41 **********************
... ..( 18 skipped). .. **********************
117 2016-09-01 12:25 41 **********************
118 2016-09-01 12:26 42 ***********************
... ..( 13 skipped). .. ***********************
132 2016-09-01 12:40 42 ***********************
133 2016-09-01 12:41 43 ************************
... ..( 5 skipped). .. ************************
139 2016-09-01 12:47 43 ************************
140 2016-09-01 12:48 42 ***********************
141 2016-09-01 12:49 43 ************************
... ..( 16 skipped). .. ************************
158 2016-09-01 13:06 43 ************************
159 2016-09-01 13:07 42 ***********************
... ..( 3 skipped). .. ***********************
163 2016-09-01 13:11 42 ***********************
164 2016-09-01 13:12 43 ************************
... ..( 17 skipped). .. ************************
182 2016-09-01 13:30 43 ************************
183 2016-09-01 13:31 42 ***********************
... ..( 7 skipped). .. ***********************
191 2016-09-01 13:39 42 ***********************
192 2016-09-01 13:40 41 **********************
... ..( 16 skipped). .. **********************
209 2016-09-01 13:57 41 **********************
210 2016-09-01 13:58 42 ***********************
... ..( 2 skipped). .. ***********************
213 2016-09-01 14:01 42 ***********************
214 2016-09-01 14:02 43 ************************
... ..( 4 skipped). .. ************************
219 2016-09-01 14:07 43 ************************
220 2016-09-01 14:08 40 *********************
... ..(223 skipped). .. *********************
444 2016-09-01 17:52 40 *********************
445 2016-09-01 17:53 41 **********************
... ..( 2 skipped). .. **********************
448 2016-09-01 17:56 41 **********************
449 2016-09-01 17:57 42 ***********************
... ..( 6 skipped). .. ***********************
456 2016-09-01 18:04 42 ***********************
457 2016-09-01 18:05 43 ************************
... ..( 13 skipped). .. ************************
471 2016-09-01 18:19 43 ************************
472 2016-09-01 18:20 44 *************************
473 2016-09-01 18:21 44 *************************
474 2016-09-01 18:22 43 ************************
... ..( 2 skipped). .. ************************
477 2016-09-01 18:25 43 ************************
0 2016-09-01 18:26 42 ***********************
... ..( 5 skipped). .. ***********************
6 2016-09-01 18:32 42 ***********************
7 2016-09-01 18:33 41 **********************
... ..( 89 skipped). .. **********************
97 2016-09-01 20:03 41 **********************
SCT Error Recovery Control:
Read: 70 (7,0 seconds)
Write: 70 (7,0 seconds)
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 3 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 889738 Vendor specific
------------------------------------------------------------------------------
_______________________________________________
Smartmontools-database mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
