Please find attached a submission for the disk INTEL SSDSCKKF256G8H
smartctl 6.6 2017-11-05 r4594 [x86_64-w64-mingw32-w10-1709] (sf-6.6-1)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: INTEL SSDSCKKF256G8H
Firmware Version: LHFH03N
User Capacity: 256,060,514,304 bytes [256 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: M.2
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 (minor revision not indicated)
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Thu May 31 13:49:52 2018 GMTST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Disabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Write SCT (Get) Feature Control Command failed: Input/output error
Wt Cache Reorder: Unknown (SCT Feature Control command failed)
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x02) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 100) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 15) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 002 - 0
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
9 Power_On_Hours -O--CK 100 100 000 - 4
12 Power_Cycle_Count -O--CK 100 100 000 - 32
171 Unknown_Attribute -O--CK 100 100 000 - 0
172 Unknown_Attribute -O--CK 100 100 000 - 0
173 Unknown_Attribute PO--CK 100 100 005 - 393216
174 Unknown_Attribute -O--CK 100 100 000 - 21
176 Erase_Fail_Count_Chip -O---K 100 100 000 - 492
183 Runtime_Bad_Block -O--CK 100 100 000 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Reported_Uncorrect -O--CK 100 100 000 - 0
188 Command_Timeout -O--CK 100 100 000 - 0
194 Temperature_Celsius -O---K 037 053 000 - 37 (Min/Max 20/43)
198 Offline_Uncorrectable ----CK 100 100 000 - 0
199 UDMA_CRC_Error_Count -O--CK 100 100 000 - 0
201 Unknown_SSD_Attribute PO---K 100 100 005 - 100
241 Total_LBAs_Written -O--CK 100 100 000 - 4753
242 Total_LBAs_Read -O--CK 100 100 000 - 2351
243 Unknown_Attribute -O--CK 100 100 000 - 9083
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 GPL,SL R/O 1 Summary SMART error log
0x02 GPL,SL R/O 1 Comprehensive SMART error log
0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 GPL,SL R/O 1 SMART self-test log
0x07 GPL,SL R/O 1 Extended self-test log
0x09 GPL,SL R/W 1 Selective self-test log
0x10 GPL,SL R/O 1 NCQ Command Error log
0x11 GPL,SL R/O 1 SATA Phy Event Counters log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xdf GPL,SL VS 1 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 4 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 0 (0x0000)
SCT Support Level: 0
Device State: Active (0)
Current Temperature: 47 Celsius
Power Cycle Min/Max Temperature: 27/54 Celsius
Lifetime Min/Max Temperature: 23/66 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/100 Celsius
Min/Max Temperature Limit: 0/100 Celsius
Temperature History Size (Index): 128 (94)
Index Estimated Time Temperature Celsius
95 2018-05-31 11:42 ? -
... ..( 31 skipped). .. -
127 2018-05-31 12:14 ? -
0 2018-05-31 12:15 31 ************
1 2018-05-31 12:16 34 ***************
2 2018-05-31 12:17 34 ***************
3 2018-05-31 12:18 34 ***************
4 2018-05-31 12:19 35 ****************
5 2018-05-31 12:20 36 *****************
6 2018-05-31 12:21 36 *****************
7 2018-05-31 12:22 25 ******
8 2018-05-31 12:23 29 **********
9 2018-05-31 12:24 23 ****
10 2018-05-31 12:25 32 *************
11 2018-05-31 12:26 32 *************
12 2018-05-31 12:27 25 ******
13 2018-05-31 12:28 46 ***************************
14 2018-05-31 12:29 41 **********************
15 2018-05-31 12:30 36 *****************
16 2018-05-31 12:31 36 *****************
17 2018-05-31 12:32 36 *****************
18 2018-05-31 12:33 39 ********************
19 2018-05-31 12:34 39 ********************
20 2018-05-31 12:35 38 *******************
21 2018-05-31 12:36 44 *************************
22 2018-05-31 12:37 36 *****************
23 2018-05-31 12:38 36 *****************
24 2018-05-31 12:39 36 *****************
25 2018-05-31 12:40 38 *******************
26 2018-05-31 12:41 44 *************************
27 2018-05-31 12:42 44 *************************
28 2018-05-31 12:43 46 ***************************
29 2018-05-31 12:44 56 *************************************
30 2018-05-31 12:45 50 *******************************
31 2018-05-31 12:46 46 ***************************
32 2018-05-31 12:47 66 ***************************************+
