--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.10.0-514.2.2.el7.x86_64] (local
build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ03ABB300
Firmware Version: JP050U
User Capacity: 3,000,592,982,016 bytes [3.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Fri Dec 30 11:34:50 2016 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 128 (minimum power consumption without standby)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART STATUS RETURN: incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 518) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate PO-R-- 100 100 050 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--K 100 100 001 - 5226
4 Start_Stop_Count -O--CK 100 100 000 - 16
5 Reallocated_Sector_Ct PO--CK 100 100 050 - 0
7 Seek_Error_Rate PO-R-- 100 100 050 - 0
8 Seek_Time_Performance P-S--- 100 100 050 - 0
9 Power_On_Hours -O--CK 100 100 000 - 1
10 Spin_Retry_Count PO--CK 100 100 030 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 3
191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
192 Power-Off_Retract_Count -O--CK 100 100 000 - 1
193 Load_Cycle_Count -O--CK 100 100 000 - 26
194 Temperature_Celsius -O---K 100 100 000 - 31 (Min/Max 7/32)
196 Reallocated_Event_Count -O--CK 100 100 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
220 Disk_Shift -O---- 100 100 000 - 0
222 Loaded_Hours -O--CK 100 100 000 - 0
223 Load_Retry_Count -O--CK 100 100 000 - 0
224 Load_Friction -O---K 100 100 000 - 0
226 Load-in_Time -OS--K 100 100 000 - 260
240 Head_Flying_Hours P----- 100 100 001 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters
0x24 GPL R/O 12288 Current Device Internal Status Data log
0x25 GPL R/O 12288 Saved Device Internal Status Data log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa7 GPL VS 8 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 1 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 1 (0x0001)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 31 Celsius
Power Cycle Min/Max Temperature: 7/32 Celsius
Lifetime Min/Max Temperature: 7/32 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: 0/60 Celsius
Temperature History Size (Index): 478 (68)
Index Estimated Time Temperature Celsius
69 2016-12-30 03:37 ? -
... ..(409 skipped). .. -
1 2016-12-30 10:27 ? -
2 2016-12-30 10:28 8 -
3 2016-12-30 10:29 10 -
4 2016-12-30 10:30 12 -
5 2016-12-30 10:31 14 -
6 2016-12-30 10:32 15 -
7 2016-12-30 10:33 17 -
8 2016-12-30 10:34 18 -
9 2016-12-30 10:35 19 -
10 2016-12-30 10:36 20 *
11 2016-12-30 10:37 21 **
12 2016-12-30 10:38 22 ***
13 2016-12-30 10:39 23 ****
14 2016-12-30 10:40 ? -
15 2016-12-30 10:41 26 *******
16 2016-12-30 10:42 26 *******
17 2016-12-30 10:43 27 ********
18 2016-12-30 10:44 ? -
19 2016-12-30 10:45 27 ********
20 2016-12-30 10:46 28 *********
21 2016-12-30 10:47 28 *********
22 2016-12-30 10:48 ? -
23 2016-12-30 10:49 28 *********
24 2016-12-30 10:50 29 **********
25 2016-12-30 10:51 29 **********
26 2016-12-30 10:52 29 **********
27 2016-12-30 10:53 ? -
28 2016-12-30 10:54 29 **********
29 2016-12-30 10:55 29 **********
30 2016-12-30 10:56 30 ***********
31 2016-12-30 10:57 ? -
32 2016-12-30 10:58 29 **********
33 2016-12-30 10:59 29 **********
34 2016-12-30 11:00 30 ***********
35 2016-12-30 11:01 ? -
36 2016-12-30 11:02 30 ***********
37 2016-12-30 11:03 30 ***********
38 2016-12-30 11:04 30 ***********
39 2016-12-30 11:05 ? -
40 2016-12-30 11:06 30 ***********
41 2016-12-30 11:07 30 ***********
42 2016-12-30 11:08 30 ***********
43 2016-12-30 11:09 ? -
44 2016-12-30 11:10 29 **********
45 2016-12-30 11:11 30 ***********
46 2016-12-30 11:12 30 ***********
47 2016-12-30 11:13 30 ***********
48 2016-12-30 11:14 ? -
49 2016-12-30 11:15 30 ***********
50 2016-12-30 11:16 30 ***********
51 2016-12-30 11:17 30 ***********
52 2016-12-30 11:18 ? -
53 2016-12-30 11:19 30 ***********
54 2016-12-30 11:20 30 ***********
55 2016-12-30 11:21 30 ***********
56 2016-12-30 11:22 32 *************
57 2016-12-30 11:23 32 *************
58 2016-12-30 11:24 ? -
59 2016-12-30 11:25 31 ************
... ..( 2 skipped). .. ************
62 2016-12-30 11:28 31 ************
63 2016-12-30 11:29 ? -
64 2016-12-30 11:30 31 ************
65 2016-12-30 11:31 31 ************
66 2016-12-30 11:32 31 ************
67 2016-12-30 11:33 ? -
68 2016-12-30 11:34 31 ************
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics (GP Log 0x04)
Page Offset Size Value Description
1 ===== = = == General Statistics (rev 2) ==
1 0x008 4 3 Lifetime Power-On Resets
1 0x010 4 1 Power-on Hours
1 0x018 6 369138 Logical Sectors Written
1 0x020 6 3330 Number of Write Commands
1 0x028 6 498879 Logical Sectors Read
1 0x030 6 5139 Number of Read Commands
2 ===== = = == Free-Fall Statistics (rev 1) ==
2 0x010 4 0 Overlimit Shock Events
3 ===== = = == Rotating Media Statistics (rev 1) ==
3 0x008 4 0 Spindle Motor Power-on Hours
3 0x010 4 0 Head Flying Hours
3 0x018 4 26 Head Load Events
3 0x020 4 0 Number of Reallocated Logical Sectors
3 0x028 4 0 Read Recovery Attempts
3 0x030 4 0 Number of Mechanical Start Failures
4 ===== = = == General Errors Statistics (rev 1) ==
4 0x008 4 0 Number of Reported Uncorrectable Errors
4 0x010 4 0 Resets Between Cmd Acceptance and Completion
5 ===== = = == Temperature Statistics (rev 1) ==
5 0x008 1 31 Current Temperature
5 0x010 1 -~ Average Short Term Temperature
5 0x018 1 -~ Average Long Term Temperature
5 0x020 1 32 Highest Temperature
5 0x028 1 7 Lowest Temperature
5 0x030 1 -~ Highest Average Short Term Temperature
5 0x038 1 -~ Lowest Average Short Term Temperature
5 0x040 1 -~ Highest Average Long Term Temperature
5 0x048 1 -~ Lowest Average Long Term Temperature
5 0x050 4 0 Time in Over-Temperature
5 0x058 1 60 Specified Maximum Operating Temperature
5 0x060 4 0 Time in Under-Temperature
5 0x068 1 0 Specified Minimum Operating Temperature
6 ===== = = == Transport Statistics (rev 1) ==
6 0x008 4 0 Number of Hardware Resets
6 0x018 4 0 Number of Interface CRC Errors
7 ===== = = == Solid State Device Statistics (rev 1) ==
|_ ~ normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 9 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 0 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today. http://sdm.link/xeonphi
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
