Please find attached a submission for the disk TOSHIBA THNSNJ256GVNU
smartctl 6.5 2016-05-07 r4318 [i686-w64-mingw32-win7] (sf-6.5-1)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA THNSNJ256GVNU
Firmware Version: JUTA0101
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: < 1.8 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2 (minor revision not indicated)
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Sun Mar 12 07:35:17 2017 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 112) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate -O-R-- 099 092 000 - 0
2 Throughput_Performance P-S--- 100 100 050 - 0
3 Spin_Up_Time POS--- 100 100 050 - 0
5 Reallocated_Sector_Ct PO--C- 100 100 050 - 0
7 Unknown_SSD_Attribute PO-R-- 100 100 050 - 0
8 Unknown_SSD_Attribute P-S--- 100 100 050 - 0
9 Power_On_Hours -O--C- 100 100 000 - 438
10 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
12 Power_Cycle_Count -O--C- 100 100 000 - 287
167 Unknown_Attribute -O---K 100 100 000 - 0
168 Unknown_Attribute -O--C- 100 100 000 - 3
169 Unknown_Attribute PO--C- 100 100 010 - 100
170 Unknown_Attribute PO--C- 100 100 010 - 0
173 Unknown_Attribute PO--C- 200 200 100 - 0
175 Program_Fail_Count_Chip PO--C- 100 100 010 - 0
192 Power-Off_Retract_Count -O--C- 100 100 000 - 25
194 Temperature_Celsius -O---K 062 046 000 - 38 (Min/Max 18/54)
197 Current_Pending_Sector -O--C- 100 100 000 - 0
240 Unknown_SSD_Attribute PO--C- 100 100 050 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 51 Comprehensive SMART error log
0x03 GPL R/O 64 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (64 sectors)
Device Error Count: 65535 (device log contains only the most recent 256 errors)
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 65535 [118] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f0 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 a0 00 00 01 d8 eb 8e 40 00 00:00:12.307 READ FPDMA QUEUED
60 00 40 00 98 00 00 02 94 7f fa 40 00 00:00:12.307 READ FPDMA QUEUED
61 00 08 00 90 00 00 1c 46 16 18 40 00 00:00:12.307 WRITE FPDMA QUEUED
60 00 40 00 88 00 00 01 2d 9d 22 40 00 00:00:12.290 READ FPDMA QUEUED
61 00 08 00 80 00 00 00 66 d1 38 40 00 00:00:12.290 WRITE FPDMA QUEUED
Error 65534 [117] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 10 00 00 01 8a a7 20 40 00 Error: WP at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
61 00 08 00 d8 00 00 00 66 d1 40 40 00 00:00:12.183 WRITE FPDMA QUEUED
61 00 48 00 d0 00 00 00 66 d3 30 40 00 00:00:12.183 WRITE FPDMA QUEUED
60 00 08 00 c8 00 00 00 6b 0a 78 40 00 00:00:12.132 READ FPDMA QUEUED
60 00 08 00 c0 00 00 00 a1 e5 10 40 00 00:00:12.100 READ FPDMA QUEUED
61 00 01 00 b8 00 00 00 b8 9d 58 40 00 00:00:12.045 WRITE FPDMA QUEUED
Error 65533 [116] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 48 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 f0 00 00 02 1c 7a c8 40 00 00:00:11.900 READ FPDMA QUEUED
60 00 08 00 e8 00 00 02 94 87 64 40 00 00:00:11.885 READ FPDMA QUEUED
60 00 08 00 d8 00 00 00 6c 9f 20 40 00 00:00:11.884 READ FPDMA QUEUED
60 00 08 00 d0 00 00 02 7a d3 08 40 00 00:00:11.884 READ FPDMA QUEUED
60 00 40 00 c8 00 00 03 33 4a 20 40 00 00:00:11.884 READ FPDMA QUEUED
Error 65532 [115] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 70 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 03 00 20 00 00 03 1f d5 dd 40 00 00:00:11.859 READ FPDMA QUEUED
60 00 05 00 18 00 00 03 35 3a 00 40 00 00:00:11.545 READ FPDMA QUEUED
60 00 18 00 10 00 00 03 33 5d 15 40 00 00:00:11.529 READ FPDMA QUEUED
60 00 08 00 08 00 00 00 68 ea 10 40 00 00:00:11.528 READ FPDMA QUEUED
60 00 08 00 00 00 00 02 4d 3f b8 40 00 00:00:11.527 READ FPDMA QUEUED
Error 65531 [114] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 30 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 00 00 00 01 73 07 d2 40 00 00:00:11.463 READ FPDMA QUEUED
60 00 b4 00 f8 00 00 01 e1 6b 60 40 00 00:00:11.462 READ FPDMA QUEUED
60 00 08 00 f0 00 00 02 1c 77 20 40 00 00:00:11.462 READ FPDMA QUEUED
60 00 08 00 e0 00 00 00 6a 14 30 40 00 00:00:11.462 READ FPDMA QUEUED
60 00 08 00 c8 00 00 03 01 01 00 40 00 00:00:11.462 READ FPDMA QUEUED
Error 65530 [113] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 20 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 20 00 28 00 00 03 33 5f 75 40 00 00:00:11.430 READ FPDMA QUEUED
60 00 40 00 18 00 00 00 21 f6 92 40 00 00:00:11.430 READ FPDMA QUEUED