33 2018-05-31 12:48 48 *****************************
34 2018-05-31 12:49 48 *****************************
35 2018-05-31 12:50 48 *****************************
36 2018-05-31 12:51 46 ***************************
37 2018-05-31 12:52 45 **************************
38 2018-05-31 12:53 52 *********************************
39 2018-05-31 12:54 65 ***************************************+
40 2018-05-31 12:55 42 ***********************
41 2018-05-31 12:56 42 ***********************
42 2018-05-31 12:57 33 **************
43 2018-05-31 12:58 54 ***********************************
44 2018-05-31 12:59 47 ****************************
45 2018-05-31 13:00 57 **************************************
46 2018-05-31 13:01 51 ********************************
47 2018-05-31 13:02 47 ****************************
48 2018-05-31 13:03 47 ****************************
49 2018-05-31 13:04 46 ***************************
50 2018-05-31 13:05 46 ***************************
51 2018-05-31 13:06 39 ********************
52 2018-05-31 13:07 28 *********
53 2018-05-31 13:08 27 ********
54 2018-05-31 13:09 40 *********************
55 2018-05-31 13:10 40 *********************
56 2018-05-31 13:11 40 *********************
57 2018-05-31 13:12 41 **********************
58 2018-05-31 13:13 41 **********************
59 2018-05-31 13:14 39 ********************
60 2018-05-31 13:15 39 ********************
61 2018-05-31 13:16 38 *******************
62 2018-05-31 13:17 39 ********************
63 2018-05-31 13:18 42 ***********************
64 2018-05-31 13:19 42 ***********************
65 2018-05-31 13:20 43 ************************
66 2018-05-31 13:21 42 ***********************
67 2018-05-31 13:22 44 *************************
68 2018-05-31 13:23 44 *************************
69 2018-05-31 13:24 39 ********************
70 2018-05-31 13:25 34 ***************
71 2018-05-31 13:26 34 ***************
72 2018-05-31 13:27 37 ******************
73 2018-05-31 13:28 37 ******************
74 2018-05-31 13:29 34 ***************
75 2018-05-31 13:30 37 ******************
76 2018-05-31 13:31 37 ******************
77 2018-05-31 13:32 27 ********
78 2018-05-31 13:33 39 ********************
79 2018-05-31 13:34 36 *****************
80 2018-05-31 13:35 37 ******************
81 2018-05-31 13:36 38 *******************
82 2018-05-31 13:37 33 **************
83 2018-05-31 13:38 33 **************
84 2018-05-31 13:39 34 ***************
85 2018-05-31 13:40 30 ***********
86 2018-05-31 13:41 31 ************
87 2018-05-31 13:42 32 *************
88 2018-05-31 13:43 34 ***************
89 2018-05-31 13:44 39 ********************
90 2018-05-31 13:45 54 ***********************************
91 2018-05-31 13:46 47 ****************************
92 2018-05-31 13:47 47 ****************************
93 2018-05-31 13:48 48 *****************************
94 2018-05-31 13:49 ? -
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 32 --- Lifetime Power-On Resets
0x01 0x010 4 4 --- Power-on Hours
0x01 0x018 6 311556084 --- Logical Sectors Written
0x01 0x020 6 1977452 --- Number of Write Commands
0x01 0x028 6 154087838 --- Logical Sectors Read
0x01 0x030 6 1643088 --- Number of Read Commands
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
0x04 0x010 4 21 -D- Resets Between Cmd Acceptance and
Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 48 --- Current Temperature
0x05 0x010 1 - --- Average Short Term Temperature
0x05 0x018 1 - --- Average Long Term Temperature
0x05 0x020 1 46 --- Highest Temperature
0x05 0x028 1 46 --- Lowest Temperature
0x05 0x030 1 - --- Highest Average Short Term Temperature
0x05 0x038 1 - --- Lowest Average Short Term Temperature
0x05 0x040 1 - --- Highest Average Long Term Temperature
0x05 0x048 1 - --- Lowest Average Long Term Temperature
0x05 0x050 4 0 --- Time in Over-Temperature
0x05 0x058 1 85 --- Specified Maximum Operating Temperature
0x05 0x060 4 0 --- Time in Under-Temperature
0x05 0x068 1 0 --- Specified Minimum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 110 --- Number of Hardware Resets
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 --- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0005 2 0 R_ERR response for non-data FIS
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
Smartmontools-database mailing list
Smartmontools-database@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/smartmontools-database
