I populate the Intel SSD on my machine, and install the latest smart tool version of smartmontools-6.5, but the cannot get the smart info of it , please check the info as below and try to add the type of SSD into smartctl database,
The whole smart info are in the attachment, Thank you very much! smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2BB016T7 Serial Number: PHDV624300BN1P6KGN LU WWN Device Id: 5 5cd2e4 04c7bb318 Firmware Version: N2010112 User Capacity: 1,600,321,314,816 bytes [1.60 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: Solid State Device Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Fri May 26 18:26:39 2017 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-3.10.0] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSC2BB016T7
Serial Number: PHDV624300BN1P6KGN
LU WWN Device Id: 5 5cd2e4 04c7bb318
Firmware Version: N2010112
User Capacity: 1,600,321,314,816 bytes [1.60 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri May 26 18:26:39 2017 CST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always
- 2093
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 6
170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always
- 0
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 5
175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always
- 81683757910
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always
- 0
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always
- 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always
- 0
190 Airflow_Temperature_Cel 0x0022 062 058 000 Old_age Always
- 38 (Min/Max 25/42)
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always
- 5
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 38
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always
- 0
199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always
- 0
225 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 13329
226 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 0
227 Unknown_SSD_Attribute 0x0032 100 100 000 Old_age Always
- 4
228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always
- 125624
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always
- 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always
- 0
234 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 0
241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always
- 13329
242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always
- 563
243 Unknown_Attribute 0x0032 100 100 000 Old_age Always
- 26915
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
smime.p7s
Description: S/MIME cryptographic signature
------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________ Smartmontools-database mailing list Smartmontools-database@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/smartmontools-database