60 00 20 00 10 00 00 01 2d bb 28 40 00 00:00:11.229 READ FPDMA QUEUED
60 00 40 00 08 00 00 01 73 05 e0 40 00 00:00:11.122 READ FPDMA QUEUED
60 00 40 00 00 00 00 00 3d 9d 60 40 00 00:00:11.122 READ FPDMA QUEUED
Error 65529 [112] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 f8 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 40 00 10 00 00 01 25 a3 a2 40 00 00:00:15.867 READ FPDMA QUEUED
60 00 80 00 08 00 00 01 93 63 88 40 00 00:00:15.850 READ FPDMA QUEUED
60 00 08 00 00 00 00 00 6c c4 48 40 00 00:00:15.850 READ FPDMA QUEUED
60 00 08 00 f8 00 00 01 8a a7 20 40 00 00:00:15.850 READ FPDMA QUEUED
60 00 18 00 f0 00 00 01 25 60 1a 40 00 00:00:15.850 READ FPDMA QUEUED
Error 65528 [111] occurred at disk power-on lifetime: 438 hours (18 days + 6
hours)
When the command that caused the error occurred, the device was active or
idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 70 00 00 01 8a a7 20 40 00 Error: UNC at LBA = 0x018aa720 =
25863968
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
60 00 03 00 d8 00 00 00 f6 92 b7 40 00 00:00:15.821 READ FPDMA QUEUED
60 00 08 00 d0 00 00 01 93 63 80 40 00 00:00:15.821 READ FPDMA QUEUED
60 00 28 00 c8 00 00 04 dc 35 3a 40 00 00:00:15.821 READ FPDMA QUEUED
60 00 20 00 c0 00 00 01 25 ac 13 40 00 00:00:15.621 READ FPDMA QUEUED
61 00 01 00 b8 00 00 00 22 fc f8 40 00 00:00:15.587 WRITE FPDMA QUEUED
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed: read failure 00% 406
635416
# 2 Short offline Completed without error 00% 371 -
# 3 Short offline Completed without error 00% 274 -
# 4 Short offline Completed without error 00% 202 -
# 5 Short offline Completed without error 00% 109 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 3 (0x0003)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 38 Celsius
Power Cycle Min/Max Temperature: 24/38 Celsius
Lifetime Min/Max Temperature: 18/54 Celsius
Under/Over Temperature Limit Count: 0/0
Vendor specific:
00 00 04 00 01 01 00 05 05 00 00 00 00 00 00 00
00 01 00 00 f4 13 18 00 02 02 00 00 00 00 00 06
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 5/40 Celsius
Min/Max Temperature Limit: 0/80 Celsius
Temperature History Size (Index): 128 (0)
Index Estimated Time Temperature Celsius
1 2017-03-12 05:28 43 ************************
... ..(112 skipped). .. ************************
114 2017-03-12 07:21 43 ************************
115 2017-03-12 07:22 ? -
116 2017-03-12 07:23 27 ********
117 2017-03-12 07:24 ? -
... ..( 2 skipped). .. -
120 2017-03-12 07:27 ? -
121 2017-03-12 07:28 32 *************
122 2017-03-12 07:29 34 ***************
123 2017-03-12 07:30 35 ****************
124 2017-03-12 07:31 36 *****************
125 2017-03-12 07:32 37 ******************
126 2017-03-12 07:33 37 ******************
127 2017-03-12 07:34 38 *******************
0 2017-03-12 07:35 38 *******************
SCT Error Recovery Control:
Read: 600 (60.0 seconds)
Write: 600 (60.0 seconds)
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 2) ==
0x01 0x008 4 287 --- Lifetime Power-On Resets
0x01 0x018 6 1480544217 --- Logical Sectors Written
0x01 0x020 6 24980205 --- Number of Write Commands
0x01 0x028 6 1579365109 --- Logical Sectors Read
0x01 0x030 6 27722663 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 132980 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 38 --- Current Temperature
0x05 0x010 1 30 --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 52 --- Highest Temperature
0x05 0x028 1 23 --- Lowest Temperature
0x05 0x030 1 41 --- Highest Average Short Term Temperature
0x05 0x038 1 25 --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 - --- Lowest Average Long Term Temperature
0x05 0x050 4 1400 --- Time in Over-Temperature
0x05 0x058 1 40 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 5 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 673 --- Number of Hardware Resets
0x06 0x018 4 3 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 4 4 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 5 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
------------------------------------------------------------------------------
Announcing the Oxford Dictionaries API! The API offers world-renowned
dictionary content that is easy and intuitive to access. Sign up for an
account today to start using our lexical data to power your apps and
projects. Get started today and enter our developer competition.
http://sdm.link/oxford
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
